Aasi Haddad, Samira Design and Manufacture of Work Clothing for Women Labors at Garment Factories [Volume 5, Issue 3, 2015, Pages 3-8]
Abassi, Zahra An Overview of Textile Bagging Behavior Based on Fabric Structural Parameters [Volume 5, Issue 3, 2015, Pages 9-17]
Abbasi, Zahra Study of the technology of a sample of Golabtun-embroidered velvet fabric of the Qajar period [Volume 13, Issue 4, 2024, Pages 32-53]
Abedi, Hamid Synthesis of nanocomposite membranes based on polybutylene terephthalate /carbon nanotube for absorption of 2-chloroethyl ethyl sulfide [Volume 9, Issue 2, 2020, Pages 20-30]
Abedi, Mohammad Investigation of Physic-Chemical Properties of Activated Carbon Fabrics Prepared from Cotton Fabric and Nonwoven Polypropylene [Volume 7, Issue 2, 2018, Pages 11-18]
Abedi tame, vida Investigating the effect of natural thickeners on the Fastness of Thermochromic color in the smartening of cotton fabric [Volume 13, Issue 2, 2024, Pages 1-15]
Abghari, Armam Explaining the Continuity of Motivation, Job Satisfaction, and Job Burnout with the Mediating Role of Performance Strategies in the Textile Industry [Volume 15, Issue 2, 2026, Pages 58-81]
Abghari, ramin Explaining the Continuity of Motivation, Job Satisfaction, and Job Burnout with the Mediating Role of Performance Strategies in the Textile Industry [Volume 15, Issue 2, 2026, Pages 58-81]
Abghari, Ramin Evaluation of the relationship between variance length non-uniformity indices and Deviation Rate with SIRO-FAST tests of worsted fabrics [Volume 8, Issue 4, 2020, Pages 15-27]
Abghari, Ramin Application of Response Surface Methodology and FEM in Optimization Fabric Bagging Deformation in Stenter Machine [Volume 9, Issue 1, 2020, Pages 71-90]
Abghari, Ramin Fabrication of ZnTiO₃/Cellulose Nanocomposite Nanofibers Derived from Pine Cone Waste via Electrospinning [(Articles in Press)]
Abghary, Mohammad Javad Evaluation of strain and deformation of the surface of woven fabrics using image correlation method [Volume 11, Issue 4, 2023, Pages 26-40]
Abniki, Milad The process of removing paratoleic acid by advanced oxidation process from the effluent of terephthalic acid production in textile fiber production industries [Volume 12, Issue 1, 2023, Pages 17-26]
Abtahi, S.M. Investigating the Effect of Textile Fibers on Ductility of Bitumen [Volume 1, Issue 1, 2012, Pages 31-34]
Adeli, B. Investigation on the Effect of Heat setting on Twist Liveliness and Tensile Properties of Cotton-Covered Polyester Core Spun Yarns [Volume 2, Issue 1, 2012, Pages 27-31]
Adeli, Omid Ali Identifying and Prioritizing the Most Important Factors Affecting the Willingness of Domestic Consumers to Buy Foreign Clothes- Case Study in Qom Province [Volume 11, Issue 1, 2022, Pages 28-46]
Adosi, , Bentolhoda Investigation of experimental and simulation performance of the flexural performance of cementitious composites reinforced with 3D weft knitted fabrics [Volume 14, Issue 2, 2025, Pages 1-18]
Afrashi, Mehran Fabricating the Polymeric Micro-Platelets via Electro-Centrifuge Spinning System [Volume 6, Issue 4, 2018, Pages 39-45]
Afrashteh, Siavash Effect of Geometrical Parameters of the Yarn Channel in an Intermingling Jet on Nip Structure and Stability of Textured Yarn [Volume 2, Issue 4, 2013, Pages 195-200]
Afrashteh, Siavash Factors Affecting Consumer Willingness to Pay for Products Based on Iranian - Islamic Fashion in Mazandaran province [Volume 11, Issue 3, 2022, Pages 68-91]
Afrashteh, Siavash A comparative study of surrealism style in the works of Salvador Dali and Iran Droudy and its application in conceptual clothing design [Volume 11, Issue 4, 2023, Pages 56-76]
Afrashteh, Siavash A Review of Sustainability and Development Factors in Iran'sTextile and Clothing Industry [Volume 12, Issue 3, 2023, Pages 93-125]
Afrashteh, Siavash Optimization of physical properties and surface modification of polyester fabric coated with graphene oxide/polyaniline using statistical analysis of central composite design(CCD) [(Articles in Press)]
Afzali, Mahboobe Introducing a method for measuring the hand dimensions to prepare the glove using depth camera [Volume 8, Issue 4, 2020, Pages 5-13]
Agajani, hasanali Hierarchical Structuring of Organizational Innovative Culture Dimensions Based on Transformational Leadership Style in Iranian Fashion Design and Dressmaking Schools Using Interpretive Structural Modeling (ISM) Method [Volume 14, Issue 3, 2025, Pages 69-89]
Aghaei, Hamid Reza Experimental and numerical investigation of shear modulus of composites reinforced with 3D orthogonal fabric [Volume 12, Issue 1, 2023, Pages 51-64]
Aghajan, Maryam The Role of Intergenerational Communication (Child-Parent) On Brand Equity in Clothing Purchase at Different Levels of Situational Involvement [Volume 10, Issue 4, 2021, Pages 71-90]
Aghajani, Fatemeh The study of the effect of Clothing related attributes on the brand equity of Men and woman (CASE STUDY: LC Wikiki of Mazandaran province [Volume 6, Issue 4, 2018, Pages 15-27]
Aghasi, Saeed Identifying the components of digital content production in marketing in the fashion and clothing industry [Volume 13, Issue 3, 2024, Pages 39-59]
Ahmadi, Farid Providing a scale of customer delight in textiles and clothing with a qualitative and quantitative approach [Volume 12, Issue 4, 2024, Pages 84-106]
Ahmadi, Mohamad Saleh Residual flexural strength and modulus after low-velocity impact in hybrid jute - polyester / epoxy composites [Volume 5, Issue 3, 2015, Pages 45-50]
Ahmadi, Mohammad Saleh Design and Manufacture of Work Clothing for Women Labors at Garment Factories [Volume 5, Issue 3, 2015, Pages 3-8]
Ahmadi, Mohammad Saleh Investigation of the effect of fabric physical parameters on its objective and subjective drape [Volume 12, Issue 2, 2023, Pages 1-13]
Ahmadi, M. S. Compression Strength of Braided and Filament-wound Tubular Composites [Volume 3, Issue 1, 2013, Pages 11-16]
Ahmadi, M. S. Effect of Knit Structure on Tensile Properties of Warp Knitted Geogrids [Volume 3, Issue 2, 2013, Pages 9-14]
Ahmadi, Seyed mostafa Investigation of the Parameters Affecting on the long-Term Creep Behavior of the Woven and Nonwoven Geotextile Polyester Fabrics [Volume 7, Issue 3, 2018, Pages 59-70]
Ahmadi, shervin Study on fabrication and the morphology and Rheology of nanosilica/polypropylene nanocomposite fibers [Volume 11, Issue 2, 2022, Pages 18-27]
Ahmadyar, Nesa The application of the response surface methodology for water repellency finishing of polyester and cotton fabric [Volume 7, Issue 1, 2018, Pages 11-22]
Ahmadyar, Nesa Proposing a soft hybrid computing model to improve the prediction of the quality
of seams in garments [Volume 7, Issue 3, 2018, Pages 71-80]
A. Jeddi, A. A. Effect of Knit Structure on Tensile Properties of Warp Knitted Geogrids [Volume 3, Issue 2, 2013, Pages 9-14]
Ajeli, S. Investigation into Tensional Distribution of Vertical Drape on Voil Net
Fabrics Using Finite Element Method [Volume 1, Issue 1, 2012, Pages 39-42]
Ajeli, saeed Experimental and numerical investigation of shear modulus of composites reinforced with 3D orthogonal fabric [Volume 12, Issue 1, 2023, Pages 51-64]
Ajeli, Saeed Investigation into the Energy Absorption Capacity of Reinforced Composite by
3D weft-knitted Fabrics [Volume 2, Issue 2, 2012, Pages 65-70]
Ajeli, Saeed Crease Recovery Angle of Weft-knitted Fabrics Produced by Shape Memory Polymer- Coated Yarn [Volume 3, Issue 4, 2014, Pages 9-12]
Akbari Bengar, Reza The effect of design and interior space in clothing retailers stores on the customer’s purchasing behavior [Volume 13, Issue 4, 2024, Pages 73-89]
Akbarpour, Hamid Optimization of Dyeing Properties of Polyester / Viscose Fabric Using Corona and Alkaline Pre-Treatment by Central Composite Design (CCD) Method [Volume 9, Issue 2, 2020, Pages 49-59]
Akbarpour, Hamid Improving the Electrical and Anti-bacterial Properties of Cotton Fabric Using Graphene Oxide [Volume 10, Issue 1, 2021, Pages 15-23]
Akbarpour, Hamid Comparative Study of one- and two-factors Reactive Dye Adsorption Isotherms on Cellulose Fabric using Urea, Dispersing and Penetrating auxiliary Material [Volume 10, Issue 3, 2021, Pages 1-19]
Akbarzadeh, Fatemeh Investigating the influencing factors on consumer choice based on the unusual graphic design of clothing packaging [Volume 11, Issue 4, 2023, Pages 77-90]
Akhoondi, fatemeh Design and sewing of NCPAP hats for neonatal hospitalization in NICU unit [Volume 10, Issue 1, 2021, Pages 5-13]
Akrami, Ehsan Identify the factors affecting the fashion and clothing industry with Environmental sustainability approach [Volume 9, Issue 1, 2020, Pages 21-29]
Alamdar yazdi, Aliasghar Title: Assessment of Stability in the Nano Particles of Persian Gum for Increase of Resistance in Historical Cellulose Textiles [Volume 6, Issue 2, 2017, Pages 5-12]
Alamdar Yazdi, Ali Asghar Influence of the Backrest Roll Position on the Physical and Mechanical Properties of the Produced Fabric [Volume 6, Issue 4, 2018, Pages 57-63]
Alamdar Yazdi, ALi Asghar Extracting and Clustering Stone-Wash Design in Jeans Images Using K-means Algorithm [Volume 2, Issue 4, 2013, Pages 209-215]
Aliabadi zadeh, Delaram Studying the factors affecting the clothing style of Iranian women in the 14th century AH using the MADM decision-making technique [Volume 11, Issue 2, 2022, Pages 88-108]
Aliakbari, Shiva A Study on nickel and iron removal from wastewater by polyacrylonitrile/thermoplastic polyurethane nanofibers [Volume 13, Issue 4, 2024, Pages 1-11]
Ali Bagheri, H. A Study on the Effect of Nano Organocalay on Morphology and Dyeability of Polypropylene/ Polyamide 6 Blend Nanocomposite Fibers [Volume 2, Issue 1, 2012, Pages 21-26]
Alijanlo, Shams--allah Roles of Upstream Polyethylene Terephthalate Fiber Manufacturers in Improvements of the Textile Industries Value added [Volume 4, Issue 3, 2014, Pages 49-51]
Alinaghizadeh, Elham Application of nanoclay particles in improving the functional properties of rice bran plastic composite [Volume 7, Issue 4, 2019, Pages 25-30]
Alipour, R. Investigating the Effect of Textile Fibers on Ductility of Bitumen [Volume 1, Issue 1, 2012, Pages 31-34]
Alizadeh, Najmeh Improving the Electrical and Anti-bacterial Properties of Cotton Fabric Using Graphene Oxide [Volume 10, Issue 1, 2021, Pages 15-23]
Ali Zamani, Hasan Effect of bleaching and natural dyeing on properties of PVC based wood-plastic composite [Volume 7, Issue 4, 2019, Pages 31-37]
Allah Gholi Ghasri, M.R. Extraction of Chitosan from Shrimp Shell: Characterization of Chitosan and Its Application for Removal of Reactive Blue 13 and Acid Green 3 Dyes from an Aqueous Solution [Volume 3, Issue 3, 2013, Pages 3-10]
Amani Tehrani, Mohammad Modeling of the effect of weft yarn properties and air-jet loom speed on the weft yarn arrival time and its tension [Volume 5, Issue 1, 2015, Pages 3-10]
Amirifakour, Tahere Bibliometric Analysis of Technology Transfer in Creative Industries: Past, Present, and Future with Interpretive Applications to the Carpet Industry [(Articles in Press)]
Amir nasr, E. Investigation into Tensional Distribution of Vertical Drape on Voil Net
Fabrics Using Finite Element Method [Volume 1, Issue 1, 2012, Pages 39-42]
Arami, M. Comparative Study between Microwave Assisted and Thermally Synthesized TEA based Esterquat Softeners Used as Textile Softening Agents [Volume 3, Issue 1, 2013, Pages 37-45]
Arbab, Shahram Stimuli Responsive Hydrogels and Polyacrylonitrile Gel Fibers [Volume 2, Issue 2, 2012, Pages 81-96]
Ardalani, Hossein Analysis of the Factors Affecting the Environmental Aesthetics Attitude of Clothing Consumer (Case study: Students of Islamic Azad University, Central Tehran Branch) [Volume 15, Issue 1, 2026, Pages 37-59]
Arefi, Najmeh Application of Response Surface Methodology in Optimization of Dyeing of Wool with Citrus Aurantium Leaves as Natural Dye [Volume 8, Issue 3, 2019, Pages 5-13]
Arshi, A. A Research on the Role of Relative Humidity on Adhesion Force of Plain Knitted Cotton Fabrics in Warm Environments [Volume 2, Issue 1, 2012, Pages 33-37]
Arshi, A. Prediction of Bending Behavior of Woven Fabric Using a Mechanical Model Based on the Theory of Bending of Elastic Cantilever Beam [Volume 3, Issue 3, 2013, Pages 29-38]
Arshi, Ali Characteristics and contexts affecting the evolution of Iranian clothing from European clothing in the second Qajar period [Volume 10, Issue 4, 2021, Pages 53-70]
Arshi, Ali The effect of traveller weight on twisting rate, strength, hairiness, neps and thinness and thickness points of polyester and cotton blend yarns [Volume 12, Issue 1, 2023, Pages 40-50]
Asadi Farsani, Tayebeh Evaluation of the color strength and color fastness of wool yarns dyed with colorant extracted from Syzygium aromaticum (clove) in alcoholic, acidic and alkaline solvents. [Volume 13, Issue 3, 2024, Pages 25-38]
Asgari, Mohammad hadi The Use of Meta-Heuristic Algorithm in Optimizing the Impact of Sensitive Marketing on Customer Loyalty: A Case Study in Iran's Textile and Apparel Industry [Volume 12, Issue 2, 2023, Pages 41-62]
Asgharian Jeddi, Ali Asghar An overview of the most important structural and mechanical properties of surgical meshes [Volume 8, Issue 1, 2019, Pages 59-66]
Asgharian Jeddi, Ali Asghar Investigation of sound absorption of Warp Knitted Spacer Fabric with nanofiber coating [Volume 10, Issue 2, 2021, Pages 18-25]
ASGHARIAN JEDDI, ALI ASGHAR 3D geometrical of weave unit cell and pores model and parametric analysis [Volume 14, Issue 1, 2025, Pages 46-66]
Ashjaran, Ali Study on the Properties of Bacterial Cellulose Containing Dendrimers, Plant and Chemical Materials [Volume 10, Issue 4, 2021, Pages 109-126]
Ashjaran, Ali Anti-Bacterial Finishing of Coolmax Fabric as the Basic Layer Used in Sportswear and Analysis of its Physical Properties [Volume 12, Issue 2, 2023, Pages 76-87]
Ashraf Ganjouei, Farideh Present and Test a Model in the Field of Branding Sports Products with a Mixed Approach [Volume 10, Issue 3, 2021, Pages 71-86]
Ashraf Ganjouei, Farideh Investigating the influential branding variables in women's sport products and presenting a structural model [Volume 11, Issue 4, 2023, Pages 41-55]
Askari, Gholamreza Optimization of the electroless nickel plating process on nonwoven textiles for electromagnetic waves shielding [Volume 14, Issue 4, 2026, Pages 57-78]
Askarimoghadam, Shima Visual Identity of Active Brands in the Fashion and Apparel Industry: Application of Qualitative Content Analysis and Delphi Methodologies [(Articles in Press)]
Ataeian, Arash Investigation on the Effect of Heat setting on Twist Liveliness and Tensile Properties of Cotton-Covered Polyester Core Spun Yarns [Volume 2, Issue 1, 2012, Pages 27-31]
Atighi, Milad The role of metal-organic frameworks in improving the acoustic performance of textiles and lightweight foams: A study on properties, mechanisms, and applications [(Articles in Press)]
Atyabi, Sayyedeh Rahmaneh Development of Antibacterial Cotton Wound Dressings Using Kamala Natural Dye and Bio-Mordants: Evaluating the Efficacy of Mordanting Techniques Against Nosocomial Pathogens [(Articles in Press)]
Azarmi, reyhaneh Study on the Properties of Bacterial Cellulose Containing Dendrimers, Plant and Chemical Materials [Volume 10, Issue 4, 2021, Pages 109-126]
Aziz Arabi, Fatemeh Investigation and feasibility of using bamboo yarn in the ground layer of handmade carpets with emphasis on physico-mechanical properties [Volume 14, Issue 2, 2025, Pages 19-42]
Azizi Boroujeni, ُُSaghar Production of Superfine Cotton Yarns Using PET Single Filament [Volume 3, Issue 4, 2014, Pages 3-7]
B
Baamani moghaddam, Mohammad Optimization and Prediction of Mechanical Properties of Polypropylene/Poly(butylene
terephthalate) Blend Fibers Using Response Surface Methodology [Volume 2, Issue 2, 2012, Pages 104-113]
Babaahmadi, Vahid Dyeing of wool yarns with clove and investigation of antibacterial and ultraviolet protection properties [Volume 11, Issue 4, 2023, Pages 1-14]
Babajani, Ramezan Ali Business Process Management Risks Using Failure Mode Analysis and Multi-Criteria Decision Making (Case Study of Dyeing, Printing and Finishing Factory of Baloch Industries Development) [Volume 14, Issue 4, 2026, Pages 79-94]
Badin Dahesh, Melika An overview of the most important structural and mechanical properties of surgical meshes [Volume 8, Issue 1, 2019, Pages 59-66]
Bagherzadeh, R. Flexible Fiber Nanogenerator Fabrication by Poly(vinyldene floride) Piezo-polymer [Volume 4, Issue 2, 2014, Pages 35-38]
Bahador Najaf Abadi, Shahrzad A Study on Rechargeable Antibacterial Finishing of Spacer Knitted Fabrics
by N-Halamine Compounds [Volume 2, Issue 2, 2012, Pages 71-80]
Baharloo, Zahra A review on aramid nanofibers: Manufacturing, properties, applications, and environmental challenges [(Articles in Press)]
Bahrami, Fatemeh Experimental and Numerical Analysis of Air Permeability in Nanofibrous Filters Based on Three-Dimensional Structural Reconstruction and SEM Image Processing [(Articles in Press)]
Bahrami, Parham Factors affecting customer-oriented behavior in the organic clothing industry [Volume 15, Issue 2, 2026, Pages 42-57]
Bakhshi, Mitra Investigation of the Parameters Affecting on the long-Term Creep Behavior of the Woven and Nonwoven Geotextile Polyester Fabrics [Volume 7, Issue 3, 2018, Pages 59-70]
Barani, Hossein Investigation on color and antibacterial properties of woolen yarn dyed with fruit of Ailanthus altissima tree [Volume 9, Issue 4, 2020, Pages 25-33]
Barani, Hossein Evaluation of dyeing process and colorfastness of wool fibers dyed with Centaurea behen L. [Volume 13, Issue 4, 2024, Pages 12-31]
Barari, Fatemeh Presenting a marketing model for the development of sustainable fashion and clothing industry after the Corona epidemic [Volume 13, Issue 4, 2024, Pages 54-72]
Baseri, Somayeh Review on Application of Supercritical Fluids in Producing Conductive Polymeric Fibers [Volume 7, Issue 2, 2018, Pages 25-36]
Baseri, Somayeh Optimization of Wool Dyeing Process with Z. Spina-Christ Root Dye by RSM [Volume 14, Issue 2, 2025, Pages 43-67]
Bateni, Farzaneh Investigating The Properties of Bacterial Nanocellulosecoated Cotton Spunlace for Foot Moisture Management [Volume 14, Issue 3, 2025, Pages 1-12]
Bayatlou, F. Effect of Raw Material on Physical and Mechanical Properties of Boucle Fancy Yarns and Weft Knitted Fabrics [Volume 2, Issue 3, 2012, Pages 175-180]
Bayegan, Yahya Investigation of parameters affecting dyeing of merino wool yarn with chicory leaves plant (Cichorium intybus L) [Volume 9, Issue 4, 2020, Pages 17-23]
Bazgir, S. The Effect of Governing Parameters on Fibers Diameters’ Average and Electric Current of Electrospun Nylon 6 Nanofiber [Volume 1, Issue 1, 2012, Pages 25-30]
Berendjchi, Amir Hosein Starch Fibers Production by Wet Spinning in Rotational Coagulation Bath [Volume 2, Issue 4, 2013, Pages 201-207]
Bidoki, S.M. Photo-oxidation of Disperse Dyes Wastewaters with Various Structures by UV/H2O2 Process [Volume 2, Issue 3, 2012, Pages 167-173]
Bidoki, S.M. Comparative Study between Microwave Assisted and Thermally Synthesized TEA based Esterquat Softeners Used as Textile Softening Agents [Volume 3, Issue 1, 2013, Pages 37-45]
Bidoki, S.Mansour Evaluation of strain and deformation of the surface of woven fabrics using image correlation method [Volume 11, Issue 4, 2023, Pages 26-40]
Bisadi, Mahjobeh Investigating the effect of mordant type, temperature and pH of dyeing bath on the color properties of acrylic yarn dyed with turmeric. [Volume 11, Issue 4, 2023, Pages 15-25]
Bordbar, Gholamreza A clarification of relationship between strategic human resource management and firm performance.
( case sudy: The Yazd elected spinning factories.) [Volume 6, Issue 3, 2017, Pages 37-43]
Boroomand, Mohammad Hasan Influence of the Backrest Roll Position on the Physical and Mechanical Properties of the Produced Fabric [Volume 6, Issue 4, 2018, Pages 57-63]
Brouki Milan, Peiman Demand for nanotech masks with superior protection in the world after Corona [Volume 9, Issue 1, 2020, Pages 39-49]
C
Charkhchi, Roxaneh Bibliometric Analysis of Technology Transfer in Creative Industries: Past, Present, and Future with Interpretive Applications to the Carpet Industry [(Articles in Press)]
Cheraghali, M. H. Influential Factors on Proper Implementation of Organizational Resource Programming in Spinning Industry: Case Study of Mazandaran Region [Volume 3, Issue 2, 2013, Pages 15-22]
D
Dabirian, Hadi Comparison The Behavior of Monolithic and Non-monolithic Textile Reinforced Composite elbows under Hydrostatic Pressure [Volume 9, Issue 3, 2020, Pages 29-36]
Dabiryan, H. Invetigation of Effect of Production System on Productivityof Shirt Classic-Line Production [Volume 1, Issue 1, 2012, Pages 19-24]
Dadashian, Fatemeh Investigation of Physic-Chemical Properties of Activated Carbon Fabrics Prepared from Cotton Fabric and Nonwoven Polypropylene [Volume 7, Issue 2, 2018, Pages 11-18]
Dadashian, Fatemeh Review of extraction methods of Keratin from fibers and its applications as medical textiles [Volume 9, Issue 1, 2020, Pages 5-19]
Dadgar, Mehran Measuring The Degree Of Twist Set Based On The Twist Intrinsic Definition And Its Prediction By Artificial Neural Network [Volume 13, Issue 2, 2024, Pages 64-83]
Dadgar, Mehran A Data-Driven Framework for Classification and Similarity Assessment of Persian Carpets Using K-Means Algorithm [Volume 15, Issue 2, 2026, Pages 20-41]
Dahesh, neda Evaluation of Red color in Amo-Oghli Carpet to Identify Dyeing Formulation [Volume 8, Issue 4, 2020, Pages 49-58]
Darvishi, F. Global purchasing in clothing supply chain: An integrated fuzzy-group multi-attribute decision making approach [Volume 7, Issue 3, 2018, Pages 5-18]
Dastan, Tohid Residual flexural strength and modulus after low-velocity impact in hybrid jute - polyester / epoxy composites [Volume 5, Issue 3, 2015, Pages 45-50]
Davatgar, Maral Effect of the Preparation Process on the Properties of Bacterial Cellulose/Polyethylene Glycol Nanocomposites as Bio-based Synthetic Leather [(Articles in Press)]
Davodabadi Farahani, Mohammad Investigating The Properties of Bacterial Nanocellulosecoated Cotton Spunlace for Foot Moisture Management [Volume 14, Issue 3, 2025, Pages 1-12]
Davodirokabadi,, Abolfazl Identification of Dimensions and Components of Digital Marketing Tools in Startups Active in Iran’s fashion and clothing industry [Volume 12, Issue 4, 2024, Pages 35-61]
Davodi-roknabadi, Abolfazl Structural Equations Analysis and Design of Polyimide 6,6 Fabrics Multifunctional Properties Finished with Silver Nanoparticles and Butane tetra carboxylic acid using Mediatory Property of Hydrophilicity [Volume 9, Issue 2, 2020, Pages 5-19]
Davodiroknabadi, Abolfazl Identification and analysis of drivers affecting the future of digital branding in Iran's carpet industry [Volume 11, Issue 3, 2022, Pages 92-115]
Davodiroknabadi, Abolfazl Fabrication of ZnTiO₃/Cellulose Nanocomposite Nanofibers Derived from Pine Cone Waste via Electrospinning [(Articles in Press)]
Davodi Roknabadi, Abolfazl Analysis of the Factors Affecting the Environmental Aesthetics Attitude of Clothing Consumer (Case study: Students of Islamic Azad University, Central Tehran Branch) [Volume 15, Issue 1, 2026, Pages 37-59]
Davodi Roknabadi, Abolfazl Visual Identity of Active Brands in the Fashion and Apparel Industry: Application of Qualitative Content Analysis and Delphi Methodologies [(Articles in Press)]
Davodi-Roknabadi, Abolfazl Optimization of Madder and Walnut hull Biodegradable Compounds to Mothproofing of Wool Fabrics against A. verbasci using Pad-batch Method [Volume 8, Issue 4, 2020, Pages 59-68]
Davoodi, Sayyed mohammad reza Identifying the components of digital content production in marketing in the fashion and clothing industry [Volume 13, Issue 3, 2024, Pages 39-59]
Davoodi Roknabadi, Abolfazl Effect of the Preparation Process on the Properties of Bacterial Cellulose/Polyethylene Glycol Nanocomposites as Bio-based Synthetic Leather [(Articles in Press)]
Davoudabadi Farahani, Mohammad Investigation of sound absorption of Warp Knitted Spacer Fabric with nanofiber coating [Volume 10, Issue 2, 2021, Pages 18-25]
Davoudabadi Farahani, Mohammad Business Process Management Risks Using Failure Mode Analysis and Multi-Criteria Decision Making (Case Study of Dyeing, Printing and Finishing Factory of Baloch Industries Development) [Volume 14, Issue 4, 2026, Pages 79-94]
Davoudabadi Farahani, Mohammad Evaluation of the characteristics of tilapia leather produced in Iran for use in clothing with a sustainable fashion approach [(Articles in Press)]
Davoudabadi Farahani, Mohammad The role of metal-organic frameworks in improving the acoustic performance of textiles and lightweight foams: A study on properties, mechanisms, and applications [(Articles in Press)]
Dehghan, Fatemeh Fabrication and characterization of polycaprolactone-polyethylene glycol nanofibers containing chamomile extract for wound healing application [Volume 10, Issue 3, 2021, Pages 20-33]
Dehghan, N. Image Processing for Optimization of Thresholding Methods and Determination of Nanofibers Diameter [Volume 3, Issue 3, 2013, Pages 17-28]
Dehghan, Neda Review of Heat Transfer in Textiles, Part 1: Experimental Studies [Volume 8, Issue 3, 2019, Pages 33-45]
Dehghan, Neda Heat Transfer in Textiles, Part 2: Review of Modeling Studies [Volume 8, Issue 3, 2019, Pages 51-63]
Dehghan-banadaki, Zahra Investigation of the Parameters Affecting on the long-Term Creep Behavior of the Woven and Nonwoven Geotextile Polyester Fabrics [Volume 7, Issue 3, 2018, Pages 59-70]
Dehghani-Zahedani, Mehdi Optimization of Madder and Walnut hull Biodegradable Compounds to Mothproofing of Wool Fabrics against A. verbasci using Pad-batch Method [Volume 8, Issue 4, 2020, Pages 59-68]
Dilamian, Mandana Preparation of Polyurethane (core) and chitosan/poly (ethylene oxide) (shell) composite nanofiber [Volume 7, Issue 2, 2018, Pages 37-46]
Dinari, Mohammad a new method to improve dyeing properties of cotton substrate by the introduction of urea hydrochloride / ethylene diamine deep eutectic solvent as an intra crystalline swelling agent [Volume 10, Issue 2, 2021, Pages 1-17]
Dodangeh, M. Synthesis of a Novel Disperse Dye Based on Benzothiazol
and Investigation of Its Dyeing Properties on Polyester Fibres [Volume 1, Issue 1, 2012, Pages 35-38]
Doshmanfana, Soroor A Review for Application of machine vision in carpet Industry [Volume 7, Issue 3, 2018, Pages 39-58]
E
Ebrahimi Manesh, Ebrahim Crease Recovery Angle of Weft-knitted Fabrics Produced by Shape Memory Polymer- Coated Yarn [Volume 3, Issue 4, 2014, Pages 9-12]
Ebrahimzadeh, Amin Study on melt flow rate behavior of low melt co-polyester using melt flow index evaluation method [Volume 13, Issue 2, 2024, Pages 84-100]
Eghbali, Fatemeh Melt Spinning of Photoluminescent Polypropylene Fibers Using Phosphorescent Pigments [Volume 5, Issue 3, 2015, Pages 29-33]
Ekhtiyari, Esfandiar Investigation of the Parameters Affecting on the long-Term Creep Behavior of the Woven and Nonwoven Geotextile Polyester Fabrics [Volume 7, Issue 3, 2018, Pages 59-70]
Ekrami, E. Evaluation of Reactive Dye Adsorption by Chitosan-Treated Cotton Fabrics [Volume 3, Issue 2, 2013, Pages 3-8]
Emami, F. A Feasibility Study on Producing of High Tenacity Polyethylene Terephthalate Multifilament Yarn with Optimization of Drawing Process Parameters [Volume 2, Issue 1, 2012, Pages 15-20]
Emami Ghareh Hajlo, Mehdi. A Review of Sustainability and Development Factors in Iran'sTextile and Clothing Industry [Volume 12, Issue 3, 2023, Pages 93-125]
Erabi, Amir Masoud Melt Spinning of Photoluminescent Polypropylene Fibers Using Phosphorescent Pigments [Volume 5, Issue 3, 2015, Pages 29-33]
Eskandarnejad, Safdar Effect of Geometrical Parameters of the Yarn Channel in an Intermingling Jet on Nip Structure and Stability of Textured Yarn [Volume 2, Issue 4, 2013, Pages 195-200]
Eslahi, Niloofar Antibacterial finishing of cotton with silk hydrogel and chamomile extract [Volume 9, Issue 4, 2020, Pages 35-42]
Eslahi, Niloofar Dyeing of nylon fabrics with natural sumac dye using recycled feather keratin [Volume 11, Issue 1, 2022, Pages 1-10]
Eslami, Mahdiyeh Melt Spinning of Photoluminescent Polypropylene Fibers Using Phosphorescent Pigments [Volume 5, Issue 3, 2015, Pages 29-33]
Esmaeilian, N. Comparative Study between Microwave Assisted and Thermally Synthesized TEA based Esterquat Softeners Used as Textile Softening Agents [Volume 3, Issue 1, 2013, Pages 37-45]
Esmaili Salmi, Reza The process of removing paratoleic acid by advanced oxidation process from the effluent of terephthalic acid production in textile fiber production industries [Volume 12, Issue 1, 2023, Pages 17-26]
Ezazshahabi, Nazanin Experimental Investigation of the Effect of Structural Parameters of Sleeping Bag on the Thermal Protection Performance [Volume 6, Issue 4, 2018, Pages 47-56]
Ezazshahabi, Nazanin Introduction of protective gloves and their performance evaluation methods [Volume 7, Issue 3, 2018, Pages 19-28]
F
Fallahi Javadabad, saghar Personalized student mantle design for body shapes inspired by the historical city of Yazd [Volume 15, Issue 1, 2026, Pages 1-19]
Fallahzade, Mohammad Reza Investigating and modeling the effect of magnetic field shape on electrospinning process [Volume 8, Issue 2, 2019, Pages 37-47]
Farazandemehr, Elham a new method to improve dyeing properties of cotton substrate by the introduction of urea hydrochloride / ethylene diamine deep eutectic solvent as an intra crystalline swelling agent [Volume 10, Issue 2, 2021, Pages 1-17]
Farhadi, Razieh Fabricating the Polymeric Micro-Platelets via Electro-Centrifuge Spinning System [Volume 6, Issue 4, 2018, Pages 39-45]
Farokhzadeh, Mina Review on electrospinning and microstructure control of non-woven mat and its applications [Volume 7, Issue 1, 2018, Pages 47-61]
Fasahat, F. Derivation of Fabric Parameters from Simulated Imaging by Genetic Algorithm Method [Volume 3, Issue 2, 2013, Pages 47-56]
Fatahi, Farnazalsadat Quantitative Analyze of Fourier Transform Infrared Spectroscopy (FTIR) of Poly (Lactic Acid) after UV/Ozone Irradiation [Volume 8, Issue 2, 2019, Pages 47-55]
Fathi, Mohammad Reza Identification and ranking of the components of sustainable development of the garment industry of Shahrekord [Volume 12, Issue 3, 2023, Pages 55-73]
Fathi Hafeshejani, Kiamars Technology Transfer Process in the Leather and Footwear Industry: Integrating Theoretical and Empirical Evidence within a Multi-Grounded Theory Framework [Volume 15, Issue 2, 2026, Pages 82-104]
Fattahi, Farnaz-sadat Study on the Colorimetric Characteristics and Microstructural Properties of Poly(ethylene terephthalate) Fabrics after the Surface Modification with Ultraviolet Irradiation/Ozone Gas [Volume 10, Issue 3, 2021, Pages 34-48]
Fattahi, Farnaz Sadat Review on Production, Properties, and Applications of Poly(lactic acid) Fibers [Volume 5, Issue 1, 2015, Pages 11-17]
Fattahi, S. Factorial Analysis and K-Means Clustering Methods for Extraction of Human Body Size Parameters and Shape Groupings [Volume 3, Issue 3, 2013, Pages 11-16]
Fattahi, Saed Fabrication and characterization of chitosan nanofibrous scaffold containing hydroxyapatite/metal-organic framework (HAp@MOF) nanocomposite for bone tissue engineering applications [Volume 13, Issue 2, 2024, Pages 32-45]
FATTAHI, FARNAZ Investigation into the Effects of Nano-fibrous Wound Dressings on Wound Healing Process in Animal Models [Volume 8, Issue 4, 2020, Pages 29-48]
Fazeli Veisari, Elham The Role of Intergenerational Communication (Child-Parent) On Brand Equity in Clothing Purchase at Different Levels of Situational Involvement [Volume 10, Issue 4, 2021, Pages 71-90]
Fazeli Veisari, Elham The Use of Meta-Heuristic Algorithm in Optimizing the Impact of Sensitive Marketing on Customer Loyalty: A Case Study in Iran's Textile and Apparel Industry [Volume 12, Issue 2, 2023, Pages 41-62]
Fazeli Veisari, Elham Multifaceted Attractiveness of Social Media in Online Apparel Shopping: A Qualitative-Quantitative Assessment of Users’ Latent Attitudes [(Articles in Press)]
Fazeli Veisari, Mehran The Use of Meta-Heuristic Algorithm in Optimizing the Impact of Sensitive Marketing on Customer Loyalty: A Case Study in Iran's Textile and Apparel Industry [Volume 12, Issue 2, 2023, Pages 41-62]
Feiz, Mahmudi Application of Natural and Synthetic Tanning agent and Cationic Compounds for Improvement of Wash Fastness of dyed Silk, Wool and Nylon with Acid Dyes [Volume 6, Issue 2, 2017, Pages 13-18]
Foladi, fatemeh Explaining the Continuity of Motivation, Job Satisfaction, and Job Burnout with the Mediating Role of Performance Strategies in the Textile Industry [Volume 15, Issue 2, 2026, Pages 58-81]
G
Ghaderi, Alireza Investigation of the effect of fabric physical parameters on its objective and subjective drape [Volume 12, Issue 2, 2023, Pages 1-13]
Ghaemizadah, Marzieh The effect of anti-wrinkle compounds on physical properties of cellulose fabrics [Volume 8, Issue 2, 2019, Pages 15-24]
Ghajarieh, Atiyeh A review on the medical application of electrospun nanofibers [Volume 8, Issue 1, 2019, Pages 31-44]
Ghajarieh, Atiyeh A Study on nickel and iron removal from wastewater by polyacrylonitrile/thermoplastic polyurethane nanofibers [Volume 13, Issue 4, 2024, Pages 1-11]
Ghanberi, Malihe Experimental Investigation of the Effect of Structural Parameters of Sleeping Bag on the Thermal Protection Performance [Volume 6, Issue 4, 2018, Pages 47-56]
Ghani, Afsaneh Receiving the Taste of the Chaleshtor Lozenge Rug Audience Based on an Artificial Neural Networks(ANN) [Volume 13, Issue 1, 2024, Pages 52-66]
Gharagozloo Bahrami, A. B. Fabrication of Core-Shell Polyamide/Silver Nanofibers Composites [Volume 3, Issue 1, 2013, Pages 17-22]
Gharangig, Kamal e Din Investigating the effect of natural thickeners on the Fastness of Thermochromic color in the smartening of cotton fabric [Volume 13, Issue 2, 2024, Pages 1-15]
Gharanjig, K. Synthesis of a Novel Disperse Dye Based on Benzothiazol
and Investigation of Its Dyeing Properties on Polyester Fibres [Volume 1, Issue 1, 2012, Pages 35-38]
Gharanjig, K. Optimization of Dyeing Conditions of Wool FIbers with Madder Dyes and Aluminum Sulfate Mordant Based on Taguchi's Experiments [Volume 2, Issue 3, 2012, Pages 161-166]
Gharib Tehrani, Firozeh Decoratinge women's Ball Gowns using Intelligent Optical System [Volume 9, Issue 4, 2020, Pages 43-51]
Ghasemi-Mobarakeh, Laleh Investigating the antibacterial effect of wound healing with Henna extract: [Volume 7, Issue 2, 2018, Pages 19-24]
Ghasemy Yaghin, R. Brand Evaluation and Selection in Sportswear Using a Fuzzy Multi-Criteria Decision-Making Approach [Volume 8, Issue 2, 2019, Pages 5-13]
Ghasemy Yaghin, Reza Global purchasing in clothing supply chain: An integrated fuzzy-group multi-attribute decision making approach [Volume 7, Issue 3, 2018, Pages 5-18]
Ghazalnia, Marjan Effect of Ultraviolet Irradiation on Thermodynamic, Kinetic and Adsorption Isotherm of Direct dye onto Cellulose Acetate Fabric [Volume 11, Issue 1, 2022, Pages 11-27]
Ghazinezam, Fatemeh Experimental Investigation of the Effect of Structural Parameters of Sleeping Bag on the Thermal Protection Performance [Volume 6, Issue 4, 2018, Pages 47-56]
Ghazinoory, Seyed Sepehr New product development pattern in Iran's fashion and apparel industry [Volume 13, Issue 1, 2024, Pages 30-51]
Gheibi, Ali Flexible Fiber Nanogenerator Fabrication by Poly(vinyldene floride) Piezo-polymer [Volume 4, Issue 2, 2014, Pages 35-38]
Gholipour Hamedani, Maziar Garment assembly line balancing using COMSOAL algorithm [Volume 13, Issue 4, 2024, Pages 90-104]
Gholipour-Kanani, Adeleh Fabrication and characterization of polycaprolactone-polyethylene glycol nanofibers containing chamomile extract for wound healing application [Volume 10, Issue 3, 2021, Pages 20-33]
Gholshan Tafti, Hamid Reza Investigation of thermal, mechanical and electrical properties of modified carbon nanotubes reinforced epoxy composites [Volume 8, Issue 1, 2019, Pages 5-11]
Gohari, S. Z. Prediction of Bending Behavior of Woven Fabric Using a Mechanical Model Based on the Theory of Bending of Elastic Cantilever Beam [Volume 3, Issue 3, 2013, Pages 29-38]
Gohari, S. Z. Numerical Simulation of Air Permeability in Plain Woven Fabrics [Volume 3, Issue 3, 2013, Pages 61-68]
Golabzaei, Sabereh The Effect of Nano TiO2 Morphology and Au Nano coating on the cellulose Fabric to Performance of Self-cleaning Properties [Volume 5, Issue 4, 2016, Pages 17-23]
Golabzaei, Sabereh The Effect of TiO2 Nanoparticles Morphology and Au Nanocoating on Cellulosic Fabric in the Performance of Self-cleaning [Volume 6, Issue 1, 2017, Pages 17-23]
Golestani, Amirhosein Fabrication and characterization of chitosan nanofibrous scaffold containing hydroxyapatite/metal-organic framework (HAp@MOF) nanocomposite for bone tissue engineering applications [Volume 13, Issue 2, 2024, Pages 32-45]
Golshadi, Hanieh Kirigami-based wearable sensors: A review of design and performance [Volume 14, Issue 3, 2025, Pages 107-130]
Goudarzi, U. Feasibility Study on Application of a Dye to Impart Camouflage Effect at Near Infrared Region Using UV-Vis Spectrophotometer [Volume 2, Issue 3, 2012, Pages 135-141]
Gouhar pei, Fatemeh Optimization and Prediction of Mechanical Properties of Polypropylene/Poly(butylene
terephthalate) Blend Fibers Using Response Surface Methodology [Volume 2, Issue 2, 2012, Pages 104-113]
H
Habibi, Roham A Review of Sustainability and Development Factors in Iran'sTextile and Clothing Industry [Volume 12, Issue 3, 2023, Pages 93-125]
Habibi, S. Extraction of Chitosan from Shrimp Shell: Characterization of Chitosan and Its Application for Removal of Reactive Blue 13 and Acid Green 3 Dyes from an Aqueous Solution [Volume 3, Issue 3, 2013, Pages 3-10]
Habibi, Sima Study on morphology characterization of gelatin nanofibers [Volume 7, Issue 1, 2018, Pages 5-10]
Habibi, Sima A review on the medical application of electrospun nanofibers [Volume 8, Issue 1, 2019, Pages 31-44]
Habibi, ُSima A Study on nickel and iron removal from wastewater by polyacrylonitrile/thermoplastic polyurethane nanofibers [Volume 13, Issue 4, 2024, Pages 1-11]
Habibi, ُSiman Study on fabrication and the morphology and Rheology of nanosilica/polypropylene nanocomposite fibers [Volume 11, Issue 2, 2022, Pages 18-27]
Habibi, Tiam A Review of Sustainability and Development Factors in Iran'sTextile and Clothing Industry [Volume 12, Issue 3, 2023, Pages 93-125]
Haddad, Reza Preparation of Nanocomposite Membranes Based on Polyacrylonitrile and Nanoclusters {Mo154} For Absorption of Capsaicinoids Usable in Protective Clothing [Volume 8, Issue 3, 2019, Pages 65-71]
Haddadian, Zohre Investigating the effect of peer group on the impulse buying behavior of sportswear consumers [Volume 10, Issue 1, 2021, Pages 33-42]
Hadizadeh, Mohesen Garment Design Based on Similarity Principles and Interactive Genetic Algorithm [Volume 3, Issue 4, 2014, Pages 13-20]
Hadizadeh, Mohsen Applying Self-organizing Neural Network Based on Data Mining to Establish
a Clothing Size Chart [Volume 2, Issue 2, 2012, Pages 97-103]
Hadizadeh, Mohsen Monitoring the Most Critical Error-based Failures in Carpet Production by Failure - Mode - and - Effects Analysis [Volume 2, Issue 4, 2013, Pages 223-227]
Haghighat, Fatemeh Fitting evaluation of women's pants pattern based on body shapes using 3D simulation software [Volume 15, Issue 1, 2026, Pages 20-36]
Haghighat, Nasrin Spinnability and Tensile Properties of Poly(ethylene terephthalate) Fibers Blended with Polymeric Ionic Liquids in Melt Spinning Process [Volume 2, Issue 4, 2013, Pages 229-235]
Haghshenas Jariani, Hanieh Coating cotton fabric with barium-doped bismuth tungstate nanocomposite and hydroxyapatite to improve radiation protection and physical-comfort properties [Volume 14, Issue 4, 2026, Pages 39-56]
Haidary Golfazani, Mohammad Ebrahim Presenting a marketing model for the development of sustainable fashion and clothing industry after the Corona epidemic [Volume 13, Issue 4, 2024, Pages 54-72]
Haji, Aminoddin An introduction to plasma treatment and its applications in surface modification of polypropylene fibers [Volume 4, Issue 4, 2015, Pages 45-54]
Haji, Aminoddin A Review on Surface Modification of Wool Fibers Using Plasma Technology and Its Effect on Dyeing Properties [Volume 5, Issue 3, 2015, Pages 35-43]
Haji, Aminoddin Application of Response Surface Methodology in Optimization of Dyeing of Wool with Citrus Aurantium Leaves as Natural Dye [Volume 8, Issue 3, 2019, Pages 5-13]
Haji Aghajani, Azam Designing a Model of Factors Influencing Technological Entrepreneurship in Knowledge-Based Textile Companies [Volume 15, Issue 1, 2026, Pages 87-117]
Hajiani, Farideh Evaluation of the characteristics of tilapia leather produced in Iran for use in clothing with a sustainable fashion approach [(Articles in Press)]
Hajianzehaei, Zahra Investigating the influential branding variables in women's sport products and presenting a structural model [Volume 11, Issue 4, 2023, Pages 41-55]
Haji Anzhaei, Zahra Present and Test a Model in the Field of Branding Sports Products with a Mixed Approach [Volume 10, Issue 3, 2021, Pages 71-86]
Haji Hashemi, aghil A Review of Sustainability and Development Factors in Iran'sTextile and Clothing Industry [Volume 12, Issue 3, 2023, Pages 93-125]
Hajilari, Mehrdad Investigating the dyeability and adsorption isotherm of jute fibers coated with nano silver and methyl methacrylate with metal complex dye [Volume 12, Issue 1, 2023, Pages 1-16]
Hajizadeh, Peyman Technology Transfer Process in the Leather and Footwear Industry: Integrating Theoretical and Empirical Evidence within a Multi-Grounded Theory Framework [Volume 15, Issue 2, 2026, Pages 82-104]
Hamdi, Karim Identification of Dimensions and Components of Digital Marketing Tools in Startups Active in Iran’s fashion and clothing industry [Volume 12, Issue 4, 2024, Pages 35-61]
Hamed Mosavian, Mohammad Taghi Preparation and Evaluation of Antibacterial Polypropylene Film Using Nano-coatig
Containing Zinc Oxide and Titanium Dioxide Nanoparticles [Volume 2, Issue 2, 2012, Pages 3-7]
Hamzehzadeh, Khatereh Investigating the effect of mordant type, temperature and pH of dyeing bath on the color properties of acrylic yarn dyed with turmeric. [Volume 11, Issue 4, 2023, Pages 15-25]
Hasani, Hasan A Study on Rechargeable Antibacterial Finishing of Spacer Knitted Fabrics
by N-Halamine Compounds [Volume 2, Issue 2, 2012, Pages 71-80]
Hasanzadeh, mahdi The role of metal-organic frameworks in improving the acoustic performance of textiles and lightweight foams: A study on properties, mechanisms, and applications [(Articles in Press)]
Hasanzadeh, Mahdi Fabrication and characterization of chitosan nanofibrous scaffold containing hydroxyapatite/metal-organic framework (HAp@MOF) nanocomposite for bone tissue engineering applications [Volume 13, Issue 2, 2024, Pages 32-45]
Hashemi, M Evaluation of Reactive Dye Adsorption by Chitosan-Treated Cotton Fabrics [Volume 3, Issue 2, 2013, Pages 3-8]
Hashemian, Saeedeh Application of nanoclay particles in improving the functional properties of rice bran plastic composite [Volume 7, Issue 4, 2019, Pages 25-30]
Hashemina, Raheleh Improvement of the Thermal Resistance of Viscose Modified with Poly (amidoamine) Dendrimer [Volume 14, Issue 3, 2025, Pages 13-37]
Hassani, Hossein Investigation into the Energy Absorption Capacity of Reinforced Composite by
3D weft-knitted Fabrics [Volume 2, Issue 2, 2012, Pages 65-70]
Hataminasab, Seyyed Hassan Investigating the effect of peer group on the impulse buying behavior of sportswear consumers [Volume 10, Issue 1, 2021, Pages 33-42]
Hatami Nasab, Seyed Hassan Identifying, categorizing and ranking marketing performance criteria in the fashion and clothing industry using Q methodology [Volume 10, Issue 4, 2021, Pages 23-52]
Hatamvand, Mohammad Monitoring the Most Critical Error-based Failures in Carpet Production by Failure - Mode - and - Effects Analysis [Volume 2, Issue 4, 2013, Pages 223-227]
Hedayati, N. Photo-oxidation of Disperse Dyes Wastewaters with Various Structures by UV/H2O2 Process [Volume 2, Issue 3, 2012, Pages 167-173]
Heidari Golfazani, M.E. A Study on the Effect of Nano Organocalay on Morphology and Dyeability of Polypropylene/ Polyamide 6 Blend Nanocomposite Fibers [Volume 2, Issue 1, 2012, Pages 21-26]
Heidari Golfazani, Mohammad Ebraimm Investigating the effect of mordant type, temperature and pH of dyeing bath on the color properties of acrylic yarn dyed with turmeric. [Volume 11, Issue 4, 2023, Pages 15-25]
Hejazi, S.M. Investigating the Effect of Textile Fibers on Ductility of Bitumen [Volume 1, Issue 1, 2012, Pages 31-34]
Hekmati, Amir Houshang Preparation of Polyurethane (core) and chitosan/poly (ethylene oxide) (shell) composite nanofiber [Volume 7, Issue 2, 2018, Pages 37-46]
Hekmati moghaddam, Seyyed Hossein A Study on Rechargeable Antibacterial Finishing of Spacer Knitted Fabrics
by N-Halamine Compounds [Volume 2, Issue 2, 2012, Pages 71-80]
Helal Bahr, sakineh Investigation on color and antibacterial properties of woolen yarn dyed with fruit of Ailanthus altissima tree [Volume 9, Issue 4, 2020, Pages 25-33]
Hemat abadi, Rsool Evaluation of Hand-woven Carpet Workshops in Kerman Industrial Towns using the SWOT Matrix [Volume 11, Issue 2, 2022, Pages 69-87]
Hemmati Nejad, N. Effect of Enzymatic Hydrolysis on Physical Properties of Wool Fabric [Volume 2, Issue 1, 2012, Pages 3-8]
Hesami, Reza Investigation into the Energy Absorption Capacity of Reinforced Composite by
3D weft-knitted Fabrics [Volume 2, Issue 2, 2012, Pages 65-70]
Heydari Golfzani, Mohammad Ebrahim Business Process Management Risks Using Failure Mode Analysis and Multi-Criteria Decision Making (Case Study of Dyeing, Printing and Finishing Factory of Baloch Industries Development) [Volume 14, Issue 4, 2026, Pages 79-94]
Hivechi, Ahmad Surface Etherification of Cotton Fabric for Enhanced Water Absorption Using Microwave Energy [Volume 5, Issue 2, 2015, Pages 43-49]
Hivechi, Ahmad Demand for nanotech masks with superior protection in the world after Corona [Volume 9, Issue 1, 2020, Pages 39-49]
Hoseinpour Kasgari, Alireza Business Process Management Risks Using Failure Mode Analysis and Multi-Criteria Decision Making (Case Study of Dyeing, Printing and Finishing Factory of Baloch Industries Development) [Volume 14, Issue 4, 2026, Pages 79-94]
Hoseinpour Kasgari, A. R. Effect of Sliver Feeding Position in a Drawing Frame on Radial Distribution of Fibers in Cross-Section of Cotton-Polyester Blended Yarn [Volume 3, Issue 2, 2013, Pages 39-46]
Hosseinbar, Zobeideh Investigation and Extraction of Effective Components in Washing Properties of Anabasis Setifera Plant Extract [Volume 5, Issue 2, 2015, Pages 37-42]
Hosseini, Seyed Abdolkarim Fabricating the Polymeric Micro-Platelets via Electro-Centrifuge Spinning System [Volume 6, Issue 4, 2018, Pages 39-45]
Hosseinian, SeyedAhmad The Effect of Strategic Market Intelligence on the International Marketing Performance of National Brands in the Textile Industry with Respect to the Moderating Role of Competitive Strategies [Volume 14, Issue 2, 2025, Pages 92-108]
I
Iranpoor, Mehdi The application of the response surface methodology for water repellency finishing of polyester and cotton fabric [Volume 7, Issue 1, 2018, Pages 11-22]
Izadian, Hossein Review on Production, Properties, and Applications of Poly(lactic acid) Fibers [Volume 5, Issue 1, 2015, Pages 11-17]
J
Jaberi, fatemeh Challenges, Obstacles and Proposed Solutions to the Textile and Leather Industries in Iran [Volume 4, Issue 2, 2014, Pages 29-33]
Jaberzadeh Ansari, Soraya Optimization of Mixed Production Line in Sportswear Industry [Volume 11, Issue 3, 2022, Pages 52-67]
Jafari, Nazanin Study on melt flow rate behavior of low melt co-polyester using melt flow index evaluation method [Volume 13, Issue 2, 2024, Pages 84-100]
Jafari, Razieh A review on methods of measurement of sensory attributes [Volume 4, Issue 4, 2015, Pages 13-22]
Jafari, Sahar Nano- and microfibrous electrospun scaffolds for vascular regeneration [Volume 5, Issue 4, 2016, Pages 67-77]
Jafari, Sahar Electrospun Nanofibrous Scaffolds for Regeneration of Diseased Vessels [Volume 6, Issue 1, 2017, Pages 67-77]
Jafari, Sanaz Study of Silicon Softener on Some Properties of Corona Discharge Treated Cotton Fabric [Volume 5, Issue 1, 2015, Pages 29-35]
Jafarian, Ali Experimental Development of Tactical Aerostat Patching Scheme [Volume 14, Issue 1, 2025, Pages 67-93]
Jahanbazi,, Zahra Dyeing silk fabric using anthocyanin pigments extracted in different solvents from Hibiscus sabdariffa L [Volume 12, Issue 1, 2023, Pages 27-39]
Jahangard, Ali Akbar Analysis of the Factors Affecting the Environmental Aesthetics Attitude of Clothing Consumer (Case study: Students of Islamic Azad University, Central Tehran Branch) [Volume 15, Issue 1, 2026, Pages 37-59]
Jalalpour, SeyedehSedighe Technology Transfer Process in the Leather and Footwear Industry: Integrating Theoretical and Empirical Evidence within a Multi-Grounded Theory Framework [Volume 15, Issue 2, 2026, Pages 82-104]
Jalalpour, SeyedehSedigheh Bibliometric Analysis of Technology Transfer in Creative Industries: Past, Present, and Future with Interpretive Applications to the Carpet Industry [(Articles in Press)]
Jamadi, Elham Sadat Microwave and UV-Assisted Surface Modification of Polypropylene Fibers [Volume 2, Issue 4, 2013, Pages 217-222]
Jami, Sahar Designing the effect model of social media advertising in domestic clothing industry (Qualitative approach of grounded theory) [Volume 12, Issue 3, 2023, Pages 17-31]
Jamili, Fatemeh Effect of bleaching and natural dyeing on properties of PVC based wood-plastic composite [Volume 7, Issue 4, 2019, Pages 31-37]
Jamshidi, Mostafa Investigation of sound absorption of Warp Knitted Spacer Fabric with nanofiber coating [Volume 10, Issue 2, 2021, Pages 18-25]
Jangi, Abolfazl Experimental Development of Tactical Aerostat Patching Scheme [Volume 14, Issue 1, 2025, Pages 67-93]
K
Kalaee, MohammadReza A review study of the effect of carbon nanofibers on the curing kinetics of epoxy resins [Volume 10, Issue 1, 2021, Pages 51-61]
Kamali Dolatabadi, Mehdi Experimental and numerical investigation of shear modulus of composites reinforced with 3D orthogonal fabric [Volume 12, Issue 1, 2023, Pages 51-64]
Karami, Mohammad Hossein A review study of the effect of carbon nanofibers on the curing kinetics of epoxy resins [Volume 10, Issue 1, 2021, Pages 51-61]
Karimdehnavi, Farzaneh Evaluating the Triboelectric Performance of wearable Textiles in the conversion of Mechanical Energy to Electrical Energy [Volume 9, Issue 3, 2020, Pages 51-57]
Karimi, Iraj Optimization report of automatic cutting machine using SCL programming in non-woven textile production line [Volume 13, Issue 3, 2024, Pages 105-120]
Karimian, Afifeh Evaluating the Triboelectric Performance of wearable Textiles in the conversion of Mechanical Energy to Electrical Energy [Volume 9, Issue 3, 2020, Pages 51-57]
Karimian, Afifeh Fitting evaluation of women's pants pattern based on body shapes using 3D simulation software [Volume 15, Issue 1, 2026, Pages 20-36]
Karimmian, Zohreh Bibliometric Analysis of Technology Transfer in Creative Industries: Past, Present, and Future with Interpretive Applications to the Carpet Industry [(Articles in Press)]
Kazemian, Ahmad The application of the response surface methodology for water repellency finishing of polyester and cotton fabric [Volume 7, Issue 1, 2018, Pages 11-22]
Keshavarz, Zeinab Evaluation of the characteristics of tilapia leather produced in Iran for use in clothing with a sustainable fashion approach [(Articles in Press)]
Keshe Farahani, M. Numerical Simulation of Air Permeability in Plain Woven Fabrics [Volume 3, Issue 3, 2013, Pages 61-68]
Kesheh farahani, Masood Investigating the cultural factors affecting the consumer's awareness of the quality of the clothing brand (Study case: Sari city) [Volume 13, Issue 2, 2024, Pages 16-32]
Khajavi, R. Fabrication of Core-Shell Polyamide/Silver Nanofibers Composites [Volume 3, Issue 1, 2013, Pages 17-22]
Khajavi, Ramin Starch Fibers Production by Wet Spinning in Rotational Coagulation Bath [Volume 2, Issue 4, 2013, Pages 201-207]
Khajavi, Ramin Measurements of Specific Surface Area of Materials Specially Fibers: A Review [Volume 5, Issue 2, 2015, Pages 3-10]
Khajavi, Ramin The Effect of Nano TiO2 Morphology and Au Nano coating on the cellulose Fabric to Performance of Self-cleaning Properties [Volume 5, Issue 4, 2016, Pages 17-23]
Khajavi, Ramin The Effect of TiO2 Nanoparticles Morphology and Au Nanocoating on Cellulosic Fabric in the Performance of Self-cleaning [Volume 6, Issue 1, 2017, Pages 17-23]
Khajavi, Ramin A review study of the effect of carbon nanofibers on the curing kinetics of epoxy resins [Volume 10, Issue 1, 2021, Pages 51-61]
Khajavi, Ramin Comparative Study of one- and two-factors Reactive Dye Adsorption Isotherms on Cellulose Fabric using Urea, Dispersing and Penetrating auxiliary Material [Volume 10, Issue 3, 2021, Pages 1-19]
Khajavi, Ramin Application of smart materials for textile: a review [Volume 12, Issue 4, 2024, Pages 107-135]
Khajavi, Ramin Effect of the Preparation Process on the Properties of Bacterial Cellulose/Polyethylene Glycol Nanocomposites as Bio-based Synthetic Leather [(Articles in Press)]
Khajeh, Ehsan Optimization of the electroless nickel plating process on nonwoven textiles for electromagnetic waves shielding [Volume 14, Issue 4, 2026, Pages 57-78]
Khaje Mehrizi, Mohammad Photo-oxidation of Disperse Dyes Wastewaters with Various Structures by UV/H2O2 Process [Volume 2, Issue 3, 2012, Pages 167-173]
Khaleghi, Samaneh Evaluation of dyeing process and colorfastness of wool fibers dyed with Centaurea behen L. [Volume 13, Issue 4, 2024, Pages 12-31]
Khalilipourroodi, Khalilorrahman The effect of consumer's attitude toward environment on environmentally friendly behavior and green apparel purchasing [Volume 4, Issue 3, 2014, Pages 39-48]
Khalilipourroodi, Khalilorrahman Review of extraction methods of Keratin from fibers and its applications as medical textiles [Volume 9, Issue 1, 2020, Pages 5-19]
Khalili Samani, Kimiya Eco-Friendly Dyeing of Cotton Fabric with Anthocyanins Extracted from Red Cabbage: Optimization of the Extraction Process and Comparative Evaluation of Natural and Metallic Mordants [Volume 14, Issue 4, 2026, Pages 1-17]
Khalili Samani, Kimiya Eco-Friendly Dyeing of Cotton Fabric with Anthocyanins Extracted from Red Cabbage: Optimization of the Extraction Process and Comparative Evaluation of Natural and Metallic Mordants [(Articles in Press)]
Khashei, Mehdi Proposing a soft hybrid computing model to improve the prediction of the quality
of seams in garments [Volume 7, Issue 3, 2018, Pages 71-80]
Khavas, Mahsa A morphology study of PA 6 electrospun nanofibers using single and double side nozzles jet [Volume 6, Issue 2, 2017, Pages 51-43]
Khedmatbin Dana, Shabnam Performance Modelling of Fiber-based Perovskite Solar Cells [Volume 14, Issue 1, 2025, Pages 16-45]
Kheirabadi, H. Invetigation of Effect of Production System on Productivityof Shirt Classic-Line Production [Volume 1, Issue 1, 2012, Pages 19-24]
Khoddami, A. A Review on Superhydrophobicity: A Characteristic Property of Textiles [Volume 3, Issue 2, 2013, Pages 23-38]
Khoddami, Akbar Microwave and UV-Assisted Surface Modification of Polypropylene Fibers [Volume 2, Issue 4, 2013, Pages 217-222]
Khoddami, Akbar Review on Production, Properties, and Applications of Poly(lactic acid) Fibers [Volume 5, Issue 1, 2015, Pages 11-17]
Khoddami, Akbar An investigatoin into the different finishing methods of the bedding textiles with a relaxing natural extract of the Jasmine flower. [Volume 6, Issue 2, 2017, Pages 27-36]
Khoddami, Akbar a new method to improve dyeing properties of cotton substrate by the introduction of urea hydrochloride / ethylene diamine deep eutectic solvent as an intra crystalline swelling agent [Volume 10, Issue 2, 2021, Pages 1-17]
Khoshtinat, Behnaz The Effect of Strategic Market Intelligence on the International Marketing Performance of National Brands in the Textile Industry with Respect to the Moderating Role of Competitive Strategies [Volume 14, Issue 2, 2025, Pages 92-108]
Khoshtinat, Behnaz Factors affecting customer-oriented behavior in the organic clothing industry [Volume 15, Issue 2, 2026, Pages 42-57]
Kiakojouri, Davood Hierarchical Structuring of Organizational Innovative Culture Dimensions Based on Transformational Leadership Style in Iranian Fashion Design and Dressmaking Schools Using Interpretive Structural Modeling (ISM) Method [Volume 14, Issue 3, 2025, Pages 69-89]
Kianersi, Sogol Review of extraction methods of Keratin from fibers and its applications as medical textiles [Volume 9, Issue 1, 2020, Pages 5-19]
Kiani rad ‎, Mehran Synthesis of silk fibroin-kitosan nanofibers as tissue engineering scaffold for articular cartilage [Volume 8, Issue 4, 2020, Pages 69-77]
Konjkav monfared, Amirreza Investigating the effect of peer group on the impulse buying behavior of sportswear consumers [Volume 10, Issue 1, 2021, Pages 33-42]
Konjkav monfared, Amirreza The effect of consumer arrogance on clothing style confidence in apparel industry [Volume 11, Issue 1, 2022, Pages 65-78]
Koshki, Mona Identification of Dimensions and Components of Digital Marketing Tools in Startups Active in Iran’s fashion and clothing industry [Volume 12, Issue 4, 2024, Pages 35-61]
Kourki, Hajir Review on electrospinning and microstructure control of non-woven mat and its applications [Volume 7, Issue 1, 2018, Pages 47-61]
Latifi, Masoud Investigation of Seam Behavior against Tensile Loads [Volume 7, Issue 1, 2018, Pages 29-38]
Latifi, Masoud Introduction of protective gloves and their performance evaluation methods [Volume 7, Issue 3, 2018, Pages 19-28]
Latifi, Masoud EFFECT OF SEAM TYPE AND PARAMETERS ON FABRIC BENDING LENGTH [Volume 8, Issue 1, 2019, Pages 13-20]
Lolaki, Asal Textiles with Negative Poisson's Ratio [Volume 5, Issue 3, 2015, Pages 19-27]
M
Mahdavi, Dina Assessment of the Value Chain Development of PET Chips and Polyester Fibers [Volume 14, Issue 3, 2025, Pages 38-68]
Mahdikhani, Mehri Clustering and mapping of scientific studies on marketing in the textile and clothing industry based on articles indexed in the WoS database [Volume 10, Issue 3, 2021, Pages 49-70]
Mahmoodi, N. M. Basic Dyes Removal from Aqueous Media by Nickel-Zinc Ferrite Magnetic Nanoparticles [Volume 3, Issue 1, 2013, Pages 29-36]
Mahmoodi Pandar, Mohammad salehi The effect of consumer arrogance on clothing style confidence in apparel industry [Volume 11, Issue 1, 2022, Pages 65-78]
Mahmoudi, Abolfazl A morphology study of PA 6 electrospun nanofibers using single and double side nozzles jet [Volume 6, Issue 2, 2017, Pages 51-43]
Mahnia, Aliyeh Evaluation of dyeing process and colorfastness of wool fibers dyed with Centaurea behen L. [Volume 13, Issue 4, 2024, Pages 12-31]
Makooyie, Fatemeh Applying Self-organizing Neural Network Based on Data Mining to Establish
a Clothing Size Chart [Volume 2, Issue 2, 2012, Pages 97-103]
Maktoobi, Shadi Dyeing of nylon fabrics with natural sumac dye using recycled feather keratin [Volume 11, Issue 1, 2022, Pages 1-10]
Maleki, Homa Evaluation of dyeing process and colorfastness of wool fibers dyed with Centaurea behen L. [Volume 13, Issue 4, 2024, Pages 12-31]
Maleki, Homa Investigation and feasibility of using bamboo yarn in the ground layer of handmade carpets with emphasis on physico-mechanical properties [Volume 14, Issue 2, 2025, Pages 19-42]
Maleki, Mohammad Hasan Identifying and Prioritizing the Most Important Factors Affecting the Willingness of Domestic Consumers to Buy Foreign Clothes- Case Study in Qom Province [Volume 11, Issue 1, 2022, Pages 28-46]
Maleki, Najme The effect of plant and metallic mordants on the colorimetric and fastness properties of wool yarns dyed with cochineal natural colorant [Volume 14, Issue 1, 2025, Pages 114-133]
Maleki Minbash Razgah, Morteza Conceptualization of the Employees Brand –building Behavior in the Clothing Industry [Volume 14, Issue 2, 2025, Pages 109-133]
Maleknia, L. Fabrication of Core-Shell Polyamide/Silver Nanofibers Composites [Volume 3, Issue 1, 2013, Pages 17-22]
Maleknia, Laleh Preparation of Polyurethane (core) and chitosan/poly (ethylene oxide) (shell) composite nanofiber [Volume 7, Issue 2, 2018, Pages 37-46]
Manochheri, Lila A comparative study of surrealism style in the works of Salvador Dali and Iran Droudy and its application in conceptual clothing design [Volume 11, Issue 4, 2023, Pages 56-76]
Mardiha, Ali Effect of air jet spinning machine parameters on the characteristics of viscose yarns [(Articles in Press)]
Mashroteh, Hasan A Review on the Properties and Structures of Surgical Gowns [Volume 6, Issue 4, 2018, Pages 5-14]
Mashroteh, Hasan Investigation of the Parameters Affecting on the long-Term Creep Behavior of the Woven and Nonwoven Geotextile Polyester Fabrics [Volume 7, Issue 3, 2018, Pages 59-70]
Matin-Moghadam, Azadeh Optimization of Madder and Walnut hull Biodegradable Compounds to Mothproofing of Wool Fabrics against A. verbasci using Pad-batch Method [Volume 8, Issue 4, 2020, Pages 59-68]
Mazaheri, F.M. Comparative Study between Microwave Assisted and Thermally Synthesized TEA based Esterquat Softeners Used as Textile Softening Agents [Volume 3, Issue 1, 2013, Pages 37-45]
Mazdak, Zeinab Extracting and Clustering Stone-Wash Design in Jeans Images Using K-means Algorithm [Volume 2, Issue 4, 2013, Pages 209-215]
Mazloomi, Karim Technology Transfer Process in the Leather and Footwear Industry: Integrating Theoretical and Empirical Evidence within a Multi-Grounded Theory Framework [Volume 15, Issue 2, 2026, Pages 82-104]
Mazrouei-Sebdani, Z. A Review on Superhydrophobicity: A Characteristic Property of Textiles [Volume 3, Issue 2, 2013, Pages 23-38]
Mazrouei-Sebdani, Zahra An investigatoin into the different finishing methods of the bedding textiles with a relaxing natural extract of the Jasmine flower. [Volume 6, Issue 2, 2017, Pages 27-36]
M Brown, Thomas Perovskite Textile Solar Cells Containing Cu2ZnSnS4 [Volume 13, Issue 2, 2024, Pages 46-63]
Meftahi, Amin Investigating The Properties of Bacterial Nanocellulosecoated Cotton Spunlace for Foot Moisture Management [Volume 14, Issue 3, 2025, Pages 1-12]
Meftahi, Amin Effect of the Preparation Process on the Properties of Bacterial Cellulose/Polyethylene Glycol Nanocomposites as Bio-based Synthetic Leather [(Articles in Press)]
Mehrabi, Ahmad Economic study of polyester Texturized Interlace ( ITY) thread production instead of importing it [Volume 12, Issue 2, 2023, Pages 63-75]
Mehrdad shokriye, Mahmood Analytical Investigation on the Tensile Behavior of Hybrid Plain-woven Fabrics [Volume 2, Issue 2, 2012, Pages 115-122]
Merati, Ali Akbar Design of Optical Fiber Display in Weft Knitting [Volume 6, Issue 3, 2017, Pages 31-36]
Milad, Salehi Investigating the dyeability and adsorption isotherm of jute fibers coated with nano silver and methyl methacrylate with metal complex dye [Volume 12, Issue 1, 2023, Pages 1-16]
Mirabi, Ali Synthesis of SBA-15/ZIF-8 nanocomposite for removal of reactive red 198 from textile waste water [Volume 10, Issue 1, 2021, Pages 25-32]
Mirbaha, Hamideh Stimuli Responsive Hydrogels and Polyacrylonitrile Gel Fibers [Volume 2, Issue 2, 2012, Pages 81-96]
Mirjalili, Farzaneh Applying Self-organizing Neural Network Based on Data Mining to Establish
a Clothing Size Chart [Volume 2, Issue 2, 2012, Pages 97-103]
Mirjalili, Marjan Present and Test a Model in the Field of Branding Sports Products with a Mixed Approach [Volume 10, Issue 3, 2021, Pages 71-86]
Mirjalili, Marjan Investigating the influential branding variables in women's sport products and presenting a structural model [Volume 11, Issue 4, 2023, Pages 41-55]
Mirjalili, Mohammad Effect of bleaching and natural dyeing on properties of PVC based wood-plastic composite [Volume 7, Issue 4, 2019, Pages 31-37]
Mirjalili, Mohammad Investigation of thermal, mechanical and electrical properties of modified carbon nanotubes reinforced epoxy composites [Volume 8, Issue 1, 2019, Pages 5-11]
Mirjalili, Mohammad Application of Response Surface Methodology and FEM in Optimization Fabric Bagging Deformation in Stenter Machine [Volume 9, Issue 1, 2020, Pages 71-90]
Mirjalili, Mohammad Optimization of Dyeing Properties of Polyester / Viscose Fabric Using Corona and Alkaline Pre-Treatment by Central Composite Design (CCD) Method [Volume 9, Issue 2, 2020, Pages 49-59]
Mirjalili, Mohammad Improving the Electrical and Anti-bacterial Properties of Cotton Fabric Using Graphene Oxide [Volume 10, Issue 1, 2021, Pages 15-23]
Mirjalili, Seyed Abbas Influence of the Backrest Roll Position on the Physical and Mechanical Properties of the Produced Fabric [Volume 6, Issue 4, 2018, Pages 57-63]
Mirjalili, Seyyed Abbas Monitoring the Most Critical Error-based Failures in Carpet Production by Failure - Mode - and - Effects Analysis [Volume 2, Issue 4, 2013, Pages 223-227]
Mivehi, Leila Performance Modelling of Fiber-based Perovskite Solar Cells [Volume 14, Issue 1, 2025, Pages 16-45]
Modarresi, V. Evaluation of Fabric Mechanical Properties on Worsted Fabric Moulding [Volume 2, Issue 1, 2012, Pages 9-14]
Moghassem, Abdolrasol Evaluating the Interactive Effect of Temperature and Alkali Concentration on Dye Absorption of Mercerized Cotton Plain Knitted Fabric [Volume 4, Issue 1, 2014, Pages 27-34]
Moghassem, Abdolrasol Minimizing fabric waste in the pattern drawing stage based on the creativity of the pattern maker [Volume 10, Issue 2, 2021, Pages 49-63]
Moghassem, Abdolrasol Decoratinge women's Ball Gowns using Intelligent Optical System [Volume 9, Issue 4, 2020, Pages 43-51]
Moghassem, Abdolrasol Analysing factors affecting the choice of unconventional clothing by youth [Case study: Tehran, District No. Two] [Volume 10, Issue 3, 2021, Pages 87-102]
Moghassem, A. R. Effect of Sliver Feeding Position in a Drawing Frame on Radial Distribution of Fibers in Cross-Section of Cotton-Polyester Blended Yarn [Volume 3, Issue 2, 2013, Pages 39-46]
Moghassem, A. R. Prediction of Bending Behavior of Woven Fabric Using a Mechanical Model Based on the Theory of Bending of Elastic Cantilever Beam [Volume 3, Issue 3, 2013, Pages 29-38]
Moghassem, A. R. Numerical Simulation of Air Permeability in Plain Woven Fabrics [Volume 3, Issue 3, 2013, Pages 61-68]
Mohaddes Mojtahedi, Mohammad Reza Tensile Properties-Microstructure Correlations in the Hot-Drawn Nylon 6 Fiber [Volume 5, Issue 2, 2015, Pages 11-20]
Mohamadiyan, Mahsa Fabrication of ZnTiO₃/Cellulose Nanocomposite Nanofibers Derived from Pine Cone Waste via Electrospinning [(Articles in Press)]
Mohammad Ali Malek, Reza Improvement of the Thermal Resistance of Viscose Modified with Poly (amidoamine) Dendrimer [Volume 14, Issue 3, 2025, Pages 13-37]
Mohammadi, Anis Different factors of university manteau and their way of influencing people’s choices [Volume 7, Issue 1, 2018, Pages 39-46]
Mohammadi, Hamed Identifying the influential factors on the competitiveness ability of textile industry clusters [Volume 5, Issue 4, 2016, Pages 31-41]
Mohammadi, Hamed Influential Factors on the Competitiveness of Textile Industry Clusters [Volume 6, Issue 1, 2017, Pages 31-41]
Mohammadi, Hamed Investigating the Factors Affecting the Selection of Managers in the Textile Industry(Case Study: Textile Factory Managers of Mazandaran Province) [Volume 7, Issue 4, 2019, Pages 17-24]
Mohammadi, Hamed Identify the factors affecting the fashion and clothing industry with Environmental sustainability approach [Volume 9, Issue 1, 2020, Pages 21-29]
Mohammadi, Vahid Identifying the influential factors on the competitiveness ability of textile industry clusters [Volume 5, Issue 4, 2016, Pages 31-41]
Mohammadi, Vahid Influential Factors on the Competitiveness of Textile Industry Clusters [Volume 6, Issue 1, 2017, Pages 31-41]
Mohammad Yousefi Vardengani, Fatemeh Identification and ranking of the components of sustainable development of the garment industry of Shahrekord [Volume 12, Issue 3, 2023, Pages 55-73]
Mokhtari, J. Phase Change Materials and Their Application in Textiles [Volume 1, Issue 1, 2012, Pages 10-18]
Mokhtari, Javad Feasibility Study on Application of a Dye to Impart Camouflage Effect at Near Infrared Region Using UV-Vis Spectrophotometer [Volume 2, Issue 3, 2012, Pages 135-141]
Mollahosseini, hossain The effect of washing cycles on the efficiency of fabric masks treated with hydroxyapatite [Volume 11, Issue 3, 2022, Pages 41-51]
Montazeri, Zohre Design of Military Camouflage Patterns Using Image Processing and Interactive Genetic Algorithm [Volume 8, Issue 1, 2019, Pages 45-57]
Moosavi Shooshtari, Ahmad Optimization and Prediction of Mechanical Properties of Polypropylene/Poly(butylene
terephthalate) Blend Fibers Using Response Surface Methodology [Volume 2, Issue 2, 2012, Pages 104-113]
Morad Hosseini, Maryam Identify the factors affecting the fashion and clothing industry with Environmental sustainability approach [Volume 9, Issue 1, 2020, Pages 21-29]
Moradi, Farzaneh A Review on the Properties and Structures of Surgical Gowns [Volume 6, Issue 4, 2018, Pages 5-14]
Moradi, Hamidreza Fabrication of magnetic carbon fibers with three-dimensional structure from Luffa sponge for the separation of oily pollutants from water [Volume 15, Issue 2, 2026, Pages 1-19]
Moradi, Omid A review study of the effect of carbon nanofibers on the curing kinetics of epoxy resins [Volume 10, Issue 1, 2021, Pages 51-61]
Moradian, Majid Synthesis of SBA-15/ZIF-8 nanocomposite for removal of reactive red 198 from textile waste water [Volume 10, Issue 1, 2021, Pages 25-32]
Morshed, Mohammad A Study on Rechargeable Antibacterial Finishing of Spacer Knitted Fabrics
by N-Halamine Compounds [Volume 2, Issue 2, 2012, Pages 71-80]
Morteza, Vadood A Review for Application of machine vision in carpet Industry [Volume 7, Issue 3, 2018, Pages 39-58]
Mosavi, Nairsadat Analysing factors affecting the choice of unconventional clothing by youth [Case study: Tehran, District No. Two] [Volume 10, Issue 3, 2021, Pages 87-102]
Mostahfezian, Alireza Investigation of the effect of fabric physical parameters on its objective and subjective drape [Volume 12, Issue 2, 2023, Pages 1-13]
Mottaghitalab, V. Development and Characterization of Hollow Nanofibers: A Review [Volume 3, Issue 3, 2013, Pages 39-60]
Mottaghitalab, Vahid Perovskite Textile Solar Cells Containing Cu2ZnSnS4 [Volume 13, Issue 2, 2024, Pages 46-63]
Mottaghitalab, Vahid Performance Modelling of Fiber-based Perovskite Solar Cells [Volume 14, Issue 1, 2025, Pages 16-45]
Moulavi, Bahare Study on the Effect of Trade-Washing on the Color Quality of Silk Yarn [Volume 9, Issue 3, 2020, Pages 17-28]
Mousavi, Fatemeh Sadat Fabrication of magnetic carbon fibers with three-dimensional structure from Luffa sponge for the separation of oily pollutants from water [Volume 15, Issue 2, 2026, Pages 1-19]
Mousavi Shoushtari, Ahmad An introduction to plasma treatment and its applications in surface modification of polypropylene fibers [Volume 4, Issue 4, 2015, Pages 45-54]
Mousazadegan, Fatemeh Experimental Investigation of the Effect of Structural Parameters of Sleeping Bag on the Thermal Protection Performance [Volume 6, Issue 4, 2018, Pages 47-56]
Mousazadegan, Fatemeh Investigation of Seam Behavior against Tensile Loads [Volume 7, Issue 1, 2018, Pages 29-38]
Mousazadegan, Fatemeh Introduction of protective gloves and their performance evaluation methods [Volume 7, Issue 3, 2018, Pages 19-28]
Mousazadegan, fetemeh EFFECT OF SEAM TYPE AND PARAMETERS ON FABRIC BENDING LENGTH [Volume 8, Issue 1, 2019, Pages 13-20]
Moussavi Neghabi, Seyed Mojtaba Redesigning Industrial Development Policies in Iran’s Apparel Sector Based on Value Chain Analysis [(Articles in Press)]
Mozafary Shamsi, Vajiha Fabric Simulation Using Mass-Spring Model (Review) [Volume 5, Issue 4, 2016, Pages 43-66]
Mozafary Shamsi, Vajiha Fabric Simulation Using Mass-Spring Model (Review) [Volume 6, Issue 1, 2017, Pages 43-66]
N
Naime, Neda Investigation of Seam Behavior against Tensile Loads [Volume 7, Issue 1, 2018, Pages 29-38]
Najaf Abadi, Sahar Measurements of Specific Surface Area of Materials Specially Fibers: A Review [Volume 5, Issue 2, 2015, Pages 3-10]
Najafi, Farhood Spinnability and Tensile Properties of Poly(ethylene terephthalate) Fibers Blended with Polymeric Ionic Liquids in Melt Spinning Process [Volume 2, Issue 4, 2013, Pages 229-235]
Najafi, H. Photo-oxidation of Disperse Dyes Wastewaters with Various Structures by UV/H2O2 Process [Volume 2, Issue 3, 2012, Pages 167-173]
Namiranian, B. Evaluation of Fabric Mechanical Properties on Worsted Fabric Moulding [Volume 2, Issue 1, 2012, Pages 9-14]
Namiranian, Rostam An Overview of Textile Bagging Behavior Based on Fabric Structural Parameters [Volume 5, Issue 3, 2015, Pages 9-17]
Namiranian, Rostam Introducing a method for measuring the hand dimensions to prepare the glove using depth camera [Volume 8, Issue 4, 2020, Pages 5-13]
Namiranian, Rostam The effect of washing cycles on the efficiency of fabric masks treated with hydroxyapatite [Volume 11, Issue 3, 2022, Pages 41-51]
Nasimi, Mohammad Ali Providing a scale of customer delight in textiles and clothing with a qualitative and quantitative approach [Volume 12, Issue 4, 2024, Pages 84-106]
Nasiri, M. Study on Properties and Applications of Esterquats Based on Tallow Fatty Acid and Palm Stearin Methyl Ester [Volume 1, Issue 1, 2012, Pages 5-9]
Nasouri, Komeil Optimization of the electroless nickel plating process on nonwoven textiles for electromagnetic waves shielding [Volume 14, Issue 4, 2026, Pages 57-78]
Nasouri, Komeil Fabrication of magnetic carbon fibers with three-dimensional structure from Luffa sponge for the separation of oily pollutants from water [Volume 15, Issue 2, 2026, Pages 1-19]
Nasouri, Komeil A review on aramid nanofibers: Manufacturing, properties, applications, and environmental challenges [(Articles in Press)]
Nateghi, Mohammad Reza Application of nanoclay particles in improving the functional properties of rice bran plastic composite [Volume 7, Issue 4, 2019, Pages 25-30]
Navayee, Taraneh Investigating the effect of acid and metal mordant types on the colorimetric and fastness properties of woolen yarn dyed with cinnamon bark as a natural dye [Volume 13, Issue 1, 2024, Pages 1-14]
Nayebzadeh, Shahnaz Identifying, categorizing and ranking marketing performance criteria in the fashion and clothing industry using Q methodology [Volume 10, Issue 4, 2021, Pages 23-52]
Nayebzadeh, Shahnaz Identification and analysis of drivers affecting the future of digital branding in Iran's carpet industry [Volume 11, Issue 3, 2022, Pages 92-115]
Nayebzadeh, Shahnaz Circular economy and fashion industry: Drawing a scientific map of international research in the reference database Web of Science [Volume 12, Issue 3, 2023, Pages 32-54]
Nayebzadeh, Shahnaz Identification of Dimensions and Components of Digital Marketing Tools in Startups Active in Iran’s fashion and clothing industry [Volume 12, Issue 4, 2024, Pages 35-61]
Nayebzadeh, Shahnaz Identifying Marketing Performance Metrics in the Fashion and Clothing Industry Using Content Analysis [Volume 12, Issue 4, 2024, Pages 62-83]
Nazari, Ali Optimization of Madder and Walnut hull Biodegradable Compounds to Mothproofing of Wool Fabrics against A. verbasci using Pad-batch Method [Volume 8, Issue 4, 2020, Pages 59-68]
Nazari, Ali Structural Equations Analysis and Design of Polyimide 6,6 Fabrics Multifunctional Properties Finished with Silver Nanoparticles and Butane tetra carboxylic acid using Mediatory Property of Hydrophilicity [Volume 9, Issue 2, 2020, Pages 5-19]
Nazari, Ali Optimization of Dyeing Properties of Polyester / Viscose Fabric Using Corona and Alkaline Pre-Treatment by Central Composite Design (CCD) Method [Volume 9, Issue 2, 2020, Pages 49-59]
Nazari, Ali Fabrication of ZnTiO₃/Cellulose Nanocomposite Nanofibers Derived from Pine Cone Waste via Electrospinning [(Articles in Press)]
Nazari, Shaghayegh Design of modular clothing using 3D printing technology with the approach to sustainability in fashion [Volume 13, Issue 3, 2024, Pages 83-104]
Nikfar, Tayebeh Given the relationship between innovation performance on financial performance variables intermediary market performance and yield [Volume 6, Issue 2, 2017, Pages 37-42]
Nikkar, Hamideh Comparison of Various Advanced Oxidation Processes Based on Ozonation and UV Irradiation for Treatment of Wastewater-Containing Reactive Dyes [Volume 4, Issue 1, 2014, Pages 35-42]
Noori, M. Phase Change Materials and Their Application in Textiles [Volume 1, Issue 1, 2012, Pages 10-18]
Noorpanah, Parviz Stimuli Responsive Hydrogels and Polyacrylonitrile Gel Fibers [Volume 2, Issue 2, 2012, Pages 81-96]
Nori, Mehdi Feasibility Study on Application of a Dye to Impart Camouflage Effect at Near Infrared Region Using UV-Vis Spectrophotometer [Volume 2, Issue 3, 2012, Pages 135-141]
Norouzi, Hossein Examining the Consumer Behavior Path in Men’s Luxury Brands: From Purchase Intention to Brand Advocacy (Case Study: Consumers of Hugo Boss and Giorgio Armani) [(Articles in Press)]
Norouzi, Mahnaz The Effect of Strategic Market Intelligence on the International Marketing Performance of National Brands in the Textile Industry with Respect to the Moderating Role of Competitive Strategies [Volume 14, Issue 2, 2025, Pages 92-108]
Norouzi, Mahnaz Factors affecting customer-oriented behavior in the organic clothing industry [Volume 15, Issue 2, 2026, Pages 42-57]
Nosrati, Hooshang Analytical Investigation on the Tensile Behavior of Hybrid Plain-woven Fabrics [Volume 2, Issue 2, 2012, Pages 115-122]
Nosraty, H. A Study on the Effect of Basalt and Nylon Yarns Hybridization on the Tensile Properties of Their Weaved Fabrics [Volume 2, Issue 1, 2012, Pages 39-44]
Nosraty, Hooshang Modeling of the effect of weft yarn properties and air-jet loom speed on the weft yarn arrival time and its tension [Volume 5, Issue 1, 2015, Pages 3-10]
Nourbakhsh, Shirin Study of Silicon Softener on Some Properties of Corona Discharge Treated Cotton Fabric [Volume 5, Issue 1, 2015, Pages 29-35]
Nourbakhsh, Shirin Study on the Properties of Bacterial Cellulose Containing Dendrimers, Plant and Chemical Materials [Volume 10, Issue 4, 2021, Pages 109-126]
Nouri, Sara Dyeing of wool yarns with clove and investigation of antibacterial and ultraviolet protection properties [Volume 11, Issue 4, 2023, Pages 1-14]
Nouri tabar, saeide Characteristics and contexts affecting the evolution of Iranian clothing from European clothing in the second Qajar period [Volume 10, Issue 4, 2021, Pages 53-70]
O
Owlia, Emad Evaluation of strain and deformation of the surface of woven fabrics using image correlation method [Volume 11, Issue 4, 2023, Pages 26-40]
P
Parvaresh Mohseny, marjan Identification and analysis of drivers affecting the future of digital branding in Iran's carpet industry [Volume 11, Issue 3, 2022, Pages 92-115]
Parvesh Baladi, Azadeh Study of the technology of a sample of Golabtun-embroidered velvet fabric of the Qajar period [Volume 13, Issue 4, 2024, Pages 32-53]
Parvinzadeh, Maziyar Study of Silicon Softener on Some Properties of Corona Discharge Treated Cotton Fabric [Volume 5, Issue 1, 2015, Pages 29-35]
Payvandy, P. Garment Images Clustering Based on Image Processing Techniques and K-Means Algorithm [Volume 3, Issue 1, 2013, Pages 3-10]
Payvandy, P. Factorial Analysis and K-Means Clustering Methods for Extraction of Human Body Size Parameters and Shape Groupings [Volume 3, Issue 3, 2013, Pages 11-16]
Payvandy, P. Image Processing for Optimization of Thresholding Methods and Determination of Nanofibers Diameter [Volume 3, Issue 3, 2013, Pages 17-28]
Payvandy, pedram Garment Design Based on Similarity Principles and Interactive Genetic Algorithm [Volume 3, Issue 4, 2014, Pages 13-20]
Payvandy, Pedram Extracting and Clustering Stone-Wash Design in Jeans Images Using K-means Algorithm [Volume 2, Issue 4, 2013, Pages 209-215]
Payvandy, Pedram An Overview for Marker Making Methods Using Heuristic and Metaheuristic Algorithms [Volume 4, Issue 2, 2014, Pages 17-28]
Payvandy, Pedram Simulation of the Fabric Drape Behavior Using the Mass-Spring Model [Volume 4, Issue 4, 2015, Pages 3-11]
Payvandy, Pedram A Review of Methods for Measuring Yarn Properties Using Image Processing [Volume 4, Issue 4, 2015, Pages 31-44]
Payvandy, Pedram An Overview of Textile Bagging Behavior Based on Fabric Structural Parameters [Volume 5, Issue 3, 2015, Pages 9-17]
Payvandy, Pedram 3D Garment Design Using Interactive Genetic Algoritm And k-means Clustering [Volume 5, Issue 4, 2016, Pages 3-15]
Payvandy, Pedram Fabric Simulation Using Mass-Spring Model (Review) [Volume 5, Issue 4, 2016, Pages 43-66]
Payvandy, Pedram 3D Garment Design Using Interactive Genetic Algorithm and k-Means Clustering [Volume 6, Issue 1, 2017, Pages 3-15]
Payvandy, Pedram Fabric Simulation Using Mass-Spring Model (Review) [Volume 6, Issue 1, 2017, Pages 43-66]
Payvandy, Pedram A Review for Camouflage Pattern Designing, Evaluating and Breaking Methods [Volume 6, Issue 3, 2017, Pages 9-21]
Payvandy, Pedram A Review for Application of machine vision in carpet Industry [Volume 7, Issue 3, 2018, Pages 39-58]
Payvandy, Pedram A Review for Application of machine vision in Apparel industry [Volume 7, Issue 4, 2019, Pages 39-50]
Payvandy, Pedram Design of Military Camouflage Patterns Using Image Processing and Interactive Genetic Algorithm [Volume 8, Issue 1, 2019, Pages 45-57]
Payvandy, Pedram Investigating and modeling the effect of magnetic field shape on electrospinning process [Volume 8, Issue 2, 2019, Pages 37-47]
Payvandy, Pedram Review of Heat Transfer in Textiles, Part 1: Experimental Studies [Volume 8, Issue 3, 2019, Pages 33-45]
Payvandy, Pedram Heat Transfer in Textiles, Part 2: Review of Modeling Studies [Volume 8, Issue 3, 2019, Pages 51-63]
Payvandy, Pedram Introducing a method for measuring the hand dimensions to prepare the glove using depth camera [Volume 8, Issue 4, 2020, Pages 5-13]
Peivandi, P. Derivation of Fabric Parameters from Simulated Imaging by Genetic Algorithm Method [Volume 3, Issue 2, 2013, Pages 47-56]
Peivandi, Pedram Applying Self-organizing Neural Network Based on Data Mining to Establish
a Clothing Size Chart [Volume 2, Issue 2, 2012, Pages 97-103]
Peyvandi, Pedram Melt Spinning of Photoluminescent Polypropylene Fibers Using Phosphorescent Pigments [Volume 5, Issue 3, 2015, Pages 29-33]
Pourariyan, Sepehr Starch Fibers Production by Wet Spinning in Rotational Coagulation Bath [Volume 2, Issue 4, 2013, Pages 201-207]
Pour Kazemian, Hajar Factors Influencing the Purchase of Clothing [Volume 5, Issue 1, 2015, Pages 37-42]
Q
Qalehban Bakhshayesh, Ali Assessment of the Value Chain Development of PET Chips and Polyester Fibers [Volume 14, Issue 3, 2025, Pages 38-68]
Qasemi, Sepehr Identifying of technical characteristics of carpet weaving and dyeing in Malayer and Nahavand cities [(Articles in Press)]
R
Radfar, Reza New product development pattern in Iran's fashion and apparel industry [Volume 13, Issue 1, 2024, Pages 30-51]
Radfar, Zeynab Application of Natural and Synthetic Tanning agent and Cationic Compounds for Improvement of Wash Fastness of dyed Silk, Wool and Nylon with Acid Dyes [Volume 6, Issue 2, 2017, Pages 13-18]
Raesi, Hashem Investigating the effect of peer group on the impulse buying behavior of sportswear consumers [Volume 10, Issue 1, 2021, Pages 33-42]
Rafiei, Azar Receiving the Taste of the Chaleshtor Lozenge Rug Audience Based on an Artificial Neural Networks(ANN) [Volume 13, Issue 1, 2024, Pages 52-66]
Rafiei, Saeedeh Dyeing of silk fibers with natural dye extracted from different parts of Ficus Johannis Boiss plant [Volume 11, Issue 2, 2022, Pages 1-17]
Rafiei, Saeedeh Comparison of colorimetric parameters and antibacterial effect of two dyes, henna and jaft, on silk [Volume 13, Issue 1, 2024, Pages 15-29]
Rafiei, Saeedeh Comparative study on electrocentrifuge and electrospinning of Polyacrylonitrile as two different methods of creating new nanofilters in environmental refinement [Volume 13, Issue 3, 2024, Pages 1-24]
Rafiei, Saeedeh Investigation and feasibility of using bamboo yarn in the ground layer of handmade carpets with emphasis on physico-mechanical properties [Volume 14, Issue 2, 2025, Pages 19-42]
Rafiei, Saeedeh Application of SWOT Analysis in Developing Strategies for Machine-Made Carpet Industry Development in Domestic and Global Markets [Volume 14, Issue 2, 2025, Pages 68-91]
Rafiei, Saeedeh Sustainable production cycle in the carpet industry: A comprehensive overview of raw materials, processes and circular economy [Volume 15, Issue 1, 2026, Pages 118-149]
Rafizadeh Zaeem, Niloofar Application of smart materials for textile: a review [Volume 12, Issue 4, 2024, Pages 107-135]
Rahbar, Amir Hossein Assessment of the Value Chain Development of PET Chips and Polyester Fibers [Volume 14, Issue 3, 2025, Pages 38-68]
Rahimi, Mohammad Karim Polypropylene non-woven coating with lipid / carboxymethyl cellulose / nanosilver nanomulsion for wound dressese application [Volume 6, Issue 3, 2017, Pages 23-29]
Rahimnezhad, hamedeh Investigation of bagging behavior of cellulosic fabrics printed with madder and sodium alginate [Volume 9, Issue 3, 2020, Pages 37-44]
Rahimnezhad, hamedeh A review of antimicrobial and antiviral methods of masks [Volume 9, Issue 4, 2020, Pages 53-68]
Rahimnezhad, hamedeh The effect of washing cycles on the efficiency of fabric masks treated with hydroxyapatite [Volume 11, Issue 3, 2022, Pages 41-51]
Rahimnezhad, hamedeh Investigating the antibacterial and absorbent properties of disposable masks based on the hydroxyapatite [Volume 12, Issue 2, 2023, Pages 26-40]
Rahimnezhad, Sajedeh Investigation of bagging behavior of cellulosic fabrics printed with madder and sodium alginate [Volume 9, Issue 3, 2020, Pages 37-44]
Rahimnezhad, Sajedeh A review of antimicrobial and antiviral methods of masks [Volume 9, Issue 4, 2020, Pages 53-68]
Rahimnezhad, Sajedeh The effect of washing cycles on the efficiency of fabric masks treated with hydroxyapatite [Volume 11, Issue 3, 2022, Pages 41-51]
Rahimnezhad, Sajedeh Investigating the antibacterial and absorbent properties of disposable masks based on the hydroxyapatite [Volume 12, Issue 2, 2023, Pages 26-40]
Rahmati, Nasrin Antibacterial finishing of cotton with silk hydrogel and chamomile extract [Volume 9, Issue 4, 2020, Pages 35-42]
Rahmaty, Maryam Title: Designing a guerilla marketing model suitable for the clothing industry using a mixed approach [Volume 13, Issue 1, 2024, Pages 67-91]
Rajabi, Fatemeh Dyeing of wool yarns with clove and investigation of antibacterial and ultraviolet protection properties [Volume 11, Issue 4, 2023, Pages 1-14]
Ramakpour, Mahdi Fitting evaluation of women's pants pattern based on body shapes using 3D simulation software [Volume 15, Issue 1, 2026, Pages 20-36]
Ranjbaran Aman, M. Investigation on the Effect of Heat setting on Twist Liveliness and Tensile Properties of Cotton-Covered Polyester Core Spun Yarns [Volume 2, Issue 1, 2012, Pages 27-31]
Ranjbar-Mohammadi, Marziyeh Investigation of the effect of the composition ratio of chitosan nanofibrils/zinc oxide nanoparticles on the properties of the produced composite nanofibers [Volume 14, Issue 1, 2025, Pages 1-15]
Rashidi, A. The Effect of Governing Parameters on Fibers Diameters’ Average and Electric Current of Electrospun Nylon 6 Nanofiber [Volume 1, Issue 1, 2012, Pages 25-30]
Rashidi, AboSaeed Antibacterial finishing of cotton with silk hydrogel and chamomile extract [Volume 9, Issue 4, 2020, Pages 35-42]
Rashidi, A. R. Influential Factors on Proper Implementation of Organizational Resource Programming in Spinning Industry: Case Study of Mazandaran Region [Volume 3, Issue 2, 2013, Pages 15-22]
Rastgar, Abbasali Identifying The Constructive Dimensions Of Entrepreneurial Behavioral Performance To Enter The Apparel Industry: With The Meta-Analysis Approach And Text Mining [Volume 13, Issue 3, 2024, Pages 60-82]
Rastgar, Abbasali Conceptualization of the Employees Brand –building Behavior in the Clothing Industry [Volume 14, Issue 2, 2025, Pages 109-133]
Reyhani, Maryam New product development pattern in Iran's fashion and apparel industry [Volume 13, Issue 1, 2024, Pages 30-51]
Rezaei, Samereh Optimization of physical properties and surface modification of polyester fabric coated with graphene oxide/polyaniline using statistical analysis of central composite design(CCD) [(Articles in Press)]
Rezaei Bagha, Faezeh Starch content evaluation tests of the starch-based polymers; a review [Volume 9, Issue 4, 2020, Pages 5-16]
Rezaei Behbahani, Parivash The process of removing paratoleic acid by advanced oxidation process from the effluent of terephthalic acid production in textile fiber production industries [Volume 12, Issue 1, 2023, Pages 17-26]
Rezvani Ahangarkolaee, Habibeh Analysis of the Factors Affecting the Environmental Aesthetics Attitude of Clothing Consumer (Case study: Students of Islamic Azad University, Central Tehran Branch) [Volume 15, Issue 1, 2026, Pages 37-59]
Rismanchi, Asghar Performance Modelling of Fiber-based Perovskite Solar Cells [Volume 14, Issue 1, 2025, Pages 16-45]
Roostaie, Ali Synthesis of nanocomposite membranes based on polybutylene terephthalate /carbon nanotube for absorption of 2-chloroethyl ethyl sulfide [Volume 9, Issue 2, 2020, Pages 20-30]
Roosta Rafiee, Shiva Examining the Consumer Behavior Path in Men’s Luxury Brands: From Purchase Intention to Brand Advocacy (Case Study: Consumers of Hugo Boss and Giorgio Armani) [(Articles in Press)]
Roustazadeh Sheikh Yousefi, Maryam Identifying the components of digital content production in marketing in the fashion and clothing industry [Volume 13, Issue 3, 2024, Pages 39-59]
S
Sabzalian, Mohammad Reza Investigation and Extraction of Effective Components in Washing Properties of Anabasis Setifera Plant Extract [Volume 5, Issue 2, 2015, Pages 37-42]
Sadeghi, Davoud Nano- and microfibrous electrospun scaffolds for vascular regeneration [Volume 5, Issue 4, 2016, Pages 67-77]
Sadeghi, Davoud Electrospun Nanofibrous Scaffolds for Regeneration of Diseased Vessels [Volume 6, Issue 1, 2017, Pages 67-77]
Sadeghi, Mehdi Synthesis of SBA-15/ZIF-8 nanocomposite for removal of reactive red 198 from textile waste water [Volume 10, Issue 1, 2021, Pages 25-32]
Sadeghi, Mohammad Reza Brand Evaluation and Selection in Sportswear Using a Fuzzy Multi-Criteria Decision-Making Approach [Volume 8, Issue 2, 2019, Pages 5-13]
Sadeghi, Zahra Development of Antibacterial Cotton Wound Dressings Using Kamala Natural Dye and Bio-Mordants: Evaluating the Efficacy of Mordanting Techniques Against Nosocomial Pathogens [(Articles in Press)]
Sadeghi kiakhani, Mousa Application of Emerging Technologies using for Fabrication of Smart Surfaces on Textiles [Volume 7, Issue 3, 2018, Pages 29-38]
Sadrearhami, Zahra Microwave and UV-Assisted Surface Modification of Polypropylene Fibers [Volume 2, Issue 4, 2013, Pages 217-222]
Saeedfar, Fatemeh Development of Antibacterial Cotton Wound Dressings Using Kamala Natural Dye and Bio-Mordants: Evaluating the Efficacy of Mordanting Techniques Against Nosocomial Pathogens [(Articles in Press)]
Safaei, B. Mechanical Properties of Polypropylene/MWCNT Composite Fibers [Volume 2, Issue 3, 2012, Pages 143-150]
Safar Johari, M. Compression Strength of Braided and Filament-wound Tubular Composites [Volume 3, Issue 1, 2013, Pages 11-16]
Safi, M. Effect of Enzymatic Hydrolysis on Physical Properties of Wool Fabric [Volume 2, Issue 1, 2012, Pages 3-8]
Safi, Mahdi Spinnability and Tensile Properties of Poly(ethylene terephthalate) Fibers Blended with Polymeric Ionic Liquids in Melt Spinning Process [Volume 2, Issue 4, 2013, Pages 229-235]
Safi, Mahdi Evaluation of Red color in Amo-Oghli Carpet to Identify Dyeing Formulation [Volume 8, Issue 4, 2020, Pages 49-58]
Safi, Mehdi Melt Spinning of Photoluminescent Polypropylene Fibers Using Phosphorescent Pigments [Volume 5, Issue 3, 2015, Pages 29-33]
Safi Yari, Noushin Visual Identity of Active Brands in the Fashion and Apparel Industry: Application of Qualitative Content Analysis and Delphi Methodologies [(Articles in Press)]
Salavati, Shahram Designing the effect model of social media advertising in domestic clothing industry (Qualitative approach of grounded theory) [Volume 12, Issue 3, 2023, Pages 17-31]
Salehi, Razieh Investigation of Physic-Chemical Properties of Activated Carbon Fabrics Prepared from Cotton Fabric and Nonwoven Polypropylene [Volume 7, Issue 2, 2018, Pages 11-18]
Salimpour Abkenar, Samera Improvement of the Thermal Resistance of Viscose Modified with Poly (amidoamine) Dendrimer [Volume 14, Issue 3, 2025, Pages 13-37]
Salmasi, Samaneh Assessment of the Value Chain Development of PET Chips and Polyester Fibers [Volume 14, Issue 3, 2025, Pages 38-68]
Samei, N. Effect of Interactive Parameters of Temperature and Alkali Concentration on Cotton Fabric Mercerization [Volume 3, Issue 1, 2013, Pages 23-28]
Sarbaha, Seyedeh Samaneh Starch Fibers Production by Wet Spinning in Rotational Coagulation Bath [Volume 2, Issue 4, 2013, Pages 201-207]
Sardarimahvelati, Mahsa Improving the yarn production process by design for Six Sigma approach [Volume 10, Issue 1, 2021, Pages 43-50]
Sarkheil, Saeed Experimental Development of Tactical Aerostat Patching Scheme [Volume 14, Issue 1, 2025, Pages 67-93]
Sarli, Mohammadamin Demand for nanotech masks with superior protection in the world after Corona [Volume 9, Issue 1, 2020, Pages 39-49]
Sarpanahi, Reyhaneh The Effect of Surface Treatment on Mechanical Properties of Plant Fiber-reinforced Polymer Composites: A Review [Volume 8, Issue 2, 2019, Pages 25-36]
Sarvari, Faezeh Study on fabrication and the morphology and Rheology of nanosilica/polypropylene nanocomposite fibers [Volume 11, Issue 2, 2022, Pages 18-27]
Sayary, Maryam The effect of brand awareness on brand equity in sports apparel [Volume 8, Issue 2, 2019, Pages 57-64]
Sayary, Maryam A Decision-making Model for Prioritizing the Factors Affecting the Use of Clothing with the Symbols of the Sasanian Empire on Customer Purchase Behaviour [Volume 8, Issue 3, 2019, Pages 15-22]
Sayary, Maryam Investigating the Impact of Brand Title, Brand Awareness, Brand Attitude, and Brand Reputation on Brand Performance in Garment Industries (Case study of Lc Man Brand) [Volume 9, Issue 1, 2020, Pages 31-38]
Sayary, Maryam Providing a model for predicting the desire of girls' clothing design students to buy clothing inspired by the elements of traditional Iranian clothing [Volume 10, Issue 2, 2021, Pages 36-48]
S. Bafqi, M. Sajad Flexible Fiber Nanogenerator Fabrication by Poly(vinyldene floride) Piezo-polymer [Volume 4, Issue 2, 2014, Pages 35-38]
Seifpour, M. Phase Change Materials and Their Application in Textiles [Volume 1, Issue 1, 2012, Pages 10-18]
Semnani, D. Investigation into Tensional Distribution of Vertical Drape on Voil Net
Fabrics Using Finite Element Method [Volume 1, Issue 1, 2012, Pages 39-42]
Semnani, Dariush Experimental and Numerical Analysis of Air Permeability in Nanofibrous Filters Based on Three-Dimensional Structural Reconstruction and SEM Image Processing [(Articles in Press)]
Semnani Rahbar, Ruhollah Study Flammability Properties of Nylon Moquette Using Cone Calorimetry [Volume 4, Issue 2, 2014, Pages 3-8]
Semnani Rahbar, Ruhollah Tensile Properties-Microstructure Correlations in the Hot-Drawn Nylon 6 Fiber [Volume 5, Issue 2, 2015, Pages 11-20]
Seyedi, Seyed Hosein Identifying factors affecting customer loyalty in clothing stores from the perspective of sellers using a grounded theory approach [Volume 14, Issue 3, 2025, Pages 90-106]
Seyyedi, Leila Preparation and Evaluation of Antibacterial Polypropylene Film Using Nano-coatig
Containing Zinc Oxide and Titanium Dioxide Nanoparticles [Volume 2, Issue 2, 2012, Pages 3-7]
Shahmoradi Ghaheh, Fatemeh Investigation of parameters affecting dyeing of merino wool yarn with chicory leaves plant (Cichorium intybus L) [Volume 9, Issue 4, 2020, Pages 17-23]
Shahmoradi Ghaheh, Fatemeh Dyeing silk fabric using anthocyanin pigments extracted in different solvents from Hibiscus sabdariffa L [Volume 12, Issue 1, 2023, Pages 27-39]
Shahmoradi Ghaheh, Fatemeh Development of Antibacterial Cotton Wound Dressings Using Kamala Natural Dye and Bio-Mordants: Evaluating the Efficacy of Mordanting Techniques Against Nosocomial Pathogens [(Articles in Press)]
Shahriari Namin, P. Extraction of Chitosan from Shrimp Shell: Characterization of Chitosan and Its Application for Removal of Reactive Blue 13 and Acid Green 3 Dyes from an Aqueous Solution [Volume 3, Issue 3, 2013, Pages 3-10]
Shahriyari, Bahareh Effect of warp density, weft Density, and count of pile yarn on mechanical properties and structural variations of face to face woven carpets [Volume 7, Issue 1, 2018, Pages 23-28]
Shaikhzadeh Najar, Saeed The Effects of Take-Up Nozzle and Air-Jet Pressure on the Physical and Mechanical Properties of Rotor-Jet Cotton Yarns [Volume 6, Issue 3, 2017, Pages 5-8]
Shakeri, Maliheh Design and Manufacture of Work Clothing for Women Labors at Garment Factories [Volume 5, Issue 3, 2015, Pages 3-8]
Shakoori, Parinaz Investigation of the effect of the composition ratio of chitosan nanofibrils/zinc oxide nanoparticles on the properties of the produced composite nanofibers [Volume 14, Issue 1, 2025, Pages 1-15]
Shamsaei, R. Factorial Analysis and K-Means Clustering Methods for Extraction of Human Body Size Parameters and Shape Groupings [Volume 3, Issue 3, 2013, Pages 11-16]
Shams Nateri, Ali The effect of nanosilver on the color of dyed cotton fabric with reactive dyes [Volume 14, Issue 4, 2026, Pages 18-38]
Shanbeh, M. Investigation on the Effect of Heat setting on Twist Liveliness and Tensile Properties of Cotton-Covered Polyester Core Spun Yarns [Volume 2, Issue 1, 2012, Pages 27-31]
Shanbeh, M. Effect of Raw Material on Physical and Mechanical Properties of Boucle Fancy Yarns and Weft Knitted Fabrics [Volume 2, Issue 3, 2012, Pages 175-180]
Shanbeh, Mohsen Textiles with Negative Poisson's Ratio [Volume 5, Issue 3, 2015, Pages 19-27]
Shanbeh, Mohsen Kirigami-based wearable sensors: A review of design and performance [Volume 14, Issue 3, 2025, Pages 107-130]
Shanbeh, Mohsen Effect of air jet spinning machine parameters on the characteristics of viscose yarns [(Articles in Press)]
Sharafat, HamidReza 3D geometrical of weave unit cell and pores model and parametric analysis [Volume 14, Issue 1, 2025, Pages 46-66]
Sharahi, Melika Demand for nanotech masks with superior protection in the world after Corona [Volume 9, Issue 1, 2020, Pages 39-49]
Sharaj Sharifi, Azita Designing a Model of Factors Influencing Technological Entrepreneurship in Knowledge-Based Textile Companies [Volume 15, Issue 1, 2026, Pages 87-117]
Sharififard, Hakimeh Removal of reactive red dye 198 by modified apricot kernel shell derived-activated carbon bio-composite: kinetics, equilibrium, and thermodynamics [Volume 12, Issue 4, 2024, Pages 1-17]
Sharififard, iman Removal of reactive red dye 198 by modified apricot kernel shell derived-activated carbon bio-composite: kinetics, equilibrium, and thermodynamics [Volume 12, Issue 4, 2024, Pages 1-17]
Sharzehee, Maryam The effect of anti-wrinkle compounds on physical properties of cellulose fabrics [Volume 8, Issue 2, 2019, Pages 15-24]
Sheikhzadeh, M. Investigating the Effect of Textile Fibers on Ductility of Bitumen [Volume 1, Issue 1, 2012, Pages 31-34]
Shekarchi, Maryam Studying the Effect of Clothes Color Indicators on Customers Loyalty, Mediated by the Brands Character and Credibility (Case study: LC Waikiki of Mazandaran Province) [Volume 7, Issue 2, 2018, Pages 47-56]
Shekarian, Reyhane Garment assembly line balancing using COMSOAL algorithm [Volume 13, Issue 4, 2024, Pages 90-104]
Shekarian, Reyhaneh Fitting evaluation of women's pants pattern based on body shapes using 3D simulation software [Volume 15, Issue 1, 2026, Pages 20-36]
Sherej Sharifi, Azita Providing a scale of customer delight in textiles and clothing with a qualitative and quantitative approach [Volume 12, Issue 4, 2024, Pages 84-106]
Shirazi, Mina Investigating the effect of mordant type, temperature and pH of dyeing bath on the color properties of acrylic yarn dyed with turmeric. [Volume 11, Issue 4, 2023, Pages 15-25]
Shirgholami, Mohammadali Fabrication of ZnTiO₃/Cellulose Nanocomposite Nanofibers Derived from Pine Cone Waste via Electrospinning [(Articles in Press)]
Shirkavand, Behzad The process of removing paratoleic acid by advanced oxidation process from the effluent of terephthalic acid production in textile fiber production industries [Volume 12, Issue 1, 2023, Pages 17-26]
Shirvani, Alireza Identifying the components of digital content production in marketing in the fashion and clothing industry [Volume 13, Issue 3, 2024, Pages 39-59]
Shirzadi, Hengameh Study on melt flow rate behavior of low melt co-polyester using melt flow index evaluation method [Volume 13, Issue 2, 2024, Pages 84-100]
Shokri, Lotfollah An Expert System for Providing Dyeing Recipe of Hand-made Woolen Carpet with Natural Dyes [Volume 5, Issue 1, 2015, Pages 19-28]
Shokri, Mahshid Factors Affecting Consumer Willingness to Pay for Products Based on Iranian - Islamic Fashion in Mazandaran province [Volume 11, Issue 3, 2022, Pages 68-91]
Shokrieh, M.M. A Study on the Effect of Basalt and Nylon Yarns Hybridization on the Tensile Properties of Their Weaved Fabrics [Volume 2, Issue 1, 2012, Pages 39-44]
Shushatri, A.M. A Feasibility Study on Producing of High Tenacity Polyethylene Terephthalate Multifilament Yarn with Optimization of Drawing Process Parameters [Volume 2, Issue 1, 2012, Pages 15-20]
Shushtari, A.M. Effect of Enzymatic Hydrolysis on Physical Properties of Wool Fabric [Volume 2, Issue 1, 2012, Pages 3-8]
Sohrabi, Majid Creating Electrical Conductivity in Cotton and Polyester Fabrics using In-Situ Chemical Polymerization of Polypyrrole Process and Evaluating Their Functional Properties [Volume 15, Issue 1, 2026, Pages 60-86]
Soleimani Ashrafi, M. Effect of Sliver Feeding Position in a Drawing Frame on Radial Distribution of Fibers in Cross-Section of Cotton-Polyester Blended Yarn [Volume 3, Issue 2, 2013, Pages 39-46]
Solouk, Atefeh Nano- and microfibrous electrospun scaffolds for vascular regeneration [Volume 5, Issue 4, 2016, Pages 67-77]
Solouk, Atefeh Electrospun Nanofibrous Scaffolds for Regeneration of Diseased Vessels [Volume 6, Issue 1, 2017, Pages 67-77]
Solouk, Atefeh Review of extraction methods of Keratin from fibers and its applications as medical textiles [Volume 9, Issue 1, 2020, Pages 5-19]
Soltani, Ehsan Small and Medium Enterprises and Iran’s Textile Industries [Volume 4, Issue 4, 2015, Pages 55-58]
Soltani, Ehsan Fast Fashion; A Development Way to Iranian's Apparel Industry [Volume 5, Issue 1, 2015, Pages 43-48]
Soltani, parham Experimental and Numerical Analysis of Air Permeability in Nanofibrous Filters Based on Three-Dimensional Structural Reconstruction and SEM Image Processing [(Articles in Press)]
Soltanzadeh, Zeynab The effect of bagging cyclic forces on the mechanical properties of seam [Volume 9, Issue 2, 2020, Pages 31-40]
Soofiani, Shaya The effect of design and interior space in clothing retailers stores on the customer’s purchasing behavior [Volume 13, Issue 4, 2024, Pages 73-89]
T
Tabaeeian, Reihaneh Alsadat A clarification of relationship between strategic human resource management and firm performance.
( case sudy: The Yazd elected spinning factories.) [Volume 6, Issue 3, 2017, Pages 37-43]
Tabarbaeei, M. M. A. Influential Factors on Proper Implementation of Organizational Resource Programming in Spinning Industry: Case Study of Mazandaran Region [Volume 3, Issue 2, 2013, Pages 15-22]
Tabatabaienasab, Zohreh Circular economy and fashion industry: Drawing a scientific map of international research in the reference database Web of Science [Volume 12, Issue 3, 2023, Pages 32-54]
Tabrizian, Fatemehzahra Conceptualization of the Employees Brand –building Behavior in the Clothing Industry [Volume 14, Issue 2, 2025, Pages 109-133]
Tadi Beni, Z. Compression Strength of Braided and Filament-wound Tubular Composites [Volume 3, Issue 1, 2013, Pages 11-16]
Taghipourian, Mohammad Javad The Role of Intergenerational Communication (Child-Parent) On Brand Equity in Clothing Purchase at Different Levels of Situational Involvement [Volume 10, Issue 4, 2021, Pages 71-90]
Taghipourian, Mohammad Javad Title: Designing a guerilla marketing model suitable for the clothing industry using a mixed approach [Volume 13, Issue 1, 2024, Pages 67-91]
Taghipourian, Mohammad Javad Designing a Model of Factors Influencing Technological Entrepreneurship in Knowledge-Based Textile Companies [Volume 15, Issue 1, 2026, Pages 87-117]
Tajary Sarab, E. Development and Characterization of Hollow Nanofibers: A Review [Volume 3, Issue 3, 2013, Pages 39-60]
Talebian, Aazam A Study on nickel and iron removal from wastewater by polyacrylonitrile/thermoplastic polyurethane nanofibers [Volume 13, Issue 4, 2024, Pages 1-11]
Talebian, Azam Study on morphology characterization of gelatin nanofibers [Volume 7, Issue 1, 2018, Pages 5-10]
Talebian, Azam A review on the medical application of electrospun nanofibers [Volume 8, Issue 1, 2019, Pages 31-44]
Talebian, Azam Study on the Properties of Bacterial Cellulose Containing Dendrimers, Plant and Chemical Materials [Volume 10, Issue 4, 2021, Pages 109-126]
Talebian, Azam Study on fabrication and the morphology and Rheology of nanosilica/polypropylene nanocomposite fibers [Volume 11, Issue 2, 2022, Pages 18-27]
Talebpour, Farideh Investigating the effect of natural thickeners on the Fastness of Thermochromic color in the smartening of cotton fabric [Volume 13, Issue 2, 2024, Pages 1-15]
Talebpour, Farideh Design of modular clothing using 3D printing technology with the approach to sustainability in fashion [Volume 13, Issue 3, 2024, Pages 83-104]
Tavakoli, A. The Effect of Governing Parameters on Fibers Diameters’ Average and Electric Current of Electrospun Nylon 6 Nanofiber [Volume 1, Issue 1, 2012, Pages 25-30]
TAVANA, Reza The effect of traveller weight on twisting rate, strength, hairiness, neps and thinness and thickness points of polyester and cotton blend yarns [Volume 12, Issue 1, 2023, Pages 40-50]
Tavanaei, M. A. Image Processing for Optimization of Thresholding Methods and Determination of Nanofibers Diameter [Volume 3, Issue 3, 2013, Pages 17-28]
Tavanaie, Mohammad Ali A Feasibility Study on Producing of High Tenacity Polyethylene Terephthalate Multifilament Yarn with Optimization of Drawing Process Parameters [Volume 2, Issue 1, 2012, Pages 15-20]
Tavanaie, Mohammad Ali Optimization and Prediction of Mechanical Properties of Polypropylene/Poly(butylene
terephthalate) Blend Fibers Using Response Surface Methodology [Volume 2, Issue 2, 2012, Pages 104-113]
Tavanaie, Mohammad Ali Spinnability and Tensile Properties of Poly(ethylene terephthalate) Fibers Blended with Polymeric Ionic Liquids in Melt Spinning Process [Volume 2, Issue 4, 2013, Pages 229-235]
Tavanaie, Mohammad Ali Tensile Properties-Microstructure Correlations in the Hot-Drawn Nylon 6 Fiber [Volume 5, Issue 2, 2015, Pages 11-20]
Tavanaie, Mohammad Ali Melt Spinning of Photoluminescent Polypropylene Fibers Using Phosphorescent Pigments [Volume 5, Issue 3, 2015, Pages 29-33]
Tavanaie, Mohammad Ali A morphology study of PA 6 electrospun nanofibers using single and double side nozzles jet [Volume 6, Issue 2, 2017, Pages 51-43]
Tavanaie, Mohammad Ali Investigating and modeling the effect of magnetic field shape on electrospinning process [Volume 8, Issue 2, 2019, Pages 37-47]
Tavanaie, Mohammad Ali Starch content evaluation tests of the starch-based polymers; a review [Volume 9, Issue 4, 2020, Pages 5-16]
Tavanaie, Mohammad Ali Study on melt flow rate behavior of low melt co-polyester using melt flow index evaluation method [Volume 13, Issue 2, 2024, Pages 84-100]
Tayebi, Habib-Allah Synthesis of SBA-15/ZIF-8 nanocomposite for removal of reactive red 198 from textile waste water [Volume 10, Issue 1, 2021, Pages 25-32]
Tayebi, Habib-Allah Adsorption of Reactive Red 198 on Silicate Magnetic Nano Structure: Adsorption Studies and Modeling [Volume 11, Issue 3, 2022, Pages 1-17]
Tayebi, Habib-Allah A comparative study of surrealism style in the works of Salvador Dali and Iran Droudy and its application in conceptual clothing design [Volume 11, Issue 4, 2023, Pages 56-76]
Tehrani, Majid Investigation of parameters affecting dyeing of merino wool yarn with chicory leaves plant (Cichorium intybus L) [Volume 9, Issue 4, 2020, Pages 17-23]
Tehrani, Majid Dyeing silk fabric using anthocyanin pigments extracted in different solvents from Hibiscus sabdariffa L [Volume 12, Issue 1, 2023, Pages 27-39]
Tehrani, Majid Investigating the effect of acid and metal mordant types on the colorimetric and fastness properties of woolen yarn dyed with cinnamon bark as a natural dye [Volume 13, Issue 1, 2024, Pages 1-14]
Tehrani, Majid Evaluation of the color strength and color fastness of wool yarns dyed with colorant extracted from Syzygium aromaticum (clove) in alcoholic, acidic and alkaline solvents. [Volume 13, Issue 3, 2024, Pages 25-38]
Tehrani, Majid The effect of plant and metallic mordants on the colorimetric and fastness properties of wool yarns dyed with cochineal natural colorant [Volume 14, Issue 1, 2025, Pages 114-133]
Tehrani, Majid Eco-Friendly Dyeing of Cotton Fabric with Anthocyanins Extracted from Red Cabbage: Optimization of the Extraction Process and Comparative Evaluation of Natural and Metallic Mordants [Volume 14, Issue 4, 2026, Pages 1-17]
Tehrani, Majid Eco-Friendly Dyeing of Cotton Fabric with Anthocyanins Extracted from Red Cabbage: Optimization of the Extraction Process and Comparative Evaluation of Natural and Metallic Mordants [(Articles in Press)]
Tehrani bagha, Alireza Comparison of Various Advanced Oxidation Processes Based on Ozonation and UV Irradiation for Treatment of Wastewater-Containing Reactive Dyes [Volume 4, Issue 1, 2014, Pages 35-42]
Tehranibagha, A. Study on Properties and Applications of Esterquats Based on Tallow Fatty Acid and Palm Stearin Methyl Ester [Volume 1, Issue 1, 2012, Pages 5-9]
Tehrani Dehkordi, M. A Study on the Effect of Basalt and Nylon Yarns Hybridization on the Tensile Properties of Their Weaved Fabrics [Volume 2, Issue 1, 2012, Pages 39-44]
Tehrani Dehkordi, Majid Analytical Investigation on the Tensile Behavior of Hybrid Plain-woven Fabrics [Volume 2, Issue 2, 2012, Pages 115-122]
Toosi Jamali, M.R Evaluation of Reactive Dye Adsorption by Chitosan-Treated Cotton Fabrics [Volume 3, Issue 2, 2013, Pages 3-8]
Torabi, Parisa Evaluation of strain and deformation of the surface of woven fabrics using image correlation method [Volume 11, Issue 4, 2023, Pages 26-40]
Torkiyan, Leyla The Effect of Nano TiO2 Morphology and Au Nano coating on the cellulose Fabric to Performance of Self-cleaning Properties [Volume 5, Issue 4, 2016, Pages 17-23]
V
Vadood, Morteza Simulation of concentrated tensile test on the spunbond nonwoven fabrics using finite element method [Volume 14, Issue 4, 2026, Pages 95-110]
Valikhani, S. Synthesis of a Novel Disperse Dye Based on Benzothiazol
and Investigation of Its Dyeing Properties on Polyester Fibres [Volume 1, Issue 1, 2012, Pages 35-38]
Valipour, P. A Study on the Effect of Nano Organocalay on Morphology and Dyeability of Polypropylene/ Polyamide 6 Blend Nanocomposite Fibers [Volume 2, Issue 1, 2012, Pages 21-26]
Valipour, P. Evaluation of Reactive Dye Adsorption by Chitosan-Treated Cotton Fabrics [Volume 3, Issue 2, 2013, Pages 3-8]
Valipour, P. Effect of Sliver Feeding Position in a Drawing Frame on Radial Distribution of Fibers in Cross-Section of Cotton-Polyester Blended Yarn [Volume 3, Issue 2, 2013, Pages 39-46]
Valipour, Peiman Preparation and Evaluation of Antibacterial Polypropylene Film Using Nano-coatig
Containing Zinc Oxide and Titanium Dioxide Nanoparticles [Volume 2, Issue 2, 2012, Pages 3-7]
Valipour, Peiman Investigation of thermal, mechanical and electrical properties of modified carbon nanotubes reinforced epoxy composites [Volume 8, Issue 1, 2019, Pages 5-11]
Valipour, Peiman Adsorption of Reactive Red 198 on Silicate Magnetic Nano Structure: Adsorption Studies and Modeling [Volume 11, Issue 3, 2022, Pages 1-17]
Valipour, Peiman Comparative study on electrocentrifuge and electrospinning of Polyacrylonitrile as two different methods of creating new nanofilters in environmental refinement [Volume 13, Issue 3, 2024, Pages 1-24]
Valipour, Peiman Business Process Management Risks Using Failure Mode Analysis and Multi-Criteria Decision Making (Case Study of Dyeing, Printing and Finishing Factory of Baloch Industries Development) [Volume 14, Issue 4, 2026, Pages 79-94]
Valipour, Peiman Effect of the Preparation Process on the Properties of Bacterial Cellulose/Polyethylene Glycol Nanocomposites as Bio-based Synthetic Leather [(Articles in Press)]
Valipour, Peyman Identifying the influential factors on the competitiveness ability of textile industry clusters [Volume 5, Issue 4, 2016, Pages 31-41]
Valipour, Peyman Influential Factors on the Competitiveness of Textile Industry Clusters [Volume 6, Issue 1, 2017, Pages 31-41]
Valipour, Pieman Providing a model for predicting the desire of girls' clothing design students to buy clothing inspired by the elements of traditional Iranian clothing [Volume 10, Issue 2, 2021, Pages 36-48]
Valipour, Pieman Improving the Electrical and Anti-bacterial Properties of Cotton Fabric Using Graphene Oxide [Volume 10, Issue 1, 2021, Pages 15-23]
Valipour, Pieman Comparative Study of one- and two-factors Reactive Dye Adsorption Isotherms on Cellulose Fabric using Urea, Dispersing and Penetrating auxiliary Material [Volume 10, Issue 3, 2021, Pages 1-19]
Valipour, Pieman Investigating the influencing factors on consumer choice based on the unusual graphic design of clothing packaging [Volume 11, Issue 4, 2023, Pages 77-90]
Valipour, Pieman Investigating factors affecting the acceptance of Internet of Things (IOT) in the digital clothing supply chain using FUZZY AHP and WASPAS techniques [Volume 12, Issue 4, 2024, Pages 18-34]
Valipour, Pieman A Review of Sustainability and Development Factors in Iran'sTextile and Clothing Industry [Volume 12, Issue 3, 2023, Pages 93-125]
Valipour, Pieman Design of modular clothing using 3D printing technology with the approach to sustainability in fashion [Volume 13, Issue 3, 2024, Pages 83-104]
Valipour, Pieman Presenting a marketing model for the development of sustainable fashion and clothing industry after the Corona epidemic [Volume 13, Issue 4, 2024, Pages 54-72]
Valipour, Pieman Application of SWOT Analysis in Developing Strategies for Machine-Made Carpet Industry Development in Domestic and Global Markets [Volume 14, Issue 2, 2025, Pages 68-91]
Valipour, Pieman Optimization of physical properties and surface modification of polyester fabric coated with graphene oxide/polyaniline using statistical analysis of central composite design(CCD) [(Articles in Press)]
VALIPOUR, PEIMAN Evaluating the Interactive Effect of Temperature and Alkali Concentration on Dye Absorption of Mercerized Cotton Plain Knitted Fabric [Volume 4, Issue 1, 2014, Pages 27-34]
VALIPOUR, PEIMAN The study of the effect of Clothing related attributes on the brand equity of Men and woman (CASE STUDY: LC Wikiki of Mazandaran province [Volume 6, Issue 4, 2018, Pages 15-27]
VALIPOUR, PEIMAN Studying the Effect of Clothes Color Indicators on Customers Loyalty, Mediated by the Brands Character and Credibility (Case study: LC Waikiki of Mazandaran Province) [Volume 7, Issue 2, 2018, Pages 47-56]
VALIPOUR, PEIMAN The effect of brand awareness on brand equity in sports apparel [Volume 8, Issue 2, 2019, Pages 57-64]
VALIPOUR, PEIMAN A Decision-making Model for Prioritizing the Factors Affecting the Use of Clothing with the Symbols of the Sasanian Empire on Customer Purchase Behaviour [Volume 8, Issue 3, 2019, Pages 15-22]
VALIPOUR, PEIMAN Investigating the Impact of Brand Title, Brand Awareness, Brand Attitude, and Brand Reputation on Brand Performance in Garment Industries (Case study of Lc Man Brand) [Volume 9, Issue 1, 2020, Pages 31-38]
Valipouri, Afsaneh Factors Influencing the Purchase of Clothing [Volume 5, Issue 1, 2015, Pages 37-42]
Valipouri, Afsaneh Fabricating the Polymeric Micro-Platelets via Electro-Centrifuge Spinning System [Volume 6, Issue 4, 2018, Pages 39-45]
Valipouri, Afsaneh Different factors of university manteau and their way of influencing people’s choices [Volume 7, Issue 1, 2018, Pages 39-46]
Valipouri, Afsaneh Investigating the antibacterial effect of wound healing with Henna extract: [Volume 7, Issue 2, 2018, Pages 19-24]
Valipouri, Afsaneh Evaluating the Triboelectric Performance of wearable Textiles in the conversion of Mechanical Energy to Electrical Energy [Volume 9, Issue 3, 2020, Pages 51-57]
Valipouri, Afsaneh Garment assembly line balancing using COMSOAL algorithm [Volume 13, Issue 4, 2024, Pages 90-104]
Valipouri, Afsaneh Fitting evaluation of women's pants pattern based on body shapes using 3D simulation software [Volume 15, Issue 1, 2026, Pages 20-36]
Varsei, Mehdi Statistical optimization of nanofiber filter containing carbon nanotube [Volume 11, Issue 2, 2022, Pages 28-46]
Varsei, Mehdi Experimental and numerical investigation of shear modulus of composites reinforced with 3D orthogonal fabric [Volume 12, Issue 1, 2023, Pages 51-64]
Vida, Tameh Design of modular clothing using 3D printing technology with the approach to sustainability in fashion [Volume 13, Issue 3, 2024, Pages 83-104]
Y
Yousefzadeh, Maryam Nano- and microfibrous electrospun scaffolds for vascular regeneration [Volume 5, Issue 4, 2016, Pages 67-77]
Yousefzadeh, Maryam Electrospun Nanofibrous Scaffolds for Regeneration of Diseased Vessels [Volume 6, Issue 1, 2017, Pages 67-77]
Zaarei, Davood A review study of the effect of carbon nanofibers on the curing kinetics of epoxy resins [Volume 10, Issue 1, 2021, Pages 51-61]
Zadhoosh, Ali Investigation into the Energy Absorption Capacity of Reinforced Composite by
3D weft-knitted Fabrics [Volume 2, Issue 2, 2012, Pages 65-70]
Zaerhosseini, Mahya A morphology study of PA 6 electrospun nanofibers using single and double side nozzles jet [Volume 6, Issue 2, 2017, Pages 51-43]
Zaersabet, Hosein Adsorption of Reactive Red 198 on Silicate Magnetic Nano Structure: Adsorption Studies and Modeling [Volume 11, Issue 3, 2022, Pages 1-17]
Zahmatkesh, Parna Conceptualization of the Employees Brand –building Behavior in the Clothing Industry [Volume 14, Issue 2, 2025, Pages 109-133]
Zahmatkesh, Somaye Decoloration Of Direct Red 23 Wastewater Using UV/TiO2/β-Cyclodextrin Method [Volume 5, Issue 4, 2016, Pages 25-30]
Zahmatkesh, Somaye Decolorization of C.I. Direct Red 23 in Aqueous Solution Using UV/TiO2/β-Cyclodextrin Method [Volume 6, Issue 1, 2017, Pages 25-30]
ZAMANI, TAHEREH Investigation into the Effects of Nano-fibrous Wound Dressings on Wound Healing Process in Animal Models [Volume 8, Issue 4, 2020, Pages 29-48]
Zangiyan, somayeh Identifying The Constructive Dimensions Of Entrepreneurial Behavioral Performance To Enter The Apparel Industry: With The Meta-Analysis Approach And Text Mining [Volume 13, Issue 3, 2024, Pages 60-82]
Zare, Abolfazl The effect of washing cycles on the efficiency of fabric masks treated with hydroxyapatite [Volume 11, Issue 3, 2022, Pages 41-51]
Zare Bidaki, Farzaneh Introduction of protective gloves and their performance evaluation methods [Volume 7, Issue 3, 2018, Pages 19-28]
Zarei, Ali Present and Test a Model in the Field of Branding Sports Products with a Mixed Approach [Volume 10, Issue 3, 2021, Pages 71-86]
Zarei, Ali Investigating the influential branding variables in women's sport products and presenting a structural model [Volume 11, Issue 4, 2023, Pages 41-55]
Zare Mehrjardi, Abolfazl Investigation of bagging behavior of cellulosic fabrics printed with madder and sodium alginate [Volume 9, Issue 3, 2020, Pages 37-44]
Zare Mehrjardi, Abolfazl A review of antimicrobial and antiviral methods of masks [Volume 9, Issue 4, 2020, Pages 53-68]
Zare Mehrjardi, Abolfazl Investigating the antibacterial and absorbent properties of disposable masks based on the hydroxyapatite [Volume 12, Issue 2, 2023, Pages 26-40]
Zare Mehrjardi, Abolfazl Coating cotton fabric with barium-doped bismuth tungstate nanocomposite and hydroxyapatite to improve radiation protection and physical-comfort properties [Volume 14, Issue 4, 2026, Pages 39-56]
Zarenejad, Z. Garment Images Clustering Based on Image Processing Techniques and K-Means Algorithm [Volume 3, Issue 1, 2013, Pages 3-10]
Zarezade, Tahereh 3D Garment Design Using Interactive Genetic Algoritm And k-means Clustering [Volume 5, Issue 4, 2016, Pages 3-15]
Zargham, SH. The Effect of Governing Parameters on Fibers Diameters’ Average and Electric Current of Electrospun Nylon 6 Nanofiber [Volume 1, Issue 1, 2012, Pages 25-30]
Zarrebini, Mohammad Crease Recovery Angle of Weft-knitted Fabrics Produced by Shape Memory Polymer- Coated Yarn [Volume 3, Issue 4, 2014, Pages 9-12]
Zarrebini, Mohammad Effect of air jet spinning machine parameters on the characteristics of viscose yarns [(Articles in Press)]
Zaveri, Qodratollah Modeling of the effect of weft yarn properties and air-jet loom speed on the weft yarn arrival time and its tension [Volume 5, Issue 1, 2015, Pages 3-10]
Zebarjad, Seyed Mojtaba Treatment of Cotton Fibers with Hydrophilic Compounds for Production of Photo catalytic Fabrics [Volume 4, Issue 3, 2014, Pages 21-27]
Zeinalpour yazdy, Mona A Review for Camouflage Pattern Designing, Evaluating and Breaking Methods [Volume 6, Issue 3, 2017, Pages 9-21]
ZeynivandMojarrad, Maryam Comparison The Behavior of Monolithic and Non-monolithic Textile Reinforced Composite elbows under Hydrostatic Pressure [Volume 9, Issue 3, 2020, Pages 29-36]
Zoghi, Maryam Effective Parameters for Laser Cutting of Fabrics [Volume 12, Issue 1, 2023, Pages 65-78]
Zolriasatein, Ali Akbar Effect of Ultraviolet Irradiation on Thermodynamic, Kinetic and Adsorption Isotherm of Direct dye onto Cellulose Acetate Fabric [Volume 11, Issue 1, 2022, Pages 11-27]
Zolriasatein, Ali Akbar Removal of Dyes from Textile Effluent by Using Organic Solvents and Surfactants [Volume 11, Issue 3, 2022, Pages 18-40]
Zolriasatein, Ali Akbar Investigating the dyeability and adsorption isotherm of jute fibers coated with nano silver and methyl methacrylate with metal complex dye [Volume 12, Issue 1, 2023, Pages 1-16]
