نوع مقاله : مقاله مروری
عنوان مقاله English
نویسندگان English
Air pollution, particularly fine and ultrafine particulate matter, poses a serious threat to human health. Electrospun nanofibrous membranes are an effective strategy for pollutant removal. In this review, the principles and equipment of electrospinning; system, process, and environmental variables; filtration mechanisms including interception, inertial impaction, Brownian diffusion, and electrostatic effects; the influence of fiber diameter, porosity, basis weight, and thickness; and synthetic polymers, polymer/additive blends, and bio-based polymers are evaluated. Membranes with fiber diameters of 50–500 nm exhibited PM2.5 filtration efficiencies of up to 99% owing to their high specific surface area and tunable porosity. An examination of ten different samples showed that filtration efficiency ranged from 79.63% to 99.99%, pressure drop from approximately 16 to 204 Pa, and quality factor (QF) from 0.029 to 0.388 Pa⁻¹. Among these samples, only the fractal zein membrane and the N95 filter mask were tested under identical and comparable conditions. The zein membrane, with a basis weight of 0.45 g/m², exhibited an efficiency of 99.81%, a pressure drop of 56.2 Pa, and a QF of 0.111 Pa⁻¹ in the filtration of sodium chloride particles with a diameter of 0.3 µm at a face velocity of 3.5 cm/s; the corresponding values for the N95 filter mask were 97.08%, 59.2 Pa, and 0.060 Pa⁻¹, respectively. Furthermore, the incorporation of metal oxide nanoparticles and cyclodextrin into the membrane was shown to provide adsorption of volatile organic compounds and antibacterial properties. The review also examines production cost, scalability, stability under humid conditions and long-term loading, electrical charge stability, and the development of smart and multifunctional membranes.
کلیدواژهها English