علوم و فناوری نساجی و پوشاک

علوم و فناوری نساجی و پوشاک

ریسک های مدیریت فرآیند کسب و کار با روش تجزیه تحلیل حالت‌های شکست و تصمیم گیری چند معیاره (مورد مطالعه رنگرزی، چاپ و تکمیل کارخانه گسترش صنایع بلوچ)

نوع مقاله : مقاله پژوهشی

نویسندگان
1 دانشکده مهندسی نساجی، پوشاک و مد، واحد قائم شهر، دانشگاه آزاد اسلامی، قائم شهر، ایران
2 استاد، دانشکده مهندسی نساجی، پوشاک و مد، واحد قائم شهر، دانشگاه آزاد اسلامی، قائم شهر، ایران
3 تکنولوژی نساجی، مهندسی نساجی، دانشگاه یزد، یزد، ایران
4 استادیار، دانشکده مهندسی نساجی، پوشاک و مد، واحد قائم شهر، دانشگاه آزاد اسلامی، قائم‌شهر، ایران
5 استادیار، دانشکده مهندسی نساجی پوشاک و مد، واحد قائم‌شهر، دانشگاه آزاد اسلامی، قائم‌شهر، ایران
چکیده
هدف این پژوهش اولویت بندی ریسک های مدیریت فرآیند کسب و کار با روش تجزیه تحلیل حالت‌های شکست و تصمیم‌گیری چند معیاره رنگرزی، چاپ و تکمیل کارخانه گسترش صنایع بلوچ بود. تحقیق انجام شده از لحاظ هدف کاربردی و به لحاظ روش پیمایشی می‌باشد. حجم نمونه خبرگان انتخاب شده شامل مدیران و متخصصان شاغل در کارخانه رنگرزی گسترش صنایع بلوچ بودند که به صورت گلوله برفی انتخاب شده‌اند. ابزار پژوهش به صورت پرسشنامه استاندارد و ابزار تجزیه و تحلیل داده‌ها تکنیک FMEA و AHP بود. در تحقیق انجام شده 29 ریسک شناسایی شد، نتایج نشان داد ریسک‌های اصلی شناسایی شده شامل تجهیزات، ایمنی، موارد اولیه و مدیریت بود. از بین ریسک های شناسایی شده، 26 ریسک با استفاده از تکنیک FMEA تایید شد، همچنین تکنیک AHP نشان داد ریسک تجهیزات در اولویت اول قرار دارد.
کلیدواژه‌ها

موضوعات


عنوان مقاله English

Business Process Management Risks Using Failure Mode Analysis and Multi-Criteria Decision Making (Case Study of Dyeing, Printing and Finishing Factory of Baloch Industries Development)

نویسندگان English

Ramezan Ali Babajani 1
Peiman Valipour 2
Mohammad Davoudabadi Farahani 3
Mohammad Ebrahim Heydari Golfzani 4
Alireza Hoseinpour Kasgari 5
1 Ms.S Stu. of Textiel Engineering. Apparle and Fashion, QaS.C.,Islamic Azad University, Qaemshahr, Iran
2 Professor of Textiel Engineering. Apparle and Fashion, QaS.C.,Islamic Azad University, Qaemshahr, Iran
3 Department of Textile Engineering, Yazd University, Yazd, Iran
4 Asistant Professor of Textiel Engineering. Apparle and Fashion, QaS.C.,Islamic Azad University
5 Assistant Professor of Textiel Engineering. Apparle and Fashion, QaS.C.,Islamic Azad University.Qaem Shahr.IRAN
چکیده English

The aim of this research was to prioritize business process management risks using failure mode analysis and multi-criteria decision-making in the dyeing, printing and finishing factory of Baloch Industries Development. The research was applied in terms of its purpose and survey method. The sample size of the selected experts included managers and specialists working in the dyeing factory of Baloch Industries Development, who were selected in a snowball method. The research tool was a standard questionnaire and the data analysis tool was the FMEA and AHP techniques. 29 risks were identified in the research, the results showed that the main risks identified included equipment, safety, primary items and management. Among the identified risks, 26 risks were confirmed using the FMEA technique, and the AHP technique also showed that the equipment risk is in the first priority.

کلیدواژه‌ها English

: Management
Risk
Dyeing
Printing and Finishing
Equipment
Safety
[1] Ronyastra, I. M., Sutrisna, P. D., Waluyo, P. W., Winadi, A. S., & Priyantini, H. R. (2020, December). Risk modelling in financial feasibility study for caesalpinia sappan natural dyes factory in Surakarta. In IOP Conference Series: Materials Science and Engineering (Vol. 1003, No. 1, p. 012091). IOP Publishing
[2] Sutrisna, R P Hadi, J J Valentina, H R Priyantini, P W Waluyo and I M Ronyastra .(2020). Natural Dyes Extraction Intended for Coloring Process in Fashion Natural Dyes Extraction Intended for Coloring Process in Fashion Indutries IOP Conf. Ser. Mater. Sci. Eng. 833
[3] Haji and M Naebe.( 2020). Cleaner dyeing of textiles using plasma treatment and natural dyes: A review J. Clean. Prod. 265 p 121866
[4] Clarke and A Low .(1993). Risk analysis in project planning: A simple spreadsheet application using monte-carlo techniques Proj. Apprais. 8 (3) pp 141–146
[5] Phan, E Van Den Broeck, V Van Speybroeck, K De Clerck K Raes and S De Meester .(2020). The potential of anthocyanins from blueberries as a natural dye for cotton: A combined experimental and theoretical study Dye. Pigment. 176 108180
[6] Betül, Özer., Behcet, Guven. (2021). 3. Energy efficiency analyses in a Turkish fabric dyeing factory. Energy Sources Part A-recovery Utilization and Environmental Effects, doi: 10.1080/15567036.2020.1755392
[7] M., Thangatamilan., S., J., Suji, Prasad., C., Sagana., R., Subikshaa., D., P., Kumar., M., M., Shimak. (2023). 1. Automation and Control Mechanism For Textile Dyeing Process Using PLC and IoT. doi: 10.1109/iccpct58313.2023.10244880
[8] Huang, X., Sun, M., & Wang, D. (2022). Work harder and smarter: The critical role of teachers’ job crafting in promoting teaching for creativity. Teaching and teacher education, 116, 103758.
[9] Devanakonda, Mahendra., Muthukumar, k. (2019). 1. Hazards and safety measures in dying process in textile industry.
[10] Nazneen, Jabeen., Arushi, Jabeen. (2017). 1. To Identify Hazards and Risks (Health and Safety) in the Textile Dyeing Industry. Asian Journal of Home Science, doi: 10.15740/HAS/AJHS/12.1/182-187
[11] Shahid-ul-Islam., B., S., Butola. (2018). 5. Green Dyeing of Cotton- New Strategies to Replace Toxic Metallic Salts. doi: 10.1007/978-981-10-4876-0_3
[12] N., Hemashenpagam., S., Selvajeyanthi. (2023). 4. Textile Dyes and Their Effect on Human Beings. doi: 10.1007/978-981-99-3901-5_3
[13] Farrukh, A., & Sajjad, A. (2024). Investigating Supply Chain Disruptions and Resilience in the Textile Industry: A Systemic Risk Theory and Dynamic Capability-Based View. Global Journal of Flexible Systems Management, 1-27.
]14[ رحیمی کلور, اکبری آرباطان, گلثوم. (1402). واکاوی چالش‌ها و فرصت‌های هوش مصنوعی بر توسعه کارآفرینی و رشد کسب‌وکارهای نوپا. علوم و فنون مدیریت اطلاعات, 9(4), 205-232.
 [15] SE, S., & RM, E. (2024). OCCUPATIONAL HEALTH DISORDERS AMONG WORKERS IN TEXTILE DYEING INDUSTRY. Egyptian Journal of Occupational Medicine, 48(3), 95-111.
[16] Seidu, R. K., Ofori, E. A., Eghan, B., Fobiri, G. K., Afriyie, A. O., & Acquaye, R. (2024). A systematic review of work-related health problems of factory workers in the textile and fashion industry. Journal of Occupational Health, 66(1), uiae007.

  • تاریخ دریافت 28 مهر 1404
  • تاریخ بازنگری 23 آبان 1404
  • تاریخ پذیرش 30 آذر 1404