Document Type : Research/ Original/ Regular Article
Authors
1 Department of Textile Engineering, Science and Research Branch, Islamic Azad University, Tehran, Iran.
2 Department of Textile Engineering, Science and Research Branch, Islamic Azad University, Tehran, Iran
3 -Department of Textile Engineering, Isfahan University of Technology, Isfahan, Iran
4 Department of Textile Engineering, Yazd Branch, Islamic Azad University, Yazd, Iran
Abstract
Keywords
Main Subjects
[1].K. Bilisik, "Multiaxis 3D weaving: Comparison of developed two weaving methods (tube-rapier weaving versus tube-carrier weaving) and effects of bias yarn path to the preform properties," Fibers and Polymers, vol. 11, no. 1, pp. 104-114, 2010.
[2].W. Hufenbach, R. Böhm, L. Kroll, and A. Langkamp, "Theoretical and experimental investigation of anisotropic damage in textile-reinforced composite structures," Mechanics of Composite Materials, vol. 40, no. 6, pp. 519-532, 2004.
[3].A. P. Mouritz, M. K. Bannister, P. Falzon, and K. Leong, "Review of applications for advanced three-dimensional fibre textile composites," Composites Part A: applied science and manufacturing, vol. 30, no. 12, pp. 1445-1461, 1999.
[4].H. Hasani, S. Hassanzadeh, M. J. Abghary, and E. Omrani, "Biaxial weft-knitted fabrics as composite reinforcements: A review," Journal of Industrial Textiles, vol. 46, no. 7, pp. 1439-1473, 2017.
[5].R. Hessami, A. Alamdar Yazdi, and A. Mazidi, "The effect of loop density on the tensile behavior of biaxial weft knitted composites using both experimental tests and numerical method," Journal of Industrial Textiles, p. 1528083719868177, 2019.
[6].M. Ansar, W. Xinwei, and Z. Chouwei, "Modeling strategies of 3D woven composites: A review," Composite structures, vol. 93, no. 8, pp. 1947-1963, 2011.
[7].A. W. Van Vuure, J. Ivens, and I. Verpoest, "Mechanical properties of composite panels based on woven sandwich-fabric preforms," Composites Part A: Applied Science and Manufacturing, vol. 31, no. 7, pp. 671,2000.
[8].D. Zhang, Y. Sun, L. Chen, and N. Pan, "A comparative study on low-velocity impact response of fabric composite laminates," Materials & Design, vol. 50, pp. 750-756, 2013.
[9].E. Omrani, H. Hasani, and S. H. Dibajian, "Multi-scaled modeling the mechanical properties of tubular composites reinforced with innovated 3D weft knitted spacer fabrics," Applied Composite Materials, vol. 25, no. 1, pp. 145-161, 2018.
[10].F. Stig and S. Hallström, "Effects of crimp and textile architecture on the stiffness and strength of composites with 3D reinforcement," Advances in Materials Science and Engineering, vol. 2019, 2019.
[11].S. Minapoor, S. Ajeli, and M. Salmani Tehrani, "Investigation into tensile strength of noncrimp three-dimensional orthogonal woven structure," Journal of Industrial Textiles, vol. 49, no. 2, pp. 200-218, 2019.
[12].S. Minapoor, S. Ajeli, and M. Salmani Tehrani, "Investigation into tensile strength of noncrimp P. Tan, L. Tong, G. Steven, and T. Ishikawa, "Behavior of 3D orthogonal woven CFRP composites. Part I. Experimental investigation," Composites Part A: Applied Science and Manufacturing, vol. 31, no. 3, pp. 259-271, 2000.
[13].M. Karahan, S. V. Lomov, A. E. Bogdanovich, D. Mungalov, and I. Verpoest, "Internal geometry evaluation of non-crimp 3D orthogonal woven carbon fabric composite," Composites Part A: Applied Science and Manufacturing, vol. 41, no. 9, pp. 1301-1311, 2010.
[14].M. Karahan, S. V. Lomov, A. E. Bogdanovich, and I. Verpoest, "Fatigue tensile behavior of carbon/epoxy composite reinforced with non-crimp 3D orthogonal woven fabric," Composites Science and Technology, vol. 71, no. 16, pp. 1961-1972, 2011.
[15].M. Wilkinson and M. Ruggles-Wrenn, "Fatigue of a 3D orthogonal non-crimp woven polymer matrix composite at elevated temperature," Applied Composite Materials, vol. 24, no. 6, pp. 1405-1424, 2017.
[16].H.R. Agaei,M.Varsei,S. Ajeli,M.Kamali Dolatabadi and M.S. Yazdanshenas, " Torsional behavior of non-crimp orthogonal woven composite using experimental and numerical methods," Journal of Industrial Textiles,First published8 Feb2022.
[17].S. Gürgen, "Numerical modeling of fabrics treated with multi-phase shear thickening fluids under high velocity impacts," Thin-Walled Structures, vol. 148, p. 106573, 2020.
[18].Y. Zhong, L. Q. N. Tran, U. Kureemun, and H. P. Lee, "Prediction of the mechanical behavior of flax polypropylene composites based on multi-scale finite element analysis," Journal of materials science, vol. 52, no. 9, pp. 4957-4967, 2017.
[19].N. Shekarchizadeh, R. Jafari Nedoushan, T. Dastan, and H. Hasani, "Experimental and numerical study on stiffness and damage of glass/epoxy biaxial weft-knitted reinforced composites," Journal of Reinforced Plastics and Composites, vol. 40, no. 1-2, pp. 70-83, 2021.
[20].M. Masoumi, S. B. Abdellahi, and S. M. Hejazi, "Investigation flexural behavior of hybrid-reinforced layered filament wound pipes using experimental tests and numerical model," Journal of Industrial Textiles, p. 15280837211034244, 2021.
[21].J. Zhai, T. Zeng, G.-d. Xu, Z.-h. Wang, S. Cheng, and D.-n. Fang, "A multi-scale finite element method for failure analysis of three-dimensional braided composite structures," Composites Part B: Engineering, vol. 110, pp. 476-486, 2017.
[22].Y. Zhao, L. Song, J. Li, and Y. Jiao, "Multi-scale finite element analyses of thermal conductivities of three dimensional woven composites," Applied Composite Materials, vol. 24, no. 6, pp, 2017.
[23].S. Minapoor, S. Ajeli, and M. Sheikhzadeh, "Evaluation of flexural modulus of carbon 3D orthogonal woven fabric using atrilinear model," Indian Journal of Fibre & Textile Research (IJFTR), vol. 43, no. 3, pp. 301-307, 2018.
[24].C. C. Chamis, "Mechanics of composite materials: past, present, and future," Journal of Composites, Technology and Research, vol. 11, no. 1, pp. 3-14, 1989.
)
