@article { author = {Shaikhzadeh Najar, Saeed and عترتی, سید محمد and hoseinpour, alireza and khatir, behnaz}, title = {The Effects of Take-Up Nozzle and Air-Jet Pressure on the Physical and Mechanical Properties of Rotor-Jet Cotton Yarns}, journal = {Journal of Textile Science and Technology}, volume = {6}, number = {3}, pages = {5-8}, year = {2017}, publisher = {Today Textile Institute}, issn = {2151-7162}, eissn = {2322-2417}, doi = {}, abstract = {In this research, the effects of take-up nozzle and air-jet pressure on the physical and mechanical properties of rotor-jet cotton yarns were investigated. Two types of take up nozzle namely Soft, 4-grooved were used and an air-jet nozzle (90Z) was installed on a rotor spinning machine while air pressure was adjusted in the range of 0.2-1.2 (bar). Finally 12 samples of rotor-jet spun yarns and one sample of rotor spun yarn with linear density of 20 (Tex) and Nominal twist of 943 TPM were produced. The results were then statistically analyzed by IBM SPSS Statistics 20.The results show that by using of air-jet nozzle in rotor spinning, twist, abrasion resistance, and hairiness of produced yarns were increased while yarn irregularity changes was in-significant compared to normal rotor yarn. However, by using of soft and 4-grooved nozzles, tensile strength of produced yarns especially at air pressure of 0.4 and 0.6 bar were increased.}, keywords = {"Rotor Spinning","Air-Jet Nozzle","Take-up Nozzle","Air Pressure"}, title_fa = {اثر فشار هوای جت و نوع نازل برداشت بر خواص فیزیکی و مکانیکی نخ های روتور- جت پنبه ای}, abstract_fa = {برای بررسی اثر فشار هوای جت و نوع نازل برداشت بر خواص فیزیکی و مکانیکی نخ های روتور- جت پنبه ای، دو نوع نازل برداشتصاف و چهارشیار انتخاب و پس از نصب نازل جت هوا روی ماشین ریسندگی چرخانه ای، فشار هوا در محدوده 0/2-1/2 barبا بازه0/2تغییر داده شد. در نهایت، 12نمونه نخ روتور-جت و یک نمونه نخ چرخانه ای معمولی با نمره 20texو با تاب در متر اسمی 943تولید شد. سپس تغییرات نمره، تاب، پرز، مقاومت سایشی، نایکنواختی، استحکام و ازدیاد طول نخ ها بررسی شد. نتایج تمام آزمون هابا نرم افزار IBM SPSS Statistics 20تجزیه و تحلیل آماری شد. نتایج نشان می دهد، استفاده از نازل جت هوا سبب افزایش تاب درمتر، مقاومت سایشی و پرز نخ ها شده است، ولی در نایکنواختی نخ ها تغییری حاصل نشد. به طورکلی استفاده از نازل جت هوا با هر دونازل برداشت، سبب افزایش استحکام در مقایسه با نخ چرخانه ای شده است.}, keywords_fa = {"نازل جت هوا","نازل برداشت"," فشار هوا ","ریسندگی چرخانه ای","نخ روتور-جت"}, url = {https://www.jtst.ir/article_57945.html}, eprint = {https://www.jtst.ir/article_57945_98051587c955500416b404dd11b0908c.pdf} }