@article { author = {tavangarrizi, fatemeh and Abghari, Ramin and Mirjalili, Mohammad and amiri, hamirreza}, title = {Application of Response Surface Methodology and FEM in Optimization Fabric Bagging Deformation in Stenter Machine}, journal = {Journal of Textile Science and Technology}, volume = {9}, number = {1}, pages = {71-90}, year = {2020}, publisher = {Today Textile Institute}, issn = {2151-7162}, eissn = {2322-2417}, doi = {}, abstract = {In the stenter-finishing process changed the mechanical and chemical construction of the fabric, and causes the necessary characteristics to be given to the fabric for the final use of the garment. In the present study, by applying the simulated laboratory conditions as well as the simulation of the finite element method, the mechanical properties of the fabric in the stenter machine have been optimized. Initially, popular laboratory experiments were performed on six general worsted samples after that by changing stenter condition the effect of temperature (due to two factors of tension and speed), fiber percentage and fabric weight evaluated with experimental design (DOE) method using Minitab Software. Then, with Central Composite Design method, the mechanical properties of tensile strength and bagging deformation force were optimized. The results showed that temperature, material type and weight at the statistical level (sig.<0.001) significant on the strength and bagging deformation force. Then, by designing in TexGen software and transferring the design to Abaqus software, the experimental results of bagging deformation force were simulated with finite element method. The relationship between the results and the simulated conditions has a coefficient of determination of R2 = 0.98 (sig. <0.001), which can be suitable for simulation in stenter processes.}, keywords = {Stenter,Central composite design,ABAQUS,TexGen,Bagging}, title_fa = {کاربرد روش رویه پاسخ و المان محدود در بهینه سازی کاسه‌انداختن پارچه در ماشین استنتر}, abstract_fa = {استنتر در فرآیند تکمیل بااصلاح ساختمان فیزیکی-مکانیکی و شیمیایی پارچه سبب می‌شود تا خصوصیات لازم برای مورد مصرف نهایی لباس به پارچه داده شود. در تحقیق حاضر با اعمال شرایط شبیه‌سازی شده آزمایشگاهی و همچنین شبیه‌سازی از روش المان محدود بهینه‌سازی خواص مکانیکی پارچه در ماشین استنتر صورت گرفته است. در ابتدا با استفاده از دستگاه استنتر آزمایشگاهی آزمایش‌ها بر شش نمونه فاستونی (با شرایط مشابه تولید) با تغییر تاثیر دما ( ناشی از دو فاکتور کشش و سرعت)، درصد الیاف و وزن پارچه با استفاده از روش طراحی آزمایش به کمک نرم‌افزار مینی تب غربالگری گردید سپس با استفاده روش طراحی مرکب مرکزی خواص مکانیکی استحکام تاری و کاسه‌انداختن بهینه‌سازی شد، نتایج نشان داد دما، جنس ماده و وزن در سطح آماری (001/0 sig.<) بر استحکام و تغییر فرم کاسه‌‌انداختن موثر است. سپس با طراحی در نرم‌افزار تکس‌چن و انتقال طرح به نرم‌افزار آباکوس از طریق روش حل عددی المان محدود نتایج آزمایشی کاسه‌انداختن شبیه‌سازی گردید. ارتباط میان نتایج با شرایط شبیه‌سازی شده دارای ضریب تعیین 98/0 =R2 (001/0 sig.<) می‌باشد که می‌تواند برای شبیه‌سازی در فرآیندهای تکمیل با استنتر مناسب باشد.}, keywords_fa = {استنتر,طراحی مرکب مرکزی,آباکوس,تکس‌جن,کاسه‌انداختن}, url = {https://www.jtst.ir/article_135161.html}, eprint = {https://www.jtst.ir/article_135161_dac4c7d3b0f9ed20ed9b15188952d990.pdf} }