[1] N. Rafizadeh Zaeem and K. Karami, "An Investigation on Blood Barrier and Antibacterial Properties of Fluorocarbon and Gentamicin Coated Textiles," Applied Nanomaterials and Smart Polymers, vol. 1, pp. 1-11, 2023.
[2]R. Khajavi, N. Rafizadeh Zaeem, Z. Assgharpour, and M. K. Rahimi, "Polypropylene non-woven coating with lipid/carboxymethyl cellulose/nanosilver nanomulsion for wound dressese application," Journal of Textile Science and Technology, vol. 6, pp. 23-29, 2017.
[3] M. Abbasipour, M. Mirjalili, R. Khajavi, and M. M. Majidi, "Coated cotton gauze with Ag/ZnO/chitosan nanocomposite as a modern wound dressing," Journal of Engineered Fibers and Fabrics, vol. 9, p. 155892501400900114, 2014.
[4] M. Ahrari, R. Khajavi, M. K. Dolatabadi, T. Toliyat, and A. Rashidi, "A review on application of phase change materials in textiles finishing," International Journal of Materials and Metallurgical Engineering, vol. 11, pp. 400-405, 2017.
[5] A. Berendjchi, R. Khajavi, A. A. Yousefi, and M. E. Yazdanshenas, "Improved continuity of reduced graphene oxide on polyester fabric by use of polypyrrole to achieve a highly electro-conductive and flexible substrate," Applied Surface Science, vol. 363, pp. 264-272, 2016.
[6] N. Goddard, R. Kemp, and R. Lane, "An overview of smart technology," Packaging Technology and Science: An International Journal, vol. 10, pp. 129-143, 1997.
[7] J. A. Harvey, "Smart materials," M. KUTZ, Hg. Handbook of Materials Selection. New York (USA): John Wiley & Sons, Inc, pp. 401-418, 2002.
[8] C. M. Hussain and P. Di Sia, Handbook of smart materials, technologies, and devices: applications of industry 4.0: Springer Nature, 2022.
[9] L. Berglin, "Interactive Textile Structures Creating Multifunctional Textiles based on Smart Materials [Electronic resource]," PhD Thesis/LTH Berglin.–Gothenburg, Sweden: Department of Computer Science ….
[10] M. Abbasipour and R. Khajavi, "Electrospun Nanofibers for Energy Harvesting," in Electrospun Nanofibers: Principles, Technology and Novel Applications, ed: Springer, 2022, pp. 721-736.
[11] M. Addington and D. Schodek, "Smart materials and new technologies. Burlington, MA," ed: USA: Elsevier, 2005.
[12] I. N. Qader, K. Mediha, F. Dagdelen, and Y. AYDOĞDU, "A review of smart materials: researches and applications," El-Cezeri, vol. 6, pp. 755-788, 2019.
[13] N. Chamankar, R. Khajavi, A. A. Yousefi, A. Rashidi, and F. Golestanifard, "A flexible piezoelectric pressure sensor based on PVDF nanocomposite fibers doped with PZT particles for energy harvesting applications," Ceramics International, vol. 46, pp. 19669-19681, 2020.
[14] T. A. Khattab and M. S. Abdelrahman, "From smart materials to chromic textiles," Advances in functional finishing of textiles, pp. 257-274, 2020.
[15] R. Christie, "Chromic materials for technical textile applications," in Advances in the dyeing and finishing of technical textiles, ed: Elsevier, 2013, pp. 3-36.
[16] M. Viková, "Type of chromic materials," in Chromic Materials, ed: Apple Academic Press, 2018, pp. 53-126.
[17] Y. Yang, M. Li, and S. Fu, "Screen-printed photochromic textiles with high fastness prepared by self-adhesive polymer latex particles," Progress in Organic Coatings, vol. 158, p. 106348, 2021.
[18] J. Zhang, Q. Zou, and H. Tian, "Photochromic materials: more than meets the eye," Advanced Materials, vol. 25, pp. 378-399, 2013.
[19] A. P. Periyasamy, M. Vikova, and M. Vik, "A review of photochromism in textiles and its measurement," Textile Progress, vol. 49, pp. 53-136, 2017.
[20] T. Cheng, T. Lin, J. Fang, and R. Brady, "Photochromic wool fabrics from a hybrid silica coating," Textile Research Journal, vol. 77, pp. 923-928, 2007.
[21] Z. He, B. Bao, J. Fan, W. Wang, and D. Yu, "Photochromic cotton fabric based on microcapsule technology with anti-fouling properties," Colloids and Surfaces A: Physicochemical and Engineering Aspects, vol. 594, p. 124661, 2020.
[22] E. Refaat, M. Mohamed, A. Youssif, S. Ali, A. Fathallah, D. Maamoun, et al., "Uv protection and water repellent finishing of polyester fabric printed with photochromic dyes," Journal of Textiles, Coloration and Polymer Science, 2023.
[23] A. Hakami, S. S. Srinivasan, P. K. Biswas, A. Krishnegowda, S. L. Wallen, and E. K. Stefanakos, "Review on thermochromic materials: development, characterization, and applications," Journal of Coatings Technology and Research, vol. 19, pp. 377-402, 2022.
[24] X. Ji, W. Liu, Y. Yin, C. Wang, and F. Torrisi, "A graphene-based electro-thermochromic textile display," Journal of Materials Chemistry C, vol. 8, pp. 15788-15794, 2020.
[25] S. Khamseh and M. Sadeghi Kiakhani, "Application of Emerging Technologies using for Fabrication of Smart Surfaces on Textiles," Journal of Textile Science and Technology, vol. 7, pp. 29-38, 2018.
[26] A. Dybko, W. Wroblewski, E. Roźniecka, J. Maciejewski, and Z. Brzozka, "Comparison of two thermochromic solutions for fibre optic temperature probes," Sensors and Actuators A: Physical, vol. 76, pp. 203-207, 1999.
[27] I. S. Lopez, A. L. Mendonça, M. Fernandes, V. de Zea Bermudez, J. Morgado, G. Del Pozo, et al., "Europium complex-based thermochromic sensor for integration in plastic optical fibres," Optical Materials, vol. 34, pp. 1447-1450, 2012.
[28] C. Fernández-Valdivielso, I. Matıas, and F. Arregui, "Simultaneous measurement of strain and temperature using a fiber Bragg grating and a thermochromic material," Sensors and Actuators A: Physical, vol. 101, pp. 107-116, 2002.
[29] D. Xue and T. Zhao, "The electrothermal color-changing fabric based on high-sensitivity thermochromic microcapsules," Colloids and Surfaces A: Physicochemical and Engineering Aspects, vol. 678, p. 132458, 2023.
[30] C. Calvino, L. Neumann, C. Weder, and S. Schrettl, "Approaches to polymeric mechanochromic materials," Journal of Polymer Science Part A: Polymer Chemistry, vol. 55, pp. 640-652, 2017.
[31] Z. Wang and R. Liu, "PEDOT: PSS-based electrochromic materials for flexible and stretchable devices," Materials Today Electronics, vol. 4, p. 100036, 2023.
[32] M. Gicevicius, I. A. Cechanaviciute, and A. Ramanavicius, "Electrochromic textile composites based on polyaniline-coated metallized conductive fabrics," Journal of the electrochemical society, vol. 167, p. 155515, 2020.
[33] P. Yang, P. Sun, and W. Mai, "Electrochromic energy storage devices," Materials today, vol. 19, pp. 394-402, 2016.
[34] S. Sinha, R. Daniels, O. Yassin, M. Baczkowski, M. Tefferi, A. Deshmukh, et al., "Electrochromic fabric displays from a robust, open‐air fabrication technique," Advanced Materials Technologies, vol. 7, p. 2100548, 2022.
[35] S. Raoux, "Phase change materials," Annual Review of Materials Research, vol. 39, pp. 25-48, 2009.
[36] S. Raoux, F. Xiong, M. Wuttig, and E. Pop, "Phase change materials and phase change memory," MRS bulletin, vol. 39, pp. 703-710, 2014.
[37] X. Tao, Smart fibres, fabrics and clothing: fundamentals and applications: Elsevier, 2001.
[38] S. Mondal, "Phase change materials for smart textiles–An overview," Applied thermal engineering, vol. 28, pp. 1536-1550, 2008.
[39] F. Salaün, "Phase change materials for textile application," Textile Industry and Environment, pp. 1-27, 2019.
[40] A. Berendjchi, R. Khajavi, A. A. Yousefi, and M. E. Yazdanshenas, "Surface characteristics of coated polyester fabric with reduced graphene oxide and polypyrrole," Applied Surface Science, vol. 367, pp. 36-42, 2016.
[41] I.-A. Pavel, S. Lakard, and B. Lakard, "Flexible sensors based on conductive polymers," Chemosensors, vol. 10, p. 97, 2022.
[42] C. Cochrane, V. Koncar, M. Lewandowski, and C. Dufour, "Design and development of a flexible strain sensor for textile structures based on a conductive polymer composite," Sensors, vol. 7, pp. 473-492, 2007.
[43] S. Golabzaei, R. Khajavi, H. A. Shayanfar, M. E. Yazdanshenas, and N. Talebi, "Fabrication and characterization of a flexible capacitive sensor on PET fabric," International Journal of Clothing Science and Technology, vol. 30, pp. 687-697, 2018.
[44] E. Hakansson, A. Kaynak, T. Lin, S. Nahavandi, T. Jones, and E. Hu, "Characterization of conducting polymer coated synthetic fabrics for heat generation," Synthetic Metals, vol. 144, pp. 21-28, 2004.
[45] J. Wu, D. Zhou, C. O. Too, and G. G. Wallace, "Conducting polymer coated lycra," Synthetic Metals, vol. 155, pp. 698-701, 2005.
[46] M. Addington, "Smart Materials and Sustainability," Austin: Center for Sustainable Development-The University of Texas at Austin, 2010.
[47] J. Uchida, B. Soberats, M. Gupta, and T. Kato, "Advanced functional liquid crystals," Advanced Materials, vol. 34, p. 2109063, 2022.
[48] B. Bahadur, Liquid Crystal-Applications And Uses (Volume 1) vol. 1: World scientific, 1990.
[49] S. Mathews, G. Farrell, and Y. Semenova, "All-fiber polarimetric electric field sensing using liquid crystal infiltrated photonic crystal fibers," Sensors and Actuators A: Physical, vol. 167, pp. 54-59, 2011.
[50] M. K. Singh, "Flexible photovoltaic textiles for smart applications," Sol. Cells New Asp. Solut, pp. 43-68, 2011.
[51] F. Ye, S. Dong, Z. Tian, S. Yao, Z. Zhou, and S. Wang, "Fabrication of the PLA/Sr2MgSi2O7: Eu2+, Dy3+ long-persistent luminescence composite fibers by electrospinning," Optical Materials, vol. 36, pp. 463-466, 2013.
[52] F. Ye, S. Dong, Z. Tian, S. Yao, Z. Zhou, and S. Wang, "Fabrication and characterization of long-persistent luminescence/polymer (Ca2MgSi2O7: Eu2+, Dy3+/PLA) composite fibers by electrospinning," Optical Materials, vol. 45, pp. 64-68, 2015.
[53] N. Santos, A. Fernandes, L. Alves, N. Sobolev, E. Alves, K. Lorenz, et al., "Microprobe analysis, iono-and photo-luminescence of Mn2+ activated ZnGa2O4 fibres," Nuclear Instruments and Methods in Physics Research Section B: Beam Interactions with Materials and Atoms, vol. 306, pp. 195-200, 2013.
[54] A. Kir’yanov, V. Minkovich, Y. O. Barmenkov, M. M. Gamez, and A. Martinez-Rios, "Multi-wavelength visible up-converted luminescence in novel heavily doped Ytterbium–Holmium silica fiber under low-power IR diode pumping," Journal of luminescence, vol. 111, pp. 1-8, 2005.
[55] C. A. Kelly, C. Toncelli, J. P. Kerry, and D. B. Papkovsky, "Discrete O2 sensors produced by a spotting method on polyolefin fabric substrates," Sensors and Actuators B: Chemical, vol. 203, pp. 935-940, 2014.
[56] A. M. C. Santos, M. Mohammadi, and S. Afshar, "Investigation of a fibre-coupled beryllium oxide (BeO) ceramic luminescence dosimetry system," Radiation measurements, vol. 70, pp. 52-58, 2014.
[57] F. Klein, S. Greilich, C. E. Andersen, L. R. Lindvold, and O. Jäkel, "A thin layer fiber-coupled luminescence dosimeter based on Al2O3: C," Radiation measurements, vol. 46, pp. 1607-1609, 2011.
[58] J. Dı́az-Garcı́a, J. M. Costa-Fernández, N. Bordel-Garcı́a, and A. Sanz-Medel, "Room-temperature phosphorescence fiber-optic instrumentation for simultaneous multiposition analysis of dissolved oxygen," Analytica chimica acta, vol. 429, pp. 55-64, 2001.
[59] M. de Vos, R. Torah, S. Beeby, and J. Tudor, "Functional electronic screen-printing–electroluminescent lamps on fabric," Procedia Engineering, vol. 87, pp. 1513-1516, 2014.
[60] L. I. Berger, Semiconductor materials: CRC press, 2020.
[61] A. Chaves, J. G. Azadani, H. Alsalman, D. Da Costa, R. Frisenda, A. Chaves, et al., "Bandgap engineering of two-dimensional semiconductor materials," npj 2D Materials and Applications, vol. 4, p. 29, 2020.
[62] Z. Mao, W. Wang, Y. Liu, L. Zhang, H. Xu, and Y. Zhong, "Infrared stealth property based on semiconductor (M)-to-metallic (R) phase transition characteristics of W-doped VO2 thin films coated on cotton fabrics," Thin solid films, vol. 558, pp. 208-214, 2014.
[63] X. Huang, D. Ji, H. Fuchs, W. Hu, and T. Li, "Recent progress in organic phototransistors: Semiconductor materials, device structures and optoelectronic applications," ChemPhotoChem, vol. 4, pp. 9-38, 2020.
[64] D. K. Schroder, Semiconductor material and device characterization: John Wiley & Sons, 2015.
[65] M. P. Paranthaman, W. Wong-Ng, and R. N. Bhattacharya, Semiconductor materials for solar photovoltaic cells vol. 218: Springer, 2016.
[66] A. Ehrmann and T. Blachowicz, "Recent coating materials for textile-based solar cells," AIMS Materials Science, vol. 6, 2019.
[67] W. Kylberg, F. A. De Castro, P. Chabrecek, U. Sonderegger, B. T. T. Chu, F. Nüesch, et al., "Woven electrodes for flexible organic photovoltaic cells," Advanced Materials, vol. 23, pp. 1015-1019, 2011.
[68] R. González and N. J. Pinto, "Electrospun poly (3-hexylthiophene-2, 5-diyl) fiber field effect transistor," Synthetic Metals, vol. 151, pp. 275-278, 2005.
[69] H. Castro, E. Sowade, J. Rocha, P. Alpuim, A. Machado, R. Baumann, et al., "Degradation of all-inkjet-printed organic thin-film transistors with TIPS-pentacene under processes applied in textile manufacturing," Organic Electronics, vol. 22, pp. 12-19, 2015.
[70] D. Wang, Y. Su, D. Chen, L. Wang, X. Xiang, and D. Zhu, "Preparation and characterization of poly (3-octylthiophene)/carbon fiber thermoelectric composite materials," Composites Part B: Engineering, vol. 69, pp. 467-471, 2015.
[71] P. Dineva, D. Gross, R. Müller, T. Rangelov, P. Dineva, D. Gross, et al., Piezoelectric materials: Springer, 2014.
[72] M. Abbasipour, R. Khajavi, and A. H. Akbarzadeh, "A comprehensive review on piezoelectric polymeric and ceramic nanogenerators," Advanced Engineering Materials, vol. 24, p. 2101312, 2022.
[73] N. Chamankar, R. Khajavi, A. Yousefy, A. Rashidi, and F. Golestanifard, "PZT ELECTROSPUN NANOFIBERS FOR ENERGY HARVESTING STRATEGIES."
[74] M. Habib, I. Lantgios, and K. Hornbostel, "A review of ceramic, polymer and composite piezoelectric materials," Journal of Physics D: Applied Physics, 2022.
[75] N. Chamankar, R. Khajavi, A. A. Yousefi, A. s. Rashidi, and F. Golestanifard, "Comparing the piezo, pyro and dielectric properties of PZT particles synthesized by sol–gel and electrospinning methods," Journal of Materials Science: Materials in Electronics, vol. 30, pp. 8721-8735, 2019.
[76] M. Abbasipour, R. Khajavi, A. A. Yousefi, M. E. Yazdanshenas, and F. Razaghian, "The piezoelectric response of electrospun PVDF nanofibers with graphene oxide, graphene, and halloysite nanofillers: a comparative study," Journal of Materials Science: Materials in Electronics, vol. 28, pp. 15942-15952, 2017.
[77] R. Khajavi and M. Abbasipour, "Piezoelectric PVDF polymeric films and fibers: polymorphisms, measurements, and applications," Industrial applications for intelligent polymers and coatings, pp. 313-336, 2016.
[78] M. C. Sekhar, E. Veena, N. S. Kumar, K. C. B. Naidu, A. Mallikarjuna, and D. B. Basha, "A review on piezoelectric materials and their applications," Crystal Research and Technology, vol. 58, p. 2200130, 2023.
[79] M. Abbasipour, R. Khajavi, A. A. Yousefi, M. E. Yazdanshenas, F. Razaghian, and A. Akbarzadeh, "Improving piezoelectric and pyroelectric properties of electrospun PVDF nanofibers using nanofillers for energy harvesting application," Polymers for Advanced Technologies, vol. 30, pp. 279-291, 2019.
[80] E. Nilsson, A. Lund, C. Jonasson, C. Johansson, and B. Hagström, "Poling and characterization of piezoelectric polymer fibers for use in textile sensors," Sensors and Actuators A: Physical, vol. 201, pp. 477-486, 2013.
[81] E. Nilsson, L. Mateu, P. Spies, and B. Hagström, "Energy harvesting from piezoelectric textile fibers," Procedia Engineering, vol. 87, pp. 1569-1572, 2014.
[82] H. P. Konka, M. Wahab, and K. Lian, "Piezoelectric fiber composite transducers for health monitoring in composite structures," Sensors and Actuators A: Physical, vol. 194, pp. 84-94, 2013.
[83] A. Dolay, C. Courtois, S. d’Astorg, M. Rguiti, J.-L. Petitniot, and A. Leriche, "Fabrication and characterization of metal core piezoelectric fibres by dip coating process," Journal of the European Ceramic Society, vol. 34, pp. 2951-2957, 2014.
[84] D. G. Dassanayaka, T. M. Alves, N. D. Wanasekara, I. G. Dharmasena, and J. Ventura, "Recent progresses in wearable triboelectric nanogenerators," Advanced Functional Materials, vol. 32, p. 2205438, 2022.
[85] F. Karimdehnavi, A. Valipouri, and A. Karimian, "Evaluating the Triboelectric Performance of wearable Textiles in the conversion of Mechanical Energy to Electrical Energy," Journal of Textile Science and Technology, vol. 9, pp. 51-57, 2020.
[86] M. Zhang, T. Gao, J. Wang, J. Liao, Y. Qiu, Q. Yang, et al., "A hybrid fibers based wearable fabric piezoelectric nanogenerator for energy harvesting application," Nano Energy, vol. 13, pp. 298-305, 2015.
[87] C. Liu, W. Zhang, J. Sun, J. Wen, Q. Yang, H. Cuo, et al., "Piezoelectric nanogenerator based on a flexible carbon-fiber/ZnO–ZnSe bilayer structure wire," Applied surface science, vol. 322, pp. 95-100, 2014.
[88] X. Ruan, A. Safari, and T.-W. Chou, "Effective elastic, piezoelectric and dielectric properties of braided fabric composites," Composites Part A: Applied Science and Manufacturing, vol. 30, pp. 1435-1444, 1999.
[89] M. Kechiche, F. Bauer, O. Harzallah, and J.-Y. Drean, "Development of piezoelectric coaxial filament sensors P (VDF-TrFE)/copper for textile structure instrumentation," Sensors and Actuators A: Physical, vol. 204, pp. 122-130, 2013.
[90] G. Bartkowiak, A. Dąbrowska, and A. Greszta, "Development of smart textile materials with shape memory alloys for application in protective clothing," Materials, vol. 13, p. 689, 2020.
[91] C.-F. Chen, R.-T. Zheng, T.-T. Kung, C.-N. Shauo, and H.-J. Shy, "A strain-fiber actuator by use of shape memory alloy spring," Optik, vol. 120, pp. 818-823, 2009.
[92] J. Raghavan, T. Bartkiewicz, S. Boyko, M. Kupriyanov, N. Rajapakse, and B. Yu, "Damping, tensile, and impact properties of superelastic shape memory alloy (SMA) fiber-reinforced polymer composites," Composites Part B: Engineering, vol. 41, pp. 214-222, 2010.
[93] J. Leng, X. Lan, and S. Du, "Shape-memory polymer composites," Shape-Memory Polymers and Multifunctional Composites, p. 203, 2010.
[94] G. Li and P. Zhang, "A self-healing particulate composite reinforced with strain hardened short shape memory polymer fibers," Polymer, vol. 54, pp. 5075-5086, 2013.
[95] G. Li, O. Ajisafe, and H. Meng, "Effect of strain hardening of shape memory polymer fibers on healing efficiency of thermosetting polymer composites," Polymer, vol. 54, pp. 920-928, 2013.
[96] S. Mondal, J. Hu, Z. Yang, Y. Liu, and Y.-s. Szeto, "Shape memory polyurethane for smart garment," Research Journal of Textile and Apparel, vol. 6, pp. 75-83, 2002.