per
موسسه نساجی امروز
علوم و فناوری نساجی و پوشاک
2151-7162
2322-2417
2014-06-01
4
1
3
10
6465
Research/ Original/ Regular Article
اثر عمل آوری با پلاسما بر شکل شناسی و مقاومت الکتریکی پارچههای پلیاستر لایهنشانی شده با نانوذرات مس
Plasma Treatment and its Effect on Morphology and Electrical Resistance of Polyester Copper Nanoparticles Electroless Plated Fabrics
وحید متقی طلب
motaghitalab@guilan.ac.ir
1
فاطمه حقدوست
fatemeh_haghdoost@yahoo.com
2
فاطمه محترم
fatememohtaram@yahoo.com
3
هیئت علمی دانشگاه گیلان
دانشگاه گیلان
دانشگاه گیلان
عملآوری با پلاسما روشی اقتصادی و سریع برای اصلاح و تغییر سطح پارچه در ابعاد میکروسکوپی بدون استفاده از رو شهای شیمیایی است. در این پژوهش، اثر پلاسمای هوا و آبکافت شیمیایی بر آمادهسازی پارچه پلیاستر و شکلشناسی سطح مدنظر برای ایجاد مکانهای قابل جذب در سطح پارچه پلیاستر با میکروسکوپ الکترونی پویشی بررسی شد. روش لایهنشانی به کار برده شده در این مقاله لایهنشانی نانوذرات فلز مس بدون استفاده از جریان الکتریکی و استفاده از مواد کاهنده برای کاهش شیمیایی یون فلزی است. مقاومت الکتریکی پارچه پلیاستر با مولتیمتر رقمی بررسی شد. نتایج بهدست آمده نشان داد، عملآوری با پلاسما منجر به افزایش پراکنش و نفوذ نانوذرات مس و رسانایی الکتریکی زیاد و یکنواخت منسوج، در مقایسه با روش آبکافت شیمیایی میشود. نتایج بهدست آمده از مولتیمتر رقمی نشان دهنده کاهش مقاومت الکتریکی از 1/2 Ω/cm2 به 0/2 Ω/cm2 در روش پلاسماست. همچنین، افزایش مدت زمان عملآوری با پلاسما منجر به پوششدهی بیشتر و یکنواخت سطح پارچه با نانوذرات فلز مس شد. ذرات پوشش داده شده به روش آبکافت شیمیایی با اندازه متوسط بیش از 500 nm هستند که در مقایسه با روش عملآوری با پلاسما اندازه ذرات فلز مس کوچکتر از 100 nm است.
https://www.jtst.ir/article_6465_99e48676ec0f8eea44279b3c9a8da368.pdf
عمل آوری با پلاسما
پارچه پلی استر
هیدرولیز شیمیایی
نانوذرات مس
هدایت الکتریکی
Plasma treatment
polyester fabric
Chemical hydrolysis
Copper nanoparticle
conductivity
per
موسسه نساجی امروز
علوم و فناوری نساجی و پوشاک
2151-7162
2322-2417
2014-06-01
4
1
11
17
6466
Research/ Original/ Regular Article
تهیه الیاف ویسکوز به روش عملآوری خمیر چوب با پرتودهی الکترونی
Preparation of Viscose Fibers by Treatment of Wood Pulp Using Electron Beam Irradiation
میترا توکلی اردکانی
mtavakoli@yazd.ac.ir
1
سکینه کریمی
sakinehkarimi34@yahoo.com
2
محمد میرجلیلی
dr.m.mirjalili@iauyazd.ac.ir
3
عضو هیات علمی/دانشگاه یزد
مدرس حق التدریس
عضو هیئت علمی دانشگاه ازاد یزد
در فرایند مرسوم تولید الیاف ویسکوز در صنعت، برای کاهش درجه پلیمر شدن سلولوز در مرحله پیرسازی از محلول قلیایی سود سوزآور و کربندیسولفید با غلظت زیاد طی مدت زمان طولانی استفاده میشود. در این پژوهش، سعی شده با استفاده از عملآوری خمیر چوب با تابش پرتوهای الکترونی، درجه پلیمرشدن سلولوز کاهش یابد. در این شرایط، ماده پرتودهی شده میتواند در غلظت کمتر محلول سود سوزآور و کربندیسولفید حل شود. بنابراین، استفاده از پرتودهی الکترونی باعث کوتا هشدن فرایند تولید، کنترل بیشتر درجه پلیمرشدن، کاهش قابل توجه مصرف مواد شیمیایی و درنهایت کاهش آلودگی زیستمحیطی میشود. بنابراین برای مقایسه، نمونههایی به روش مرسوم در صنعت و عملآوری الکترونی خمیر چوب با دزهای پرتودهی 5،10 و 15 kGy تهیه شدند. نمونههای تهیه شده با آزمونهای جذب رنگ، انحلالپذیری، طیفسنجی زیرقرمز، میکروسکوپی الکترونی پویشی (SEM) گرماسنجی پویشی تفاضلی(DSC) و کشش بررسی شدند. نتایج حاصل نشان داد، نمونه عملآوری شده با دز پرتودهی 15 kGy بیشترین مقدار انحلالپذیری، همچنین مقدر جذب رطوبت و جذب رنگ را نسبت به سایر نمونهها داشته است. تصاویر SEM نمونهها، نمایانگر ساختاری خطدار در وجه طولی بوده که نشاندهنده ساختاری منظم و سطح مقطع برجسته )مضرس( الیافاند. نتایج آزمون DSC نشان داد، نمونه عملآوری شده با دز 15 kGy بیشترین آنتالپی تبخیر را داشته که در توافق با نتایج آزمون جذب رطوبت و جذب رنگ است. همچنین، بیشتر بودن دمای تخریب آن نشاندهنده پایداری گرمایی بیشتر این نمونه است. بیشترین مقدار استحکام به نمونه عملآوری شده با دز 15 kGy مربوط بوده، در حالیکه نسبت به روش مرسوم % 10 کاهش داشته است.
The conventional process for the production of viscose fibers in reducing the degree of polymerization of cellulose in the stage of ageing is to use alkaline solution of caustic soda and high concentrations of carbon disulfide over a long period of time. In this study, attempts have been made to treat wood pulp by electron beam irradiation so to reduce the degree of polymerization of cellulose. In such cases, the irradiated material may be dissolved in lower alkaline and carbon disulfide concentrations. Thus, treatment by electron irradiation may shorten the manufacturing process, more control on the degree of polymerization and a significant reduction in the consumption of chemicals and at the end to reduce environmental pollution. For comparison, the samples were prepared by conventional processing methods practiced in industry and electron beam treatment with irradiation dose of 5, 10 and 15 kGy. The prepared samples were characterized by water and dye absorption tests, solubility tests, Fourier transform infrared(FTIR) spectroscopy, scanning electron microscopy )SEM(, differential scanning calorimeter (DSC) and tensile properties. The results indicated that, an irradiated sample with 15 kGy dose exhibits maximum solubility, moisture and dye uptake. SEM results indicated a striated structure in the longitudinal and regular structural fibers and ridged cross sections. The results of DSC indicated the highest enthalpy of vaporization in the irradiated sample with 15 kGy dose that was in agreement with the results of water and dye absorptions. A high degradation temperature of the irradiated sample with 15 kGy dose revealed its high thermal stability. However, the irradiated sample with 15 kGy dose displayed maximum tensile strength but a decrease in 10% compared to a sample prepared by conventional process.
https://www.jtst.ir/article_6466_abb25fd14a2a7299f2fff92d0794cc50.pdf
"پرتوهای الکترونی"
"عملآوری خمیرچوب"
"درجه پلیمریزاسیون"
"الیاف ویسکوز"
"پیرسازی"
"Electron Beams"
"Treatment wood pulp"
" Degree of polymerization"
"Viscose fiber"
" Agging"
per
موسسه نساجی امروز
علوم و فناوری نساجی و پوشاک
2151-7162
2322-2417
2014-06-01
4
1
43
55
6470
Review Article
مروری بر خواص و کاربردهای پزشکی نانوالیاف الکتروریسیشده حاصل از کیتوسان
Properties and Medical Applications of Electrospun Chitosan Nanofibers: A Review
دکتر سیما حبیبی
s.habibi@iausr.ac.ir
1
مژگان رزاق پور
razaghpoor.m@gmail.com
2
محمدرضا اله قلی قصری
ghasri_mr@yahoo.com
3
حسین نازک دست
nazdast@aut.ac.ir
4
عضو هیات علمی دانشگاه آزاد اسلامی واحد یادگار امام (ره)
دانشگاه آزاد اسلامی واحد یادگار امام (ره)
عضو هیات علمی دانشگاه آزاد اسلامی واحد یادگار امام (ره)
عضو هیات علمی دانشکده مهندسی پلیمر، دانشگاه صنعتی امیرکبیر
کیتوسان پلیمر طبیعی است که به دلیل زیستسازگاری، زیستتخریبپذیری و سمی نبودن قابلیت کاربرد را در حوزههای مختلفی از جمله صنایع پزشکی، داروسازی و تصفیه پسابهای صنعتی دارد. با توجه به امکان الکتروریسی این پلیمر، پژوهشهای بسیاری با محوریت نانوالیاف کیتوسان انجام شده است. نانوالیاف پلیمری به دلیل ویژگیهایی چون ظرافت و نسبت سطح به حجم و تخلخل زیاد، قابلیت تشکیل شبکه سهبعدی و داشتن خواص مکانیکی و زیستی مطلوب دامنه کاربرد گستردهای دارند. هرچند که الکتروریسی کیتوسان با مشکلات ویژهای روبهروست، پژوهشها نشان میدهد، تبدیل کیتوسان به مشتقات با انحلالپذیری بیشتر، اختلاط آن با سایر پلیمرها و استفاده از حلالهای ویژه روشهایی برای سهولت الکتروریسی آن است. با توجه به این مهم در مقاله حاضر خواص کیتوسان و نانوالیاف الکتروریسی شده آن مرور شده است. همچنین، به برخی از کاربردهای نانوالیاف کیتوسان در صنعت پزشکی بهویژه در زمینه داربستهای مهندسی بافت و زخمپوشها اشاره شده است.
Chitosan is a natural abundant polymer which has attracted huge interests in biomedical, biological, pharmaceutical and wastewater treatment industries due to its biocompatible, biodegradable and nontoxicity properties. Considering that chitosan can be electrospun, many research works are focused in this area. Polymeric nanofibers, as one of the most known nanotechnology products, have huge potential applications in many fields due to their high aspect ratio and porosity, capable of forming three-dimensional structures and having great mechanical and biological properties. However there are some problems during electrospinning of chitosan which can be solved by using soluble chitosan derivatives, special solvents) mixture of organic acids (and blend it with other polymers. Considering the above matters, this review surveys the various approaches for investigation of chitosan properties and its successful electrospinning efficiency. Further applications of chitosan nanofibers are extended and discussed in relation to biomedical fields like tissue engineering scaffolds and wound dressing.
https://www.jtst.ir/article_6470_bdf005b39f91a84d6a50b4786bf1dab0.pdf
کیتوسان
نانوالیاف
مهندسی بافت
پوشش زخم
کاربردهای پزشکی
Chitosan
Nanofiber
Tissue engineering
wound dressing
medical applications
per
موسسه نساجی امروز
علوم و فناوری نساجی و پوشاک
2151-7162
2322-2417
2014-06-01
4
1
19
26
6467
Research/ Original/ Regular Article
بررسی و شناسایی عوامل مؤثر در طول عمر فرش های دستباف
To Study and Establish the Effective Properties in Hand-knotted Carpets’ Lifetime
سید محمود طباطبایی هنزایی
m.tabatabaie@sau.ac.ir
1
محمد قانع
m-ghane@cc.iut.ac.ir
2
حسین حسنی
h_hasani@cc.iut.ac.ir
3
علی زینل همدانی
hamadani@cc.iut.ac.ir
4
عضو هیئت علمی دانشکده هنر دانشگاه علم و هنر یزد
عضو هیئت علمی دانشکده مهندسی نساجی دانشگاه صنعتی اصفهان
عضو هیئت علمی دانشکده مهندسی نساجی دانشگاه صنعتی اصفهان
عضو هیئت علمی دانشکده مهندسی صنایع دانشگاه صنعتی اصفهان
امروزه برای افزایش اطمینان و اشتیاق خرید مشتریان فرشها، تضمین حداقلهای دو عامل مقدار راحتی مصرف و حفظ ظاهر سطحی اولیه فرش نقش معینکنندهای دارد. در پژوهش حاضر، ابتدا خواص فیزیکی فرشهای دستباف که تغییرات کیفی آنها در تعیین طول عمر مصرف فرش مؤثرند، معرفی شده و سپس به روش نظرسنجی درجه اثر هر یک از خواص معین و به کمک نرمافزار Minitab تمام خواص از نظر اولویت اثر، گرو هبندی شدند. این ارزیابی در جامعه آماری 56 نفری از متخصصان علمی و تجاری فر شهای دستباف انجام شد. نتایج تحلیل جدولهای ANOVA به روش آزمون Tukey نمایانگر درجه اثر زیاد شاخص درصد برگشتپذیری )جهندگی( پرزها از مجموعه خواص مرتبط با عملکرد فشاری لایه پرزهاست. پس از آن، ثبات خواص انعکاسی نخهای پرز و دوام طرح و نقش فرشها از مجموعه خواص مرتبط با حفظ ظاهر سطحی است. هفت مشخصه عملکردی منتخب در گروههای اول و دوم، برای توجه و دقت بیشتر در فرایند طراحی تولید فر شهای دستباف به تولیدکنندگان پیشنهاد شدند. افزون بر این، برای جلب اطمینان مشتریان از طول عمر فرش، گارانتی برخی یا تمام این هفت مشخصه توصیه میشود.
Today, to increase customers' assurance and enthusiasm in purchasing carpets a minimum of two criteria must be met, including its degree of comfort and permanency in retaining its original appearance. In this study, first, the physical properties of hand-knotted carpets and the qualitative changes most effective in the service life of the carpets are introduced, and then by questionnaire method in gathering information from individual purchaser the efficacies of the properties have been classified. By using the Minitab software the properties have been grouped in terms of top most prioritized effects. This evaluation was carried in a population of 56 people comprised of academic and commercial experts. The results of ANOVA tables under Tukey method have attested to the high efficacy of “resilient pile yarns” by a high percentage of spring rates in response to compression performance of the piles layers. Accordingly, the cohesion in reflexive properties of the pile yarns and durability in the design and patterns of the carpets are related to the stable surface quality. Seven selected functional properties in the first and second groups were proposed to manufacturers for more careful consideration and accuracy in the production design of hand-knotted carpets. Moreover, guaranteeing some or all the selected properties is recommended to be made to customers in order to assure their confidence in the lifetime performance of the carpet.
https://www.jtst.ir/article_6467_82217e7a143f28cbb063f4b0be4be7f4.pdf
فرش دستباف
طول عمر
لایه پرزهای سطحی
حفظ ظاهر
عملکرد فشاری
Appearance retention
Compressive performance
Hand-Knotted carpet
Lifetime
Surface piles layer
per
موسسه نساجی امروز
علوم و فناوری نساجی و پوشاک
2151-7162
2322-2417
2014-06-01
4
1
27
34
6468
Research/ Original/ Regular Article
ارزیابی اثر تعاملی دما و غلظت قلیا بر جذب رنگزا در پارچه حلقوی پودی پنب های ساده مرسریزه شده
Evaluating the Interactive Effect of Temperature and Alkali Concentration on Dye Absorption of Mercerized Cotton Plain Knitted Fabric
پیمان ولی پور
drpeiman.valipour@gmail.com
1
عبدالرسول مقسم
armogh@yahoo.com
2
مدیر گروه وعضو هیات علمی گروه مهندسی نساجی دانشگاه آزاد اسلامی واحد قائمشهر
عضو هیات علمی تمام وقت
با هدف مطالعه اثر تعاملی غلظت و دمای قلیا بر مقدار جذب ماده رنگزا، نمونههای مختلف از پارچه حلقوی پودی ساده مرسریزه شدند. پس از رنگرزی، مقدار رنگزای برداشت شده به وسیله پارچه با سنجش پساب حمام رنگ معین و محاسبه شد. برای درک عمیقتر از تغییرات در ساختار پارچه، طیف FTIR پارچه خام رنگ شده و پارچه مرسریزه شده با بیشترین جذب بررسی شد. نتایج پژوهش نشان داد، ماده رنگزا در پارچههای مرسریزه شده به مراتب بهتر از نمونه پارچه خام جذب میشود. با وجود این، در دمای کم افزایش غلظت قلیا موجب ازدیاد جذب میشود. با افزایش دمای قلیا، غلظت بهینه کاهش یافت، بهطوری که در دماهای 40 و 60 غلظت بهینه به ترتیب 250 و g/L 200 بود. با افزایش بیشتر دما، افزون بر حصول نتیجه گفته شده، مقدار جذب رنگزا به وسیله پارچه نیز کاهش یافت. با افزایش غلظت سدیم هیدروکسید ضمن رویدادن حداکثر جذب همچنان در دمای 40 از مقدار رنگزای جذب شده به وسیله پارچه کم شد. درنهایت، در محدوده مطالعه شده از دما و غلظت قلیا، دمای 60 و غلظت g/L 200 مناسبترین شرایط برای مرسریزهکردن پارچه معین شد.
Different samples were mercerized to evaluate the interactive effect of temperature and alkali concentration on dye absorption of plain knitted fabrics. The mass of dye picked up by mercerized knitted fabric was estimated by assessment of the wastewater of dyeing process. In order to observe the microstructural changes of the mercerized fabrics, FTIR spectra were recorded for gray fabric and mercerized samples with maximum dye absorption. The results of this study showed that, absorption performance of the mercerized samples was much more superior to that of gray fabric. The dyeing rate increased by alkali concentration at low temperature. Optimum alkali concentration dropped by increases in temperature as in bath temperatures of 40 and 60°C the optimum alkali concentrations were 250 and 200 g/L respectively. In addition to above results, dye absorption decreased by further increase in bath temperature. With the increase in alkali concentration, although the absorption peak appeared at 40°C but the mass of the dye picked up by the fabrics was decreased. Finally, the alkali concentration of 200 g/L at temperature of 60°C were considered the most suitable conditions for mercerization of cotton plain knitted fabric.
https://www.jtst.ir/article_6468_270560aeeb3d5f33a0e5b79f15075041.pdf
پارچه حلقوی پودی
عملیات مرسریزاسیون- جذب ماده رنگزا
غلظت قلیا
دمای قلیا
Plain knitted fabric
Mercerization treatment
Dye absorption
Alkali concentration
Alkali temperature
per
موسسه نساجی امروز
علوم و فناوری نساجی و پوشاک
2151-7162
2322-2417
2014-06-01
4
1
35
42
6469
Research/ Original/ Regular Article
مقایسه فرایندهای مختلف اکسایش پیشرفته بر پایه ازندهی و پرتودهی فرابنفش برای تصفیه پساب حاوی مواد رنگزای واکنشپذیر
Comparison of Various Advanced Oxidation Processes Based on Ozonation and UV Irradiation for Treatment of Wastewater-Containing Reactive Dyes
علی رضا تهرانی بقا
a.r.tehrani@gmail.com
1
حمیده نیک کار
ha_nikkar@yahoo.com
2
عضو هیات علمی پژوهشگاه علوم و فناوری رنگ/گروه رنگ و محیط زیست - پژوهشگاه علوم و فناوری رنگ، تهران، ایران
پژوهشگاه علوم و فناوری رنگ/گروه رنگ و محیط زیست
در این پژوهش، تصفیه پسابهای نساجی شبیهسازی شده با فرایندهای اکسایش پیشرفته بر پایه ازندهی و پرتودهی فرابنفش به تنهایی و بهطور ترکیبی بررسی شد. بدین منظور دو منبع نوری فرابنفش )لامپ W9 ،UV-C کم فشار و لامپ W150 ،UV-C با فشار متوسط( استفاده و اثر هر یک به تنهایی و در ترکیب با فرایند ازندهی معین شد. از سه رنگزای واکنشپذیر تجاری مرسوم آبی 4، قرمز 45 و نارنجی 14 استفاده شد. سرعت فرایند رنگبری و بازده حذف اکسیژن مورد نیاز شیمیایی (COD) پساب با سامانههای مختلف اکسایش در pH خنثی و قلیایی مطالعه شد. پرتودهی فرابنفش با استفاده از لامپهای کم فشار و فشار متوسط UV-C باعث افزایش بازده حذف COD و کل کربن آلی (TOC) پساب شد. نتایج نشان داد، صرفنظر از ساختار مواد رنگزا، رنگبری کامل % 100 ، حذف COD بیش از % 95 و حذف 56% TOC با استفاده از ترکیب فرایند ازندهی و پرتودهی فرابنفش امکانپذیر است.
The treatment of simulated textile wastewater was examined by advanced oxidation processes based on ozonation and UV irradiation, as individual and combined methods. For this purpose, two ultraviolet light sources )i.e., low pressure UV-C 9 W and medium pressure UV-C 150 W lamps( were used and the effect of each one on wastewater treatment was determined individually and in combination with ozonation process. Three conventional commercial reactive dyes) Blue 4, Red 45, and Orange 14(were used in this study. The rates of color and COD removals by oxidation of the systems were studied at neutral and alkaline pH. The ozonation process was enhanced by UV irradiation using low-pressure or medium-pressure UV-C lamps and the removal efficiencies of COD and TOC were increased to some extent. Regardless of the dye chemical structures, complete color removal, 95% COD and 56% TOC were achieved by a combination of ozonation and UV irradiation.
https://www.jtst.ir/article_6469_fdfc35d3ffe257f6c20ffd3d5993fa9d.pdf
اکسیداسیون پیشرفته
اُزُن دهی
پرتو دهی ماوراء بنفش
پساب نساجی
رنگزای راکتیو
Advanced oxidation
ozanation
UV Irradiation
Textile wastewater
reactive dye