@article { author = {Alamdar yazdi, Aliasghar and soheilipour, azam}, title = {Title: Assessment of Stability in the Nano Particles of Persian Gum for Increase of Resistance in Historical Cellulose Textiles}, journal = {Journal of Textile Science and Technology}, volume = {6}, number = {2}, pages = {5-12}, year = {2017}, publisher = {Today Textile Institute}, issn = {2151-7162}, eissn = {2322-2417}, doi = {}, abstract = {The aim of this study is the evaluation of nanoparticles of Persian Gum for reinforcement of historical cellulose textiles to prevent the erosion process. The method of study is based on the extraction of nanoparticles of Persian gum, optimization and spray of substance on the textile samples. One sample of each mass fraction is placed under accelerated aging of humidity - temperature and light for comparison. Zeta potential is computed to study the stability of the treatment, and pH measurement is exploited to evaluate the pH of the proposed approach and the reinforced samples. To evaluate the resistance of the reinforced samples, the samples are studied under SEM test and mechanical resistance analysis. The result of Zeta Potential reports high stability of nanoparticles equal to -25.3 mV. Moreover, the performed experiments show that preserves its steady and uniformity even after time passes. pH Measurement is applied to report the pH of the reinforced samples in alkaline range before and after aging. pH has improved from the range [0.84, 0.92] before aging to the range of [0.95, 1.15] after aging. SEM reported strengthening and repairing the broken fibers. Mechanical resistance analysis showed that the power of failure has been increased, and presented the tensile stress before and after aging.}, keywords = {Key Words: nanoparticles of Persian Gum,Reinforcement,Stability,Historical Cellulose Textiles}, title_fa = {ارزیابی پایداری نانوذرات صمغ فارسی جهت افزایش استحکام و مقاومت آثار پارچه‌ای سلولزی تاریخی}, abstract_fa = {هدف این پژوهش، بررسی پایداری نانو ذرات صمغ فارسی جهت افزایش استحکام و مقاومت پارچههای سلولزی تاریخی در راستای ممانعت از فرایند فرسایش آن‌ها می‌باشد. روش پژوهش، استخراج نانو ذرات صمغ فارسی، بهینه‌سازی آن و اسپری تیمار حاصل، روی نمونههای پارچهای بوده و یک عدد نمونه از هر درصد وزنی جهت مقایسه، تحت پیرسازی رطوبت- دما و نور قرار داده شد. پتانسیل زتای ماده به منظورتاثیر پایداری ماده صورت گرفت. به‌منظور بررسی اسیدیته و ذخیره قلیایی در نمونه‌ها،pH سنجی محلول و نمونه‌های تیمار شده انجام شد. جهت بررسی میزان استحکام و مقاومت نمونه‌های تیمار شده، نمونه‌ها توسط میکروسکوپ الکترونی روبشی (SEM) و آنالیز مقاومت مکانیکی مطالعه گردیدند. نتایج پتانسیل زتا حاکی از پایداری بالای نانو ذرات به میزان بار(mV) 3/25- است و طی گذشت زمان نیز جزء تیمار صمغ نیز حالت یک‌دست و یکنواخت خود را حفظ نموده است. pH سنجی، pH نمونههای تیمار شده قبل و بعد از پیرسازی را در محدوده قلیایی گزارش نمود و pHبه میزان 84/0 تا 92/0 قبل از پیرسازی به 95/0 تا 15/1 بعد از پیرسازی افزایش یافته است. آنالیز SEM، تقویت و ترمیم پیوند شکسته الیاف را گزارش داد. آنالیز مقاومت مکانیکی، افزایش نیروی گسیختگی و تنش کششی را قبل و بعد از پیرسازی نشان داد.}, keywords_fa = {واژگان کلیدی: نانو ذرات صمغ فارسی,پایداری,استحکام بخشی,آثار پارچه ای سلولزی}, url = {https://www.jtst.ir/article_51128.html}, eprint = {https://www.jtst.ir/article_51128_9137db4295ed6552220cd6e66dc880d4.pdf} } @article { author = {Feiz, Mahmudi and Radfar, Zeynab}, title = {Application of Natural and Synthetic Tanning agent and Cationic Compounds for Improvement of Wash Fastness of dyed Silk, Wool and Nylon with Acid Dyes}, journal = {Journal of Textile Science and Technology}, volume = {6}, number = {2}, pages = {13-18}, year = {2017}, publisher = {Today Textile Institute}, issn = {2151-7162}, eissn = {2322-2417}, doi = {}, abstract = {In this work, we studied and compared the effectiveness of three different aftertreatments including full backtan, syntan and syntan/cation process on improvement of wash fastness of three different acid dyes applied on wool, silk and nylon. The effectiveness of the aftertreatments were determined, according to the ISO 105CO6 wash test. The results showed that Aftertreatment with natural tannins gained the highest wash fastness improvement. Although treating dyed samples with syntan improved the wash fastness of dyes, subsequent application of cationic agent enhanced their wash fastness to a great extent. The highest improvement of wash fastness was achieved in the case of acid dye with larger molecular size (supermilling acid dye). In addition, aftertreatments was more effective on acid dye with more sulphonic groups (leveling acid dye) and therefore more solubility. Comparing the results for different fibers, we found that the highest wash fastness improvement was obtained in the case of nylon while aftertreatments on wool and silk were also effective, but to a lesser extent.}, keywords = {"Natural tannin","Syntan","Cationic compound"," Wash fastness","Acid dye"}, title_fa = {کاربرد تانن‌های طبیعی، مصنوعی و ترکیبات کاتیونیک به‌منظور افزایش ثبات شستشویی ابریشم، پشم و نایلون رنگرزی شده با رنگزای اسیدی}, abstract_fa = {در این مطالعه تأثیر عملیات‌های بعدی با استفاده از تانن طبیعی، سینتان و سینتان/ترکیب کاتیونیک بر ثبات شستشویی سه رنگزای اسیدی از سه کلاس رنگزای مختلف بر الیاف پشم، ابریشم و نایلون بررسی گردید. بازده عملیات‌های بعدی روی الیاف رنگ‌شده با رنگزاهای مذکور با کاربرد آزمون شستشویی ISO105CO6 بررسی گردید. نتایج نشان داد که روش عملیات بعدی با تانن طبیعی مؤثرترین روش عملیات بعدی در میان سه روش مذکور بود. عملیات بعدی با سینتان نیز موجب افزایش ثبات شستشویی کالاهای رنگ‌شده گردید و افزودن ترکیب کاتیونیک به کالاهای عمل شده با سینتان سبب افزایش قابل‌توجهی در بازده عملیات بعدی با سینتان گردید. بیشترین افزایش ثبات شستشویی، در مورد رنگزای اسیدی با اندازه مولکولی بزرگ‌تر (رنگزای اسیدی سوپرمیلینگ) به‌دست آمد. همچنین عملیات‌های بعدی بر رنگزای با تعداد گروه سولفونه بیشتر و درنتیجه حلالیت بیشتر، مؤثرتر بودند. در مقایسه بین تأثیر عملیات‌های بعدی بر الیاف مختلف، بیشترین تأثیر بر روی الیاف نایلون رنگرزی شده مشاهده گردید و الیاف پشم و ابریشم به ترتیب در رده‌های بعدی جای گرفتند.}, keywords_fa = {"تانن‌ طبیعی","سینتان","ترکیبات کاتیونیک","ثبات شستشویی","رنگ اسیدی"}, url = {https://www.jtst.ir/article_51130.html}, eprint = {https://www.jtst.ir/article_51130_99e21188293a62ae2827e898d2c05950.pdf} } @article { author = {Izadan, Hosein}, title = {A Review on Poly(lactic acid) Fibre Fabrics Finishing Processes: Plasma Treatments, UV/Ozone Irradiation, Superhydrophobic surface Manufacturing, Enzymatic Treatment}, journal = {Journal of Textile Science and Technology}, volume = {6}, number = {2}, pages = {19-26}, year = {2017}, publisher = {Today Textile Institute}, issn = {2151-7162}, eissn = {2322-2417}, doi = {}, abstract = {In recent years, the new family of aliphatic polyester that named poly lactic acid, is characterized by particular fiber forms, yarns and fabric constructions. This fibres can be derived from 100% renewable resources such as corn.A variety of processing applications (scouring, bleaching, enzyme treatment, plasma, thermal setting) that imparts the greatest chemical and physical effect on the Poly(lactic acid) fibres necessitate major attention. The finish of a fabric is often just as important as innovative designs and materials when used for garment manufacture. Finishes can compensate for, or even reduce, fibre embrittlement caused by bleaching, dyeing and printing processes and increase the functionality of the product.Poly lactic acid is compostable and recyclable, decomposing in 45-60 days in normal composting conditions (typically 50-60 °C and 90-95% humidity). So in this paper the best conditions for processing treatments of Poly(lactic acid) fibre and its effects on the fibre will be reviewed. This was accomplished through a broad literature survey including recent researches and developments in the area.}, keywords = {Poly(lactic acid) fibres,Finishing Treatment,Thermal Setting,Superhydrophobic surface,Plasma}, title_fa = {مروری بر فرآیندهای تکمیل منسوجات تهیه شده ازالیاف پلی لاکتیک اسید : عملیات پلاسما ، تابش UV/Ozone، تولید سطوح ابرآبگریز ، عملیات آنزیمی}, abstract_fa = {در سال های اخیر،کلاس جدیدی از پلی استرهای خطی که پلی لاکتیک اسید نام دارند به شکل الیاف، نخ و پارچه تولید می شوند. این الیاف از منابع تجدید پذیر سالانه مانند ذرت مشتق می شوند.پروسه های تکمیلی متفاوتی از جمله عملیات آنزیمی، پلاسما و کاربرد نرم کن ها که اثرات فیزیکی و شیمیایی متفاوتی بر الیاف پلی لاکتیک اسید دارند، در حال استفاده هستند. تکمیل پارچه همان اندازه اهمیت دارد که طرح لباس و انتخاب رنگزا مهم است. فرآیندهای تکمیلی می توانند شکنندگی الیاف را که در سفیدگری، رنگرزی و عملیات چاپ به وجود می آید،کاهش دهند و در عین حال باعث افزایش کارایی پارچه و لباس می شوند.از آنجا که پلی لاکتیک اسید قابل بازیافت و تبدیل شدن به کود است، ظرف 45 الی 60 روز در دمای 50-60 در جه سانتیگراد و رطوبت 90-95% تخریب می شود. لذا در این مقاله مروری، توضیحاتی درباره روش و شرایط بهینه ی فرآیندهای تکمیلی الیاف پلی لاکتیک اسید و اثرات آن ها بر لیف ارائه شده است. در قسمت پیشین مروری بر روش تولید، خواص، کارایی و موارد مصرف الیاف پلی لاکتیک اسید ارائه شده است.}, keywords_fa = {الیاف پلی لاکتیک اسید,عملیات تکمیلی,تثبیت حرارتی,سطوح ابرآبگریز,پلاسما}, url = {https://www.jtst.ir/article_51135.html}, eprint = {https://www.jtst.ir/article_51135_b9f6ff77862624b573ca1912898edb3b.pdf} } @article { author = {خانی گوآبادی, محبوبه and Mazrouei-Sebdani, Zahra and Khoddami, Akbar}, title = {An investigatoin into the different finishing methods of the bedding textiles with a relaxing natural extract of the Jasmine flower.}, journal = {Journal of Textile Science and Technology}, volume = {6}, number = {2}, pages = {27-36}, year = {2017}, publisher = {Today Textile Institute}, issn = {2151-7162}, eissn = {2322-2417}, doi = {}, abstract = {AbstractThe purpose of this study is to invesigate the different finishing methods of the bedding non-woven textiles. The aroma materials used in this study were Jasmine flower powder, its alcoholic extract, and encapsulated extract containing antidepression active substances. A polyester non-woven fabric was finished with the above aroma materials using poly (acrylic acid) binder as an incorporating material on the surface of the non-woven fabric. Then, releasing behavior of the samples was investigated within a month. The statistic results of the releasing behavior and measuring of the aroma materials odor intensity showed better results for the samples finished with the powdered flower and its encapsulated extract. However, the finished sample by the powdered Jasmine flower was not washable, so that the encapsulaed samples were selected for washing and abrashion fastness tests. Also, other properties containing releasing behavior, air permeability, and flexibility were measured.The results showed, for disposable textiles, powdered Jasmine is more durable and affordable, economically. When long-term durable finishing is requied, using of the encapsulated extract is recommended.Key words: Aroma textile, Aroma finishing, Microcapsul, Extract, Jasmin flower}, keywords = {Aroma textile,Aroma finishing,Microcapsul,Extract,Jasmin flower}, title_fa = {بررسی روش های مختلف تکمیل کالای خواب با عصاره طبیعی آرامش بخش گل یاسمن}, abstract_fa = {در این تحقیق روش های مختلف تکمیل منسوج بی بافت موجود در کالای خواب با استفاده از عصاره های طبیعی آرامش بخش بررسی شد.مواد معطر مورد استفاده، پودر گل یاسمن، عصاره الکلی و عصاره کپسوله شده این گل است که علاوه بر خواص آرامش بخشی، دارای مواد فعال ضدافسردگی نیز است. برای اتصال ماده معطر با سطح منسوج از بیندر پلی اکریلیک اسید استفاده شد. تکمیل با هر سه ماده بر روی منسوج انجام شد. سپس رفتار رهایشی نمونه های تکمیل شده طی یک ماه بررسی شد. نتایج حاصل از بررسی رفتار رهایشی، نشان داد نمونه های تکمیل شده با پودر گل یاسمن و عصاره کپسوله شده، ماندگاری بهتری دارد. با توجه به عدم امکان شستشو در نمونه تکمیل شده با پودر گل یاسمن، نمونه کپسوله شده جهت ازمون ثبات های شستشویی و سایشی انتخاب شد. سپس، خواص ایجاد شده در کالای تکمیل شده همچون رفتار رهایشی، عبوردهی هوا و انعطاف پذیری اندازه گیری شد. نتایج حاصل از ازمایشات نشان داد، برای منسوجات یک بار مصرف، استفاده از پودر گل یاسمن علاوه بر ایجاد دوام بیشتر، به لحاظ اقتصادی مقرون به صرفه تر است. برای کالاهایی که استفاده طولانی مدت دارند استفاده از عصاره های کپسوله شده پیشنهاد می شود.}, keywords_fa = {منسوج معطر,تکمیل معطر,میکروکپسول,عصاره,گل یاسمن}, url = {https://www.jtst.ir/article_51136.html}, eprint = {https://www.jtst.ir/article_51136_95f5f3e95e207b6561f0577966ace8b2.pdf} } @article { author = {Nikfar, Tayebeh}, title = {Given the relationship between innovation performance on financial performance variables intermediary market performance and yield}, journal = {Journal of Textile Science and Technology}, volume = {6}, number = {2}, pages = {37-42}, year = {2017}, publisher = {Today Textile Institute}, issn = {2151-7162}, eissn = {2322-2417}, doi = {}, abstract = {This study examined the influence of innovation performance on financial performance. The aim of the present study is to provide a model of organizational performance with considering the independent variable innovation performance and the intermediary variables of market and product performance. The questionnaire was designed based on literature review and interviews with experts. The expert panel and confirmatory factor analysis is used to prove the validity of questionnaire. Statistical data is collected from the entire community, including senior executives of 130 businesses - small and medium enterprises in the textile industry in Kashan.100 questionnaires were completed. The research results suggest that innovation performance has a direct and significant impact on market performance. The results also showed a significant correlation between variables of research.The research results suggest that innovation performance has a direct and significant impact on market performance. The results also showed a significant correlation between variables of research.The results also showed a significant correlation between variables of research.The research results suggest that innovation performance has a direct and significant impact on market performance. The results also showed a significant correlation between variables of research}, keywords = {Innovation Performance,Market Performance,financial performance,Product Performance,textile industry}, title_fa = {تبیین رابطه عملکرد نوآوری بر عملکرد مالی با درنظرگرفتن متغییرهای میانجی عملکرد بازار و عملکرد محصول در صنعت نساجی}, abstract_fa = {پژوهش حاضر به بررسی میزان تاثیر‌گذاری متغیر عملکرد نواوری بر عملکرد مالی می پردازد. و هدف از انجام این پژوهش تدوین مدلی از ابعاد عملکرد در سازمان با فرض متغیر مستقل عملکرد نواوری و متغیرهای میانجی عملکرد بازار و عملکرد محصول است. به دلیل این که بتوان عملکرد مالی بیشتری را برای سازمان ایجاد کرد. پرسشنامه پژوهش براساس مرور ادبیات و مصاحبه با خبرگان طراحی شده است. برای اثبات روایی آن علاوه بر نظر خبرگان از تحلیل عاملی تاییدی نیز استفاده شده است. داده ها از کل جامعه آماری که شامل مدیران ارشد 130کسب‌وکارهای کوچک و متوسط در صنعت نساجی در کاشان است جمع آوری شده است. از میان این تعداد پرسشنامه توزیع شده 100 پرسشنامه تکمیل گردید. یافته‌های پژوهش نشان می دهد که عملکرد نواوری بر عملکرد بازار و عملکرد محصول رابطه مثبت و مستقیم دارد ولی با عملکرد مالی رابطه مثبت و غیر مستقیم از طریق متغیر میانجی عملکرد بازار دارد. همچنین ضرایب مسیر نشان می‌دهد که همبستگی قابل توجهی بین متغیرهای تحقیق وجود دارد.از میان این تعداد پرسشنامه توزیع شده 100 پرسشنامه تکمیل گردید. یافته‌های پژوهش نشان می دهد که عملکرد نواوری بر عملکرد بازار و عملکرد محصول رابطه مثبت و مستقیم دارد ولی با عملکرد مالی رابطه مثبت و غیر مستقیم از طریق متغیر میانجی عملکرد بازار دارد. همچنین ضرایب مسیر نشان می‌دهد که همبستگی قابل توجهی بین متغیرهای تحقیق وجود دارد.}, keywords_fa = {عملکرد نوآوری,عملکرد مالی,عملکرد بازار,عملکرد محصول,صنعت نساجی}, url = {https://www.jtst.ir/article_51137.html}, eprint = {https://www.jtst.ir/article_51137_307f6f9bfcd01ae70001b57a38f51aaf.pdf} } @article { author = {Khavas, Mahsa and Zaerhosseini, Mahya and Tavanaie, Mohammad Ali and Mahmoudi, Abolfazl}, title = {A morphology study of PA 6 electrospun nanofibers using single and double side nozzles jet}, journal = {Journal of Textile Science and Technology}, volume = {6}, number = {2}, pages = {51-43}, year = {2017}, publisher = {Today Textile Institute}, issn = {2151-7162}, eissn = {2322-2417}, doi = {}, abstract = {English abstract:In this investigation the effects of some parameters such as voltage, distance between nozzle and collector and polymer solution concentration in the single nozzle electrospinning of PA 6 nanofibers were studied. Then according to optimized condition of electrospinning, the morphology of nanofibers web (diameters and their evenness) which electrospun with one and double side nozzles were considered. The results showed that the most effective parameter on nanofibers diameter is polymer solution concentration. Average diameter of nanofibers decreased with decreasing the polymer solution concentration. Average diameter of nanofibers produced with double side nozzles electrospinning is more uniform comparing with the nanofibers webs produced with single nozzles electrospinning. Accordingly, the electrospinning with double side nozzles is suitable method for producing the higher amount of nanofibers at short time.n this investigation the effects of some parameters such as voltage, distance between nozzle and collector and polymer solution concentration in the single nozzle electrospinning of PA 6 nanofibers were studied.}, keywords = {کلمات کلیدی: الکتروریسی,جت تک نازله,جت دونازله دوسویه,مورفولوژی,نانو الیاف}, title_fa = {مطالعه مورفولوژی نانو الیاف پلی آمید ۶ الکتروریسی شده به‌روش جت تک نازله و دو نازله دوسویه}, abstract_fa = {چکیده فارسی:در این پژوهش تاثیر متغیرهای ولتاژ، فاصله بین سوزن و جمع کننده و غلظت محلول پلیمری در فرایند الکتروریسی نانوالیاف پلی‌ۀمید 6 به روش تک نازله مورد مطالعه قرار گرفت. سپس براساس بهترین شرایط الکتروریسی تعیین شده، مورفولوژی (اندازه قطر و یکنواختی قطر) وب نانو الیاف تولید شده به دو روش تک نازله و دو نازله دو سویه مورد بررسی قرار گرفت. نتایج نشان داد متغیر غلظت محلول الکتروریسی مؤثرترین متغیر موثر بر روی قطر نانوالیاف است. با کاهش غلظت محلول الکتروریسی، میانگین قطر نانوالیاف کاهش می‌یابد. مقایسه نمونه‌های الکتروریسی شده دونازله دو سویه با نمونه الکتروریسی شده تک نازله مشابه خود، ملاحظه شد که میانگین قطر نانوالیاف تولیدی حاصل از فرایند الکتروریسی دونازله دو سویه دارای یکنواختی بیشتری است. بنابراین این روشی مناسب برای تولید نانوالیاف با مقادیر بیشتر در مدت زمان تولید کمتر نسبت به الکتروریسی تک‌نازله است.کلمات کلیدی: الکتروریسی، تک نازله، دونازله دوسویه، مورفولوژی، نانو الیاف}, keywords_fa = {کلمات کلیدی: الکتروریسی,جت تک نازله,دونازله دوسویه,مورفولوژی,نانو الیاف}, url = {https://www.jtst.ir/article_51139.html}, eprint = {https://www.jtst.ir/article_51139_daa1369310f933cd9da1dcb51e196f68.pdf} }