@article { author = {Afrashteh, Siavash and Eskandarnejad, ‌Safdar}, title = {Effect of Geometrical Parameters of the Yarn Channel in an Intermingling Jet on Nip Structure and Stability of Textured Yarn}, journal = {Journal of Textile Science and Technology}, volume = {2}, number = {4}, pages = {195-200}, year = {2013}, publisher = {Today Textile Institute}, issn = {2151-7162}, eissn = {2322-2417}, doi = {}, abstract = {Intermingling of wound yarns is an important method of producing cohesiveness between the individual filament yarns. Many researchers have studied the effects of various parameters on yarn production. This paper attempts to investigate the effect of length and cross-sectional area of the yarn channel on yarn properties. A total of nine jets with yarn channel lengths of 20, 30 and 40 mm, and square cross section of 1.5, 2.25 and 3.0 mm were tested. The tests were carried out on the yarns to examine nip stability and microscopic observation of the nip points. It was concluded that, a short and narrow yarn channel may produce a short nip length with maximum nip density and stability. While, a long and wide yarn channel produces a long nip length with lowest nip density and stability. The width of the yarn channel had an effect on loose nips, while in the longest channel (40 mm), there was no difference on loose nips. The last class was two or more parallel structures, which decreased as the width of the yarn channel decreased. Loose nips varied in different channel lengths, though it did not show a specific trend.}, keywords = {Intermingling Jet,Nip Stability,Nip Structure,Yarn Channel,Yarn Channel Dimension}, title_fa = {اثر پارامترهای هندسی کانال عبور نخ جت گیرشی بر ثبات و ساختار نقاط گیرش در نخ بافته شده}, abstract_fa = {فرایند درهم‌کردن نخ‌های رشته‌ای به وسیله جت هوا در سال‌های اخیر به دلیل هزینه تولید کمتر، کاربردهای متنوع محصول تولیدی و کارایی بهتر جت درهم‌کردن گسترش زیادی یافته است. به دلیل اهمیت فرایند درهم‌کردن، پژوهشگران بسیاری روی این روش کار کرده و نتایج زیادی به‌دست آمده است. در این فرایند به رشته‌های باز و موازی نخ یکسره تغییر شکل‌یافته یا شکل‌نیافته پیوستگی بین رشته‌های متناوب و موقت داده می‌شود. نوع جت، ابعاد، قطر مجرای ورود هوا‌، طول و قطر کانال عبور نخ  بر ساختار گیرش و ثبات نخ اثر دارد. در این پژوهش، طول و قطر کانال عبور نخ تغییر داده شد تا اثر این تغییرات بر ساختار و ثبات گیرش نخ تولیدی بررسی شود. بدین منظور 9 جت با سه طول 20، 30 و mm 40 و سه مقطع کانال عبور نخ 1.5×1.5، 2.25×2.25 و mm 3×3 طراحی و ساخته شد. نخ‌های تهیه شده از 9 جت ساخته شده از نظر ثبات و ساختار نقاط درهم‌رفته بررسی شدند. نتایج آزمون‌های انجام شده نشان داد، در جت‌های با طول کوتاه و قطر کانال عبور نخ باریک، ثبات نقاط درهم‌رفته بیشتر شده و نقاط درهم رفته آنها شکل چندساختاری و باز نشو در اثر تنش‌های وارد شده دارند. هر چه طول بلندتر و کانال عبور نخ گشادتر شود، ثبات نقاط درهم‌رفته کاهش می یابد و ساختار نقاط درهم‌رفته شل‌تر می‌شود.}, keywords_fa = {جت گیرشی,ثبات گیرش,ساختار گیرش,کانال عبور نخ,ابعاد کانال عبور نخ}, url = {https://www.jtst.ir/article_2842.html}, eprint = {https://www.jtst.ir/article_2842_d36fa868a36d9c0c7bbc3d7d1ed7e191.pdf} } @article { author = {Sarbaha, Seyedeh Samaneh and Khajavi, Ramin and Berendjchi, Amir Hosein and Pourariyan, Sepehr}, title = {Starch Fibers Production by Wet Spinning in Rotational Coagulation Bath}, journal = {Journal of Textile Science and Technology}, volume = {2}, number = {4}, pages = {201-207}, year = {2013}, publisher = {Today Textile Institute}, issn = {2151-7162}, eissn = {2322-2417}, doi = {}, abstract = {Due to polymer chains spatial and complexities arising in spinning dope preparations there has not been much effort made on production of starch fibers. In this study, a new procedure based on wet spinning is introduced for dope spinning in a rotational coagulation bath by choosing a suitable solvent. Wheat starch solubility was tested in different solvents including water, water/alkaline, water/DMSO and DMSO. Then, suitable spinning dopes were injected into a rotating coagulation bath containing water/alcohol and ready staple fibers were collected by filtration. As-spun fibers were evaluated by scanning electron microscope, Fourier transform infrared spectroscopy (FTIR) and X-ray diffraction (XRD) and tensile mechanical tests. The results showed that among all solvents, DMSO was the most suitable solvent. Staple fibers of fine (3-5 μm) and amorphous morphology were obtained by using wet spinning method in a rotational coagulation bath, which have potential application in paper and medical industries considering thelengths and small diameters of the fibers obtained.}, keywords = {starch fibers,wet spinning,rotating coagulation bath,DMSO,wheat starch}, title_fa = {تولید الیاف نشاسته به روش ترریسی در حمام انعقاد چرخشی}, abstract_fa = {به علت پیچیدگی ساختار فضایی زنجیرها، دشواری تهیه محلول ریسندگی و ریسیدن آن، پژوهش‌ های اندکی در زمینه تولید الیاف نشاسته انجام شده است. در این پژوهش، پس از انتخاب حلالی مناسب روشی نوین برای ریسیدن محلول ریسندگی بر اساس ترریسی در حمام انعقاد چرخشی ارائه شد. نشاسته گندم به عنوان ماده اولیه انتخاب و انحلال‌ پذیری آن در حلال‌ های مختلف شامل آب، آب- قلیا‌، دی‌ متیل سولفوکسید (DMSO) و آب - DMSO بررسی شد. در نهایت محلول‌ های ریسندگی مناسب به داخل حمام انعقاد مخلوط آب - الکل در حال چرخش تزریق شدند و الیاف منقطع تولیدی به کمک صافی جمع‌ آوری شدند. الیاف به وسیله میکروسکوپی الکترون پویشی، طیف‌ سنجی زیرقرمز، پراش پرتو X و آزمون استحکام بررسی شدند. نتایج نشان داد، حلال DMSO در میان حلال‌ های بررسی شده مناسب‌ تر است. با استفاده از ترریسی در حمام انعقاد چرخشی الیاف منقطع نشاسته با ظرافت بین mm 5-3 تولید شد که دارای ساختار بی‌ شکل بودند. الیاف تولیدی با توجه به طول و ظرافت پتانسیل بالقوه‌ ای را برای کاربری در صنایع کاغذسازی و پزشکی دارند. }, keywords_fa = {الیاف نشاسته,ترریسی,حمام انعقاد چرخشی,DMSO,نشاسته گندم}, url = {https://www.jtst.ir/article_2843.html}, eprint = {https://www.jtst.ir/article_2843_ff02fffab5723935c6ca06a26af547a8.pdf} } @article { author = {Mazdak, Zeinab and Payvandy, Pedram and Alamdar Yazdi, ALi Asghar}, title = {Extracting and Clustering Stone-Wash Design in Jeans Images Using K-means Algorithm}, journal = {Journal of Textile Science and Technology}, volume = {2}, number = {4}, pages = {209-215}, year = {2013}, publisher = {Today Textile Institute}, issn = {2151-7162}, eissn = {2322-2417}, doi = {}, abstract = {Jeans have increasingly become popular among young people worldwide, just the same as in global markets, and therefore their quality needs to be controlled carefully. This paper deals with the classification of the stone-wash jeans by using k-means clustering algorithm. A total of 306 ready jeans were prepared and the stoned zones of their front and back were imaged under light projection. The K-means clustering algorithm was used to extract jean stone-wash designs. Finally clustering schemes were applied by K-means clustering in order to achieve the optimized condition by running the program one hundred times on the front and the back of the trousers. The clustering validity method was based on Davies-Bouldin Index as the best method. Finally, the result of the above method was compared with the optical method. The results showed that k-means clustering method, applied on stone-wash design, was comparable with the unaided eye observation by 60%.}, keywords = {Stone-wash design,K-means Algorithm,image processing,Clustring}, title_fa = {استخراج و طبقه‌بندی تصاویر طرح سنگ شور پوشاک جین با استفاده از الگوریتم خوشه‌بندی K-means}, abstract_fa = {با توجه به استقبال گسترده نسل جوان از پوشاک جین و به‌ طور ویژه شلوارهای جین، طراحی و کنترل کیفیت این لباس‌ها از اهمیت بسزایی برخوردار است. با توجه به اهمیت این موضوع در صنعت پوشاک، هنوز طبقه‌بندی خاصی برای طرح‌های سنگ‌ شور مورد استفاده در شلوار جین ارائه نشده است. در این مقاله، از 306 طرح سنگ‌ شور جلو و پشت شلوار جین در شرایط یکسان نورپردازی، تصویربرداری شد. پس از پیش‌ پردازش تصاویر، با استفاده از الگوریتم خوشه‌بندی K-means، طرح سنگ‌ شور جداسازی شد و در نهایت با استفاده از خوشه‌بندی K-means، تقسیم‌ بندی طرح‌های سنگ‌ شور بخش‌ های جلو و پشت شلوار انجام شد. برای تعیین خوشه‌ بندی بهینه طرح‌ های سنگ‌ شور، برنامه خوشه‌بندی طرح‌های سنگ‌ شور بخش‌ های جلو و پشت شلوار، 100 مرتبه اجرا شد و با توجه به شاخص اعتبارسنجی دیویس- بولدین (DB)، بهترین خوشه‌ بندی انتخاب و با خوشه‌ بندی چشمی (بصری) مقایسه شد. نتایج حاکی از این است که روش خوشه‌ بندی K-means تا %60 با روش خوشه‌ بندی چشمی مطابقت دارد.}, keywords_fa = {سنگشور جین,الگوریتم K-means,پردازش تصویر,خوشه بندی}, url = {https://www.jtst.ir/article_2844.html}, eprint = {https://www.jtst.ir/article_2844_7cd7c997f71018f5f9b56df2a159e5e4.pdf} } @article { author = {Jamadi, Elham Sadat and Khoddami, Akbar and Sadrearhami, Zahra}, title = {Microwave and UV-Assisted Surface Modification of Polypropylene Fibers}, journal = {Journal of Textile Science and Technology}, volume = {2}, number = {4}, pages = {217-222}, year = {2013}, publisher = {Today Textile Institute}, issn = {2151-7162}, eissn = {2322-2417}, doi = {}, abstract = {Polypropylene due to its non-polar nature has some limitations in certain special applications which are vulnerable by the surface properties of the fibers. Nowadays, research on surface modification of polypropylene (PP) textile fibers has also focused on improvement of their main drawbacks such as low moisture absorption and anti-static properties. This paper deals with novel low water using methods to modify the surface of polypropylene fibers by “ultraviolet radiation-hydrogen peroxide” and “microwave radiation”. Therefore, the samples were treated in different conditions and the surface properties were studied by measurement of moisture absorption, anti-static properties, tensile tests and FTIR-ATR spectroscopy. The results showed an increase in moisture absorption combined with improvement in anti-static properties, while the applied methods did not show any significant adverse effects on the tensile strength of the fibers. In addition, the analysis of the ATR spectra revealed some chemical changes and formation of functional groups such as carbonyl and vinyl groups on the surface of modified fibers. Overall, the results showed that the above methods can be applied for surface modification of PP fibers with considerable time and energy savings and low oxidant concentration which are textile industries priorities to minimize environmental pollution.}, keywords = {polypropylene,surface oxidation,Hydrogen peroxide,microwave radiation,anti-static properties}, title_fa = {اصلاح سطح الیاف پلی پروپیلن با استفاده از تابش پرتوهای ریزموج و فرابنفش}, abstract_fa = {پلی‌ پروپیلن به دلیل داشتن ماهیت غیرقطبی از نظر کاربردهای ویژه‌ ای که متأثر از خواص سطح الیاف است، محدودیت دارد. امروزه اصلاح سطح الیاف پلی‌ پروپیلن به دلیل معایبی همچون جذب رطوبت کم و مشکل الکتریسیته ساکن به یکی از موضوعات مورد توجه پژوهشگران تبدیل شده است. در این طرح، به منظور اصلاح سطح الیاف پلی‌ پروپیلن از عملیات اکسایش سطح با استفاده از هیدروژن پراکسید - تابش پرتوهای فرابنفش و ریزموج، به عنوان روش‌ هایی با مصرف آب کمتر استفاده شده است. بدین منظور، نمونه‌ ها در شرایط مختلف عمل‌ آوری‌ شده و آثار آزمون‌ها بر نمونه‌ ها با اندازه‌ گیری مقدار جذب رطوبت، استحکام، خواص ضدالکتریسته و طیف‌سنجی، ارزیابی شد. نتایج مشخص کرد، در همه نمونه‌ های عمل آوری‌ شده جذب رطوبت افزایش یافته و با کاهش استحکام جزئی و در حد قابل قبول خواص ضدالکتریسته بهبود یافته است. همچنین طیف‌ های ATR  بیانگر تغیرات شیمیایی و ایجاد گروه‌های عاملی مثل کربونیل و وینیل در سطح الیاف است. در مجموع نتایج نشان می‌ دهد، با استفاده از این روش‌ های نوین امکان اصلاح سطح همراه با صرفه‌ جویی در زمان و انرژی و همچنین کاهش آلودگی به دلیل مصرف غلظت‌ های کمتری از اکسنده قابل دستیابی بوده که این موارد از اولویت‌ های صنعت نساجی است.}, keywords_fa = {پلی پروپیلن,اکسایش سطح,هیدروژن پراکسید,تابش ریزموج,تابش فرابنفش,خواص ضدالکتریسیته}, url = {https://www.jtst.ir/article_2847.html}, eprint = {https://www.jtst.ir/article_2847_52228af175d36c8c92306e9aca9685c6.pdf} } @article { author = {Hatamvand, Mohammad and Mirjalili, Seyyed Abbas and Hadizadeh, Mohsen}, title = {Monitoring the Most Critical Error-based Failures in Carpet Production by Failure - Mode - and - Effects Analysis}, journal = {Journal of Textile Science and Technology}, volume = {2}, number = {4}, pages = {223-227}, year = {2013}, publisher = {Today Textile Institute}, issn = {2151-7162}, eissn = {2322-2417}, doi = {}, abstract = {There is always a probability of recurring failures in a manufacturing system. These failures disturb the output of a system quantitatively and qualitatively, and on the whole they are menace to the system's productivity. This paper introduces a technique called "failure-mode-and-effects analysis (FMEA)" to recognize or monitor and reduce harmful effects of the most critical errors in a carpet manufacturing system. This method requires a team of inspecting members to discuss the type of failures and their potential risk by classifying each failure under a grade called "risk priority number (RPN)". The failures with highest RPN are the most critical type of failures for which corrective actions must be preferentially taken to increase the quality of the production. In this research work, FMEA technique is adopted in a carpet manufacturing system to evaluate and monitor the type and quality of the failures, while presenting solutions to eliminate them most effectively.}, keywords = {Quality,Carpet,Identification of Failure,Critical}, title_fa = {شناسایی بحرانی ترین خطاها در تولید فرش ماشینی با استفاده از روش تحلیل خطاهای بالقوه و آثار آن ها}, abstract_fa = {در یک سامانه تولیدی همواره احتمال وقوع بسیاری از خطاها وجود دارد. این خطاها بر خروجی سامانه از نظر کمی و کیفی مؤثرند و هریک تهدیدی برای آن به‌ شمار می‌ رود. در این مقاله، روشی کاربردی به نام تحلیل خطاهای بالقوه و آثار آن‌ ها برای شناسایی بحرانی‌ ترین خطاها و کاهش آثار مخرب آن‌ ها در یک سامانه تولید فرش ماشینی معرفی شده است. اجرای این روش به گروهی متشکل از اعضای سامانه نیاز دارد تا با بحث درباره خطاهای بالقوه و آثار آن‌ها به هر خطا عددی موسوم به عدد اولویت خطر اختصاص داده شود. خطاهایی که دارای بزرگ‌ترین عدد اولویت خطر هستند، بحرانی‌ ترین خطاها محسوب شده و اقدامات اصلاحی برای ارتقای کیفیت محصول، باید از آن‌ ها شروع شود. در این کار پژوهشی، با استفاده از این شیوه، یک سامانه تولید فرش ماشینی ارزیابی شده و بحرانی‌ ترین خطاهای موجود در آن، شناسایی شده و راهکارهایی برای بهبود کیفیت فرش‌ های تولیدی ارائه شده است.}, keywords_fa = {کیفیت,فرش,شناسایی خطا,بحرانی}, url = {https://www.jtst.ir/article_2845.html}, eprint = {https://www.jtst.ir/article_2845_5df7839a211ba7e736dbb8269c68f8e0.pdf} } @article { author = {Haghighat, Nasrin and Tavanaie, Mohammad Ali and Safi, Mahdi and Najafi, Farhood}, title = {Spinnability and Tensile Properties of Poly(ethylene terephthalate) Fibers Blended with Polymeric Ionic Liquids in Melt Spinning Process}, journal = {Journal of Textile Science and Technology}, volume = {2}, number = {4}, pages = {229-235}, year = {2013}, publisher = {Today Textile Institute}, issn = {2151-7162}, eissn = {2322-2417}, doi = {}, abstract = {Ionic liquids (ILs) with unique properties such as low melting point, high thermal stability, electrical conductivity, good solubility etc. are widely used as the environment-friendly solvents. Studies show that the use of ionic liquids is a new effort in textile industry and basic research, as these are applied as green solvents in solution spinning of the viscous fibers in industrial scale. In this study, blending of some polymeric ionic liquids (PIL) with poly(ethylene terephthalate) (PET) was examined by melt spinning process to produce PET/PIL fibers. Also the mechanical properties of the melt spun fibers were evaluated. The results showed that addition of polymeric ionic liquids to PET during the melt spinning process would cause complications due to high moisture absorption and hydrolysis of PILs. The melt viscosity of PET/PILs in melt process dropped significantly. The viscosity reduction of the blends was prevented using a polymeric chain extender. Also the cationic laurylurethane trimethylene was considered an appropriate polymeric ionic liquid which showed the lowest adverse effect on the mechanical properties of PET/PILs fibers in an optimized composition.}, keywords = {Polymeric ionic liquids,poly(ethylene terephthalate) fibers,spinnability,tensile properties}, title_fa = {قابلیت ریسندگی و خواص کششی الیاف پلی (اتیلن ترفتالات) با اختلاط سیالات یونی پلیمری حین فرایند مذاب ریسی}, abstract_fa = {سیالات یونی با داشتن خواص ویژه‌ ای چون دمای ذوب کم، پایداری گرمایی زیاد، رسانایی الکتریکی زیاد و سایر خواص به‌ ویژه به عنوان حلال‌ های دوست‌ دار محیط زیست استفاده می شوند. مطالعات نشان می‌ دهد، استفاده از این مواد در صنعت نساجی بسیار جدید است. به‌ طوری که استفاده از سیال یونی در فرایند محلول‌ ریسی الیاف ویسکوز به عنوان حلال سلولوز تا این زمان، تنها کاربرد صنعتی این ماده در صنعت نساجی بوده است. در این پژوهش، امکان آمیخته‌ کردن پلی‌ (اتیلن ترفتالات) با برخی سیالات یونی پلیمری حین فرایند مذاب‌ ریسی برای تولید الیاف پلی‌ (اتیلن ترفتالات)، بررسی شده و خواص کششی الیاف ارزیابی شده است. نتایج نشان داد، سیالات یونی پلیمری به دلیل حساسیت به رطوبت، شرایط بسیار سختی را در اختلاط با پلی‌ (اتیلن ترفتالات) در فرایند مذاب‌ ریسی به‌ وجود می‌ آورند. گرانروی آمیخته پلی‌ (اتیلن ترفتالات) و سیالات یونی پلیمری حین فرایند مذاب به‌ طور چشمگیری کاهش یافت. با استفاده از زنجیرافزای پلیمری مناسب از کاهش گرانروی ممانعت شد. همچنین ملاحظه شد، از بین سیالات یونی پلیمری به‌ کار رفته، سیال کاتیونی (لائووریل اورتان) تری‌ متیلن مناسب‌ ترین سیال یونی پلیمری است، به‌ طوری که در یک ترکیب درصد بهینه، کمترین اثر منفی را بر خواص کششی برجای گذاشت.}, keywords_fa = {سیال یونی پلیمری,الیاف پلی (اتیلن ترفتالات),قابلیت ریسندگی,خواص کششی}, url = {https://www.jtst.ir/article_2846.html}, eprint = {https://www.jtst.ir/article_2846_81d878c1c9c65feb315c8de0293dccd8.pdf} }