@article { author = {رضایی, فرشته and Payvandy, Pedram and ابراهیمی, سعید}, title = {Simulation of the Fabric Drape Behavior Using the Mass-Spring Model}, journal = {Journal of Textile Science and Technology}, volume = {4}, number = {4}, pages = {3-11}, year = {2015}, publisher = {Today Textile Institute}, issn = {2151-7162}, eissn = {2322-2417}, doi = {}, abstract = {Simulation of fabric drape behavior is one of the attractive topics in many fields including textile and computer engineering. Various methods have been proposed by researchers for simulation of fabric drape behavior that among them, the simulation based on mass-spring model has found wider application as a result of higher speed of simulation and flexibility. In this research, a mass-spring model has been proposed for simulation of woven fabric draping behavior. The fabric drape results obtained from simulation for a series of plain woven fabric with different sizes and weft densities were compared with the experimental results obtained from the image processing method. The results of simulation and experiment had the best fi (correlation ~91%) for the fabric with the highest density of weft) 28 wefts per centimeter) and smallest dimensions) 10×10 cm2).}, keywords = {drape simulation,mass-spring model,image processing}, title_fa = {شبیه سازی رفتار آویزش پارچه با استفاده از مدل جرم و فنر}, abstract_fa = {شبیه سازی رفتار آویزش پارچه از موضوعات مورد توجه در بسیاری از رشته ها از جمله مهندسی نساجی و رایانه است. روش های  گوناگونی برای شبیه سازی رفتار آویزش پارچه توسط پژوهشگران ارائه شده است که از میان آن ها شبیه سازی براساس مدل جرم و فنر به دلیل سرعت و انعطاف پذیری، کاربرد گسترده تری دارد. در این پژوهش، یک مدل جرم و فنر برای شبیه سازی رفتار آویزش پارچه تاری پودی ارائه شده است. سپس، نتایج شبیه سازی حاصل از مدل برای پارچه با بافت تافته و تراکم پودی و ابعاد متفاوت با نتایج تجربی حاصل از اندازه گیری آویزش پارچه با استفاده از روش پردازش تصویر مقایسه شد. نتایج حاصل از این پژوهش نشان داد، شبیه سازی برای پارچه با بیشترین تراکم پودی(28پود در سانتی متر) و کمترین ابعاد (cm2 10*10) دارای بهترین تطابق با نتایج تجربی به مقدار %46/ 91 است.}, keywords_fa = {شبیه سازی آویزش,مدل جرم و فنر,پردازش تصویر}, url = {https://www.jtst.ir/article_10500.html}, eprint = {https://www.jtst.ir/article_10500_71f12c7e328c736f6b5a8774af4547bb.pdf} } @article { author = {Jafari, Razieh}, title = {A review on methods of measurement of sensory attributes}, journal = {Journal of Textile Science and Technology}, volume = {4}, number = {4}, pages = {13-22}, year = {2015}, publisher = {Today Textile Institute}, issn = {2151-7162}, eissn = {2322-2417}, doi = {}, abstract = {One of the most important discussions in psychophysics is related to the measurement and quantifying of the variations in sensory reactions. In a sensory system which physical stimuli are entries and sensations are the outcomes, the measurement functions will be achievable while both the stimuli and sensory reactions are measurable. In color science, the mentioned functions could be applied to investigate the color difference formulae, the color emotion of observers, the way of representing an index to evaluate the objects’ color and so on. The application of these functions in textile area is related to investigate the fabric structural properties based on sensory parameters, i.e., fabric handle attribute, softness and fineness. It is noticeable that the final result is based on quantifying of perceived sensory attributes. Clearly, it is difficult to perceive and quantify these psychophysical phenomena. On the other hand, in order to avoid serious errors, unsuitable computation and incorrect results, it is necessary for a researcher to know the measurement methods and the corresponded scales to analyze the achieved data. In this way, the paper tries to review the measurement methods as well as the manner of allocation of scales to sensory attributes.}, keywords = {Sensory attributes,Scale values,Pair comparison method,Rank ordering method}, title_fa = {مروری بر روش های اندازه گیری ویژگی های حسی}, abstract_fa = {یکی از مباحث عمده در حوزه علوم روان-فیزیک به اندازه گیری مقدار تغییرات در واکنش های حسی مربوط می شود. در سامانه حسی که محرکه های فیزیکی، ورودی ها و احساسات خروجی ها را تشکیل می دهند توابع اندازه گیری فقط به شرط قابلیت اندازه گیری محرکه ها و پاسخ های حسی قابل دستیابی هستند. از جمله کاربردهای چنین توابعی در علوم رنگ و نساجی می توان به بررسی فرمول های اختلاف رنگ، پژوهش در باره احساس رنگی افراد، ارائه شاخص های ارزیاب رنگ، بررسی ویژگی های ساختاری منسوج بر اساس پارامترهای حسی نظیر زیردست، نرمی و لطافت اشاره کرد که همگی مبتنی بر کمی کردن ویژگی های حسی درک شده است. بدیهی است، درک و بیان کمی چنین پدیده هایی که در ارتباط مستقیم با مفاهیم روان-فیزیک هستند به سادگی امکان پذیر نیست. از سوی دیگر، برای پرهیز از خطاهای جدی، انجام محاسبات نامناسب و نیز نتیجه گیری غلط، ضروری است که پژوهشگر، شناخت کافی از روش اندازه گیری و نوع مقیاس لازم برای تجزیه و تحلیل اندازه گیری ها را داشته باشد. در این راستا پژوهش حاضر، مروری کوتاه بر روش های اندازه گیری ویژگی های حسی و نحوه مقیاس دهی به آنها را ارائه می کند.}, keywords_fa = {ویژگیهای حسی,مقادیر مقیاس,روش مقایسه جفتها,روش رتبه‌بندی منظم}, url = {https://www.jtst.ir/article_10501.html}, eprint = {https://www.jtst.ir/article_10501_664d1fff924bf051ed3d51bf3b880ef4.pdf} } @article { author = {اردشیری, مهدیه and صابری مطلق, محمود and متقی طلب, وحید}, title = {Effect of Oxygen Plasma on the Polyester Coating with Conical Copper Nanorods}, journal = {Journal of Textile Science and Technology}, volume = {4}, number = {4}, pages = {23-29}, year = {2015}, publisher = {Today Textile Institute}, issn = {2151-7162}, eissn = {2322-2417}, doi = {}, abstract = {The current study focuses on the effect of surface pretreatment on the physical properties and surface morphology of the coated fabric with copper nanoparticles. The pretreatment steps were carried out using alkaline hydrolysis and oxygen plasma etching. The deposition of copper nanoparticles was achieved by the chemical reduction of copper ions by utilizing reducing agent from its salt solution. The scanning electron microscopy )SEM(and Fourier transform infrared spectroscopy )FTIR) were used respectively for detailed investigation of surface morphology and chemical structure of the pretreated and the coated fabric. The surface electrical resistance was measured using a digital multi meter based on two point probe technique. Interestingly, the microscopic images showed the formation of copper conical nanorods for the fabric pretreated with oxygen plasma and pseudo-spherical nanoparticles for the alkaline hydrolyzed fabric sample. The FTIR spectroscopy data for plasma treated fabric demonstrates the higher peak intensity for OH functional group compared to that for the alkaline hydrolyzed pretreated fabric. The acquired experimental results confirmed a uniform copper nanorods coating and lower surface resistance for the samples treated with oxygen plasma compared to those treated with alkaline hydrolysis.}, keywords = {Plasma treatment,polyester fabric,Chemical hydrolysis,Copper nanorod,Resistivity}, title_fa = {اثر پلاسمای اکسیژن بر پوشش دهی پلی استر با نانو میله های مخروطی مس}, abstract_fa = {مطالعه حاضر، روی مقدار اثر فرایندهای مقدماتی بر خواص فیزیکی و شکل شناسی سطحی پارچه پوشش داده شده با نانو ذرات مس متمرکز شده است. مراحل آماده سازی مقدماتی پارچه به دو روش آبکافت قلیایی و نیز حکاکی سطح با پلاسمای اکسیژن انجام شد. لایه نشانی نانو ذرات مس با کاهش شیمیایی یون های مس از محلول نمک فلزی آن با استفاده از عامل کاهنده انجام شد. روش های میکروسکوپ الکترونی پویشی و طیف سنجی زیرقرمز تبدیل فوریه برای بررسی دقیق ساختار شیمیایی و نیز شکل شناسی سطحی استفاده شد. مقاومت الکتریکی سطحی با دستگاه چهارکاونده ای اندازه گیری شد. تصاویر میکروسکوپی به شکل جالبی حاکی از تشکیل نانو میله های مخروطی مس برای پارچه عمل آوری شده با پلاسمای اکسیژن است. در مقایسه، پارچه عمل آوری شده با آبکافت قلیایی ذرات شبه کروی را در تصویر میکروسکوپی به خوبی نشان می دهند. نتایج طیف سنجی زیرقرمز برای پارچه عمل آوری شده با پلاسمای اکسیژن پیک شدیدتری را برای گروه عاملی هیدروکسیل در مقایسه با پارچه عمل آوری شده با قلیا نشان می دهد. نتایج تجربی، تشکیل پوششی یکنواخت از نانو میله های مس با مقاومت سطحی کمتر را برای پارچه عمل آوری شده با پلاسما در مقایسه با پارچه عمل آوری شده با قلیا تأیید می کند.}, keywords_fa = {عمل آوری با پلاسما,پارچه پلی استر,آبکافت شیمیایی,نانومیله مس,مقاومت الکتریکی}, url = {https://www.jtst.ir/article_10502.html}, eprint = {https://www.jtst.ir/article_10502_330484886e4f87141382fd6ee588c67c.pdf} } @article { author = {bagheshahi, naime and Payvandy, Pedram and توانایی, محمد علی}, title = {A Review of Methods for Measuring Yarn Properties Using Image Processing}, journal = {Journal of Textile Science and Technology}, volume = {4}, number = {4}, pages = {31-44}, year = {2015}, publisher = {Today Textile Institute}, issn = {2151-7162}, eissn = {2322-2417}, doi = {}, abstract = {In recent years with the development of science, technology and considering the competitive market of textile industry, quality control, quantitative and qualitative measurement of yarn parameters, and prediction of the final products’ properties have found high importance. Nowadays, manufacturing companies are looking for computer vision and different algorithms for image processing as these methods do not need any complex and expensive devices)i.e. just by using a computer and a camera) and highly accurate results with low assessment errors can be obtained in a short time. In this study, the research works fon measuring the yarn parameters such as diameter, yarn hairiness, yarn twist, percent of wave in textured yarn, mixture percent in multi-member fibers, covering defect of core fibers, bulks of air-jet textured yarn, changing the shape of the fiber cross section in yarn and fiber defects using image processing are reviewed.}, keywords = {computer vision,image processing,yarn parameters}, title_fa = {مروری بر روش‌های اندازه‌گیری پارامترهای نخ با استفاده از پردازش تصویر}, abstract_fa = {در سال های اخیر با رشد علم و فناوری و ایجاد بازارهای رقابتی در صنعت نساجی، لزوم کنترل کیفیت و اندازه گیری پارامترهای کمی و کیفی و پیش بینی خواص محصول نهایی اهمیت بسزایی دارد. امروزه کارخانه های تولیدی به دنبال روش های بینایی رایانه ای و الگوریتم های مختلف پردازش تصویرند، چرا که در این روش ها نه تنها نیازی به استفاده از دستگاه های گران قیمت و پیچیده نیست، بلکه با استفاده از یک رایانه و یک دوربین، می توان به نتایج بسیار دقیق در کمترین زمان ممکن دست یافت و خطاهای ارزیابی را به حداقل ممکن رساند. در این بررسی، پژوهش های انجام شده در زمینه اندازه گیری پارامترهای نخ مانند قطر، پرز، تاب در متر نخ، درصد موج در نخ های تغییرشکل یافته (textured)، درصد مخلوط در نخ های چندجزئی، عیوب پوششی نخ های مغزی، بالک های نخ تغییرشکل یافته به وسیله جت هوا، تغییر شکل سطح مقطع الیاف پس از قرار گرفتن در نخ و شناسایی عیوب نخ با استفاده از پردازش تصویر مرور شد. در مقاله حاضر، این پارامترها تشریح و روش های به کار برده شده برای اندازه گیری آنها با استفاده از پردازش تصویر مطرح شد.}, keywords_fa = {بینایی رایانه ای,پردازش تصویر,پارامترهای نخ}, url = {https://www.jtst.ir/article_10503.html}, eprint = {https://www.jtst.ir/article_10503_074b426bf6f523e804f20bc61d1e1693.pdf} } @article { author = {Haji, Aminoddin and Mousavi Shoushtari, Ahmad}, title = {An introduction to plasma treatment and its applications in surface modification of polypropylene fibers}, journal = {Journal of Textile Science and Technology}, volume = {4}, number = {4}, pages = {45-54}, year = {2015}, publisher = {Today Textile Institute}, issn = {2151-7162}, eissn = {2322-2417}, doi = {}, abstract = {Plasma treatment is a fast and environmentally friendly process for surface modification of polymeric and textile materials. In this study, the various types of plasma treatment are introduced and the most effective parameters on the treatment are discussed. Furthermore, the application of cold plasma treatment on textile goods is briefly discussed and the research works on modification of polypropylene fibers are reviewed. The cold plasma treatment can improve the wettability, water absorption and adhesion of polypropylene fibers. The plasma treatment has been also used for grafting of different monomers, drug, and nanoparticles on the surface of polypropylene fibers.}, keywords = {Plasma,polypropylene,Surface modification,Grafting,Wettability}, title_fa = {مقدمه ای بر عمل آوری با پلاسما و کاربرد آن در اصلاح خواص سطحی الیاف پلی پروپیلن}, abstract_fa = {عمل آوری با پلاسما روشی سریع و دوست دار محیط زیست برای اصلاح خواص سطحی مواد پلیمری از جمله انواع کالاهای نساجی است. در این مقاله ضمن معرفی پلاسما و عوامل مهم این فرایند، انواع پلاسما از جنبه های گوناگون بررسی شده است. روش ها و دستگاه های مختلف تولید پلاسما معرفی و مزایا و معایب آنها بررسی و مقایسه شد. درادامه، موارد کاربرد عمل آوری پلاسمای سرد روی کالاهای نساجی به اجمال بیان شده و به عنوان مطالعه موردی، پژوهش های انجام شده درباره اصلاح الیاف پلی پروپیلن به کمک فناوری پلاسما بحث و بررسی شده است. این عمل آوری می تواند سبب بهبود ترشوندگی، جذب آب و چسبندگی در الیاف پلی پروپیلن شود. همچنین، از پلاسما برای پیوندزدن مونومرهای مختلف، دارو و نانوذرات بر سطح الیاف پلی پروپیلن استفاده شده که در این پژوهش نتایج پژوهش های مزبورنیز بررسی شده است.}, keywords_fa = {پلاسما,پلی پروپیلن,اصلاح سطح,پیوند زنی,ترشوندگی}, url = {https://www.jtst.ir/article_10504.html}, eprint = {https://www.jtst.ir/article_10504_e568c2740dcfe332e100fd5f3dca15e4.pdf} } @article { author = {Soltani, Ehsan}, title = {Small and Medium Enterprises and Iran’s Textile Industries}, journal = {Journal of Textile Science and Technology}, volume = {4}, number = {4}, pages = {55-58}, year = {2015}, publisher = {Today Textile Institute}, issn = {2151-7162}, eissn = {2322-2417}, doi = {}, abstract = {Entrepreneurs and small and medium enterprises (SMEs) are the engines of growth for developing economies. In the last quarter-century in Iran, the major industries, depending on the public and governmental sectors, have found a prominent role in the process of economic development, and in contrast SMEs in the private sector have faced increasing business cost and tighter restrictions on their activities. The growth of major industries has relied heavily on economic surplus based on natural resource and cheap energy and as a result it has not been efficient and economically effective. The main way out of the current economic downturn is to facilitate business activity and to reduce the business cost for SMEs, which naturally textile, clothing and leather enterprises, as the old and most important industries in Iran, will not be exempted from this.}, keywords = {textile industry,small enterprise,medium enterprise}, title_fa = {ظرفیت واحد های بالادستی صنعت نساجی در ایران صنایع کوچک و متوسط و صنعت نساجی ایران}, abstract_fa = {کارآفرینان و صنایع کوچک و متوسط موتور محرکه رشد همه اقتصادها به شمار می روند. در ربع قرن اخیر روند توسعه اقتصادی ایران، هر سال نقش صنایع بزرگ وابسته به بخش های عمومی و دولتی پررنگ تر شده و فضای کسب و کار برای صنایع کوچک و متوسط بخش خصوصی با افزایش هزینه های کسب و کار و تشدید تضییقات روی فعالیت آنها تنگ تر شده است. رشد صنایع بزرگ که با تکیه بر رانت های منابع طبیعی و انرژی ارزان شکل گرفته توأم با کارآمدی و کارآیی اقتصادی و کیفی نبوده است. راهکار اصلی برون رفت از رکود اقتصادی کنونی در تسهیل فعالیت و کاهش هزینه های کسب و کار صنایع کوچک و متوسط خواهد بود که به طور مسلم صنایع نساجی، پوشاک وچرم نیز به عنوان قدیمی ترین و مهم ترین بخش صنایع کوچک و متوسط از این موضوع مستثنی نخواهد بود.}, keywords_fa = {صنعت نساجی,کارآفرین کوچک,کارآفرین متوسط}, url = {https://www.jtst.ir/article_10505.html}, eprint = {https://www.jtst.ir/article_10505_9d02cdd0721023254769f55485be81a0.pdf} }